Merge tag 'spi-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi fixes from Mark Brown:
 "A few driver and documentation fixes, plus a fix for double error
  handling which had crept in due to the confusing documentation - it
  wasn't clear if the core or the driver was responsible for cleanup in
  error cases so both tried to do it with unfortunate results"

* tag 'spi-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: nuc900: Set SPI_LSB_FIRST for master->mode_bits if hw->pdata->lsb is true
  spi: rspi: Document support for Renesas QSPI in Kconfig
  spi: Fix crash with double message finalisation on error handling
  spi: correct the transfer_one_message documentation wording
  spi: document the transfer_one spi_master callback
  spi: spi.h: clarify the documentation of transfer_one

Documentation/spi/spi-summary

@@ -543,7 +543,22 @@ SPI MASTER METHODS
 	queuing transfers that arrive in the meantime. When the driver is
 	finished with this message, it must call
 	spi_finalize_current_message() so the subsystem can issue the next
-	transfer. This may sleep.
+	message. This may sleep.
+
+    master->transfer_one(struct spi_master *master, struct spi_device *spi,
+			 struct spi_transfer *transfer)
+	The subsystem calls the driver to transfer a single transfer while
+	queuing transfers that arrive in the meantime. When the driver is
+	finished with this transfer, it must call
+	spi_finalize_current_transfer() so the subsystem can issue the next
+	transfer. This may sleep. Note: transfer_one and transfer_one_message
+	are mutually exclusive; when both are set, the generic subsystem does
+	not call your transfer_one callback.
+
+	Return values:
+	negative errno: error
+	0: transfer is finished
+	1: transfer is still in progress
 
     DEPRECATED METHODS
 

drivers/spi/Kconfig

@@ -376,10 +376,10 @@ config SPI_PXA2XX_PCI
 	def_tristate SPI_PXA2XX && PCI
 
 config SPI_RSPI
-	tristate "Renesas RSPI controller"
+	tristate "Renesas RSPI/QSPI controller"
 	depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE
 	help
-	  SPI driver for Renesas RSPI blocks.
+	  SPI driver for Renesas RSPI and QSPI blocks.
 
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"

drivers/spi/spi-nuc900.c

@@ -361,6 +361,8 @@ static int nuc900_spi_probe(struct platform_device *pdev)
 	init_completion(&hw->done);
 
 	master->mode_bits          = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+	if (hw->pdata->lsb)
+		master->mode_bits |= SPI_LSB_FIRST;
 	master->num_chipselect     = hw->pdata->num_cs;
 	master->bus_num            = hw->pdata->bus_num;
 	hw->bitbang.master         = hw->master;

drivers/spi/spi.c

@@ -755,9 +755,7 @@ static void spi_pump_messages(struct kthread_work *work)
 	ret = master->transfer_one_message(master, master->cur_msg);
 	if (ret) {
 		dev_err(&master->dev,
-			"failed to transfer one message from queue: %d\n", ret);
+			"failed to transfer one message from queue\n");
-		master->cur_msg->status = ret;
-		spi_finalize_current_message(master);
 		return;
 	}
 }

include/linux/spi/spi.h

@@ -273,7 +273,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *	message while queuing transfers that arrive in the meantime. When the
  *	driver is finished with this message, it must call
  *	spi_finalize_current_message() so the subsystem can issue the next
- *	transfer
+ *	message
  * @unprepare_transfer_hardware: there are currently no more messages on the
  *	queue so the subsystem notifies the driver that it may relax the
  *	hardware by issuing this call
@@ -287,7 +287,10 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv)
  *                  - return 1 if the transfer is still in progress. When
  *                    the driver is finished with this transfer it must
  *                    call spi_finalize_current_transfer() so the subsystem
- *                    can issue the next transfer
+ *                    can issue the next transfer. Note: transfer_one and
+ *                    transfer_one_message are mutually exclusive; when both
+ *                    are set, the generic subsystem does not call your
+ *                    transfer_one callback.
  * @unprepare_message: undo any work done by prepare_message().
  * @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
  *	number. Any individual value may be -ENOENT for CS lines that