[PATCH] Typo fixes

Fix a lot of typos.  Eyeballed by jmc@ in OpenBSD.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Documentation/m68k/README.buddha

@@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to
 $48, while it doesn't matter how often you're writing to $4a
 as  long as $48 is not touched.  After $48 has been written,
 the  whole card disappears from $e8 and is mapped to the new
-address just written.  Make shure $4a is written before $48,
+address just written.  Make sure $4a is written before $48,
 otherwise your chance is only 1:16 to find the board :-).
 
 The local memory-map is even active when mapped to $e8:

Documentation/networking/ifenslave.c

@@ -87,7 +87,7 @@
  *	   would fail and generate an error message in the system log.
  * 	 - For opt_c: slave should not be set to the master's setting
  *	   while it is running. It was already set during enslave. To
- *	   simplify things, it is now handeled separately.
+ *	   simplify things, it is now handled separately.
  *
  *    - 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
  *	 - Code cleanup and style changes

arch/arm/lib/copy_template.S

@@ -236,7 +236,7 @@
 
 
 /*
- * Abort preanble and completion macros.
+ * Abort preamble and completion macros.
  * If a fixup handler is required then those macros must surround it.
  * It is assumed that the fixup code will handle the private part of
  * the exit macro.

drivers/char/mxser.h

@@ -118,7 +118,7 @@
 
 // enable CTS interrupt
 #define MOXA_MUST_IER_ECTSI		0x80
-// eanble RTS interrupt
+// enable RTS interrupt
 #define MOXA_MUST_IER_ERTSI		0x40
 // enable Xon/Xoff interrupt
 #define MOXA_MUST_IER_XINT		0x20

drivers/char/synclink.c

@@ -5996,7 +5996,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
 	 * <15..8>	?		RxFIFO IRQ Request Level
 	 *
 	 * Note: For async mode the receive FIFO level must be set
-	 * to 0 to aviod the situation where the FIFO contains fewer bytes
+	 * to 0 to avoid the situation where the FIFO contains fewer bytes
 	 * than the trigger level and no more data is expected.
 	 *
 	 * <7>		0		Exited Hunt IA (Interrupt Arm)

drivers/edac/edac_mc.c

@@ -2044,7 +2044,7 @@ static int __init edac_mc_init(void)
 	 */
 	clear_pci_parity_errors();
 
-	/* Create the MC sysfs entires */
+	/* Create the MC sysfs entries */
 	if (edac_sysfs_memctrl_setup()) {
 		edac_printk(KERN_ERR, EDAC_MC,
 			"Error initializing sysfs code\n");

drivers/net/irda/nsc-ircc.c

@@ -812,7 +812,7 @@ static int nsc_ircc_init_39x(nsc_chip_t *chip, chipio_t *info)
 	int cfg_base = info->cfg_base;
 	int enabled;
 
-	/* User is shure about his config... accept it. */
+	/* User is sure about his config... accept it. */
 	IRDA_DEBUG(2, "%s(): nsc_ircc_init_39x (user settings): "
 		   "io=0x%04x, irq=%d, dma=%d\n", 
 		   __FUNCTION__, info->fir_base, info->irq, info->dma);

drivers/net/sis900.c

@@ -2283,7 +2283,7 @@ static void set_rx_mode(struct net_device *net_dev)
 	int i, table_entries;
 	u32 rx_mode;
 
-	/* 635 Hash Table entires = 256(2^16) */
+	/* 635 Hash Table entries = 256(2^16) */
 	if((sis_priv->chipset_rev >= SIS635A_900_REV) ||
 			(sis_priv->chipset_rev == SIS900B_900_REV))
 		table_entries = 16;

drivers/net/tulip/de4x5.c

@@ -513,7 +513,7 @@ struct mii_phy {
     u_char  *rst;           /* Start of reset sequence in SROM           */
     u_int mc;               /* Media Capabilities                        */
     u_int ana;              /* NWay Advertisement                        */
-    u_int fdx;              /* Full DupleX capabilites for each media    */
+    u_int fdx;              /* Full DupleX capabilities for each media   */
     u_int ttm;              /* Transmit Threshold Mode for each media    */
     u_int mci;              /* 21142 MII Connector Interrupt info        */
 };

drivers/net/tulip/pnic2.c

@@ -199,7 +199,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)
 	               /* negotiation ended successfully */
 
 	               /* get the link partners reply and mask out all but
-                        * bits 24-21 which show the partners capabilites
+                        * bits 24-21 which show the partners capabilities
                         * and match those to what we advertised
                         *
                         * then begin to interpret the results of the negotiation.

drivers/net/typhoon.c

@@ -208,7 +208,7 @@ static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
 };
 
 /* Notes on the new subsystem numbering scheme:
- * bits 0-1 indicate crypto capabilites: (0) variable, (1) DES, or (2) 3DES
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
  * bit 4 indicates if this card has secured firmware (we don't support it)
  * bit 8 indicates if this is a (0) copper or (1) fiber card
  * bits 12-16 indicate card type: (0) client and (1) server
@@ -788,7 +788,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
 	/* we have two rings to choose from, but we only use txLo for now
 	 * If we start using the Hi ring as well, we'll need to update
 	 * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
-	 * and TXHI_ENTIRES to match, as well as update the TSO code below
+	 * and TXHI_ENTRIES to match, as well as update the TSO code below
 	 * to get the right DMA address
 	 */
 	txRing = &tp->txLoRing;

drivers/net/wireless/orinoco.c

@@ -3858,7 +3858,7 @@ static int orinoco_ioctl_setscan(struct net_device *dev,
 	unsigned long flags;
 
 	/* Note : you may have realised that, as this is a SET operation,
-	 * this is priviledged and therefore a normal user can't
+	 * this is privileged and therefore a normal user can't
 	 * perform scanning.
 	 * This is not an error, while the device perform scanning,
 	 * traffic doesn't flow, so it's a perfect DoS...

drivers/net/wireless/prism54/isl_ioctl.c

@@ -747,7 +747,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
 
 	if (essid->length) {
 		dwrq->flags = 1;	/* set ESSID to ON for Wireless Extensions */
-		/* if it is to big, trunk it */
+		/* if it is too big, trunk it */
 		dwrq->length = min((u8)IW_ESSID_MAX_SIZE, essid->length);
 	} else {
 		dwrq->flags = 0;

drivers/scsi/3w-9xxx.c

@@ -1026,7 +1026,7 @@ static void twa_free_request_id(TW_Device_Extension *tw_dev, int request_id)
 	tw_dev->free_tail = (tw_dev->free_tail + 1) % TW_Q_LENGTH;
 } /* End twa_free_request_id() */
 
-/* This function will get parameter table entires from the firmware */
+/* This function will get parameter table entries from the firmware */
 static void *twa_get_param(TW_Device_Extension *tw_dev, int request_id, int table_id, int parameter_id, int parameter_size_bytes)
 {
 	TW_Command_Full *full_command_packet;

drivers/serial/8250.c

@@ -1528,7 +1528,7 @@ static int serial8250_startup(struct uart_port *port)
 
 	/*
 	 * Clear the FIFO buffers and disable them.
-	 * (they will be reeanbled in set_termios())
+	 * (they will be reenabled in set_termios())
 	 */
 	serial8250_clear_fifos(up);
 

drivers/serial/serial_txx9.c

@@ -483,7 +483,7 @@ static int serial_txx9_startup(struct uart_port *port)
 
 	/*
 	 * Clear the FIFO buffers and disable them.
-	 * (they will be reeanbled in set_termios())
+	 * (they will be reenabled in set_termios())
 	 */
 	sio_set(up, TXX9_SIFCR,
 		TXX9_SIFCR_TFRST | TXX9_SIFCR_RFRST | TXX9_SIFCR_FRSTE);

drivers/serial/sunsu.c

@@ -641,7 +641,7 @@ static int sunsu_startup(struct uart_port *port)
 
 	/*
 	 * Clear the FIFO buffers and disable them.
-	 * (they will be reeanbled in set_termios())
+	 * (they will be reenabled in set_termios())
 	 */
 	if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);

drivers/usb/host/ohci-s3c2410.c

@@ -158,7 +158,7 @@ static int ohci_s3c2410_hub_control (
 		"s3c2410_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
 		hcd, typeReq, wValue, wIndex, buf, wLength);
 
-	/* if we are only an humble host without any special capabilites
+	/* if we are only an humble host without any special capabilities
 	 * process the request straight away and exit */
 
 	if (info == NULL) {

drivers/usb/net/zaurus.c

@@ -217,7 +217,7 @@ static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 			 * with devices that use it and those that don't.
 			 */
 			if ((detail->bDetailData[1] & ~0x02) != 0x01) {
-				/* bmDataCapabilites == 0 would be fine too,
+				/* bmDataCapabilities == 0 would be fine too,
 				 * but framing is minidriver-coupled for now.
 				 */
 bad_detail:

fs/mbcache.c

@@ -311,7 +311,7 @@ fail:
 /*
  * mb_cache_shrink()
  *
- * Removes all cache entires of a device from the cache. All cache entries
+ * Removes all cache entries of a device from the cache. All cache entries
  * currently in use cannot be freed, and thus remain in the cache. All others
  * are freed.
  *