Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull, it has a shared branch with some alsa
  crossover but everything should be acked by relevant people.

  New drivers:
     - ATMEL HLCDC driver
     - designware HDMI core support (used in multiple SoCs).

  core:
     - lots more atomic modesetting work, properties and atomic ioctl
       (hidden under option)
     - bridge rework allows support for Samsung exynos chromebooks to
       work finally.
     - some more panels supported

  i915:
     - atomic plane update support
     - DSI uses shared DSI infrastructure
     - Skylake basic support is all merged now
     - component framework used for i915/snd-hda interactions
     - write-combine cpu memory mappings
     - engine init code refactored
     - full ppgtt enabled where execlists are enabled.
     - cherryview rps/gpu turbo and pipe CRC support.

  radeon:
     - indirect draw support for evergreen/cayman
     - SMC and manual fan control for SI/CI
     - Displayport audio support

  amdkfd:
     - SDMA usermode queue support
     - replace suballocator usage with more suitable one
     - rework for allowing interfacing to more than radeon

  nouveau:
     - major renaming in prep for later splitting work
     - merge arm platform driver into nouveau
     - GK20A reclocking support

  msm:
     - conversion to atomic modesetting
     - YUV support for mdp4/5
     - eDP support
     - hw cursor for mdp5

  tegra:
     - conversion to atomic modesetting
     - better suspend/resume support for child devices

  rcar-du:
     - interlaced support

  imx:
     - move to using dw_hdmi shared support
     - mode_fixup support

  sti:
     - DVO support
     - HDMI infoframe support

  exynos:
     - refactoring and cleanup, removed lots of internal unnecessary
       abstraction
     - exynos7 DECON display controller support

  Along with the usual bunch of fixes, cleanups etc"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits)
  drm/radeon: fix voltage setup on hawaii
  drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary
  drm/radeon: only enable kv/kb dpm interrupts once v3
  drm/radeon: workaround for CP HW bug on CIK
  drm/radeon: Don't try to enable write-combining without PAT
  drm/radeon: use 0-255 rather than 0-100 for pwm fan range
  drm/i915: Clamp efficient frequency to valid range
  drm/i915: Really ignore long HPD pulses on eDP
  drm/exynos: Add DECON driver
  drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL
  drm/i915: Insert a command barrier on BLT/BSD cache flushes
  drm/i915: Drop vblank wait from intel_dp_link_down
  drm/exynos: fix NULL pointer reference
  drm/exynos: remove exynos_plane_dpms
  drm/exynos: remove mode property of exynos crtc
  drm/exynos: Remove exynos_plane_dpms() call with no effect
  drm/i915: Squelch overzealous uncore reset WARN_ON
  drm/i915: Take runtime pm reference on hangcheck_info
  drm/i915: Correct the IOSF Dev_FN field for IOSF transfers
  drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage
  ...

Documentation/DocBook/drm.tmpl

@@ -239,6 +239,14 @@
               Driver supports dedicated render nodes.
             </para></listitem>
           </varlistentry>
+          <varlistentry>
+            <term>DRIVER_ATOMIC</term>
+            <listitem><para>
+              Driver supports atomic properties.  In this case the driver
+              must implement appropriate obj->atomic_get_property() vfuncs
+              for any modeset objects with driver specific properties.
+            </para></listitem>
+          </varlistentry>
         </variablelist>
       </sect3>
       <sect3>
@@ -1377,7 +1385,7 @@ int max_width, max_height;</synopsis>
       <itemizedlist>
         <listitem>
         DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC.  Primary
-        planes are the planes operated upon by by CRTC modesetting and flipping
+        planes are the planes operated upon by CRTC modesetting and flipping
         operations described in <xref linkend="drm-kms-crtcops"/>.
         </listitem>
         <listitem>
@@ -2362,6 +2370,7 @@ void intel_crt_init(struct drm_device *dev)
     </sect2>
     <sect2>
       <title>Modeset Helper Functions Reference</title>
+!Iinclude/drm/drm_crtc_helper.h
 !Edrivers/gpu/drm/drm_crtc_helper.c
 !Pdrivers/gpu/drm/drm_crtc_helper.c overview
     </sect2>
@@ -2564,8 +2573,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="25" valign="top" >DRM</td>
-	<td rowspan="4" valign="top" >Generic</td>
+	<td rowspan="36" valign="top" >DRM</td>
+	<td rowspan="5" valign="top" >Connector</td>
 	<td valign="top" >“EDID”</td>
 	<td valign="top" >BLOB | IMMUTABLE</td>
 	<td valign="top" >0</td>
@@ -2594,7 +2603,14 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Contains tiling information for a connector.</td>
 	</tr>
 	<tr>
-	<td rowspan="1" valign="top" >Plane</td>
+	<td valign="top" >“CRTC_ID”</td>
+	<td valign="top" >OBJECT</td>
+	<td valign="top" >DRM_MODE_OBJECT_CRTC</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >CRTC that connector is attached to (atomic)</td>
+	</tr>
+	<tr>
+	<td rowspan="11" valign="top" >Plane</td>
 	<td valign="top" >“type”</td>
 	<td valign="top" >ENUM | IMMUTABLE</td>
 	<td valign="top" >{ "Overlay", "Primary", "Cursor" }</td>
@@ -2602,6 +2618,76 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Plane type</td>
 	</tr>
 	<tr>
+	<td valign="top" >“SRC_X”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout source x coordinate in 16.16 fixed point (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“SRC_Y”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout source y coordinate in 16.16 fixed point (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“SRC_W”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout source width in 16.16 fixed point (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“SRC_H”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout source height in 16.16 fixed point (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CRTC_X”</td>
+	<td valign="top" >SIGNED_RANGE</td>
+	<td valign="top" >Min=INT_MIN, Max=INT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout CRTC (destination) x coordinate (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CRTC_Y”</td>
+	<td valign="top" >SIGNED_RANGE</td>
+	<td valign="top" >Min=INT_MIN, Max=INT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout CRTC (destination) y coordinate (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CRTC_W”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout CRTC (destination) width (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CRTC_H”</td>
+	<td valign="top" >RANGE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout CRTC (destination) height (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“FB_ID”</td>
+	<td valign="top" >OBJECT</td>
+	<td valign="top" >DRM_MODE_OBJECT_FB</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >Scanout framebuffer (atomic)</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CRTC_ID”</td>
+	<td valign="top" >OBJECT</td>
+	<td valign="top" >DRM_MODE_OBJECT_CRTC</td>
+	<td valign="top" >Plane</td>
+	<td valign="top" >CRTC that plane is attached to (atomic)</td>
+	</tr>
+	<tr>
 	<td rowspan="2" valign="top" >DVI-I</td>
 	<td valign="top" >“subconnector”</td>
 	<td valign="top" >ENUM</td>
@@ -3883,6 +3969,7 @@ int num_ioctls;</synopsis>
         <title>Runtime Power Management</title>
 !Pdrivers/gpu/drm/i915/intel_runtime_pm.c runtime pm
 !Idrivers/gpu/drm/i915/intel_runtime_pm.c
+!Idrivers/gpu/drm/i915/intel_uncore.c
       </sect2>
       <sect2>
         <title>Interrupt Handling</title>
@@ -3931,6 +4018,11 @@ int num_ioctls;</synopsis>
 	  framebuffer compression and panel self refresh.
         </para>
       </sect2>
+      <sect2>
+        <title>Atomic Plane Helpers</title>
+!Pdrivers/gpu/drm/i915/intel_atomic_plane.c atomic plane helpers
+!Idrivers/gpu/drm/i915/intel_atomic_plane.c
+      </sect2>
       <sect2>
         <title>Output Probing</title>
         <para>
@@ -3949,6 +4041,11 @@ int num_ioctls;</synopsis>
 	<title>Panel Self Refresh PSR (PSR/SRD)</title>
 !Pdrivers/gpu/drm/i915/intel_psr.c Panel Self Refresh (PSR/SRD)
 !Idrivers/gpu/drm/i915/intel_psr.c
+      </sect2>
+      <sect2>
+	<title>Frame Buffer Compression (FBC)</title>
+!Pdrivers/gpu/drm/i915/intel_fbc.c Frame Buffer Compression (FBC)
+!Idrivers/gpu/drm/i915/intel_fbc.c
       </sect2>
       <sect2>
         <title>DPIO</title>
@@ -4052,12 +4149,33 @@ int num_ioctls;</synopsis>
         <title>Batchbuffer Parsing</title>
 !Pdrivers/gpu/drm/i915/i915_cmd_parser.c batch buffer command parser
 !Idrivers/gpu/drm/i915/i915_cmd_parser.c
+      </sect2>
+      <sect2>
+        <title>Batchbuffer Pools</title>
+!Pdrivers/gpu/drm/i915/i915_gem_batch_pool.c batch pool
+!Idrivers/gpu/drm/i915/i915_gem_batch_pool.c
       </sect2>
       <sect2>
         <title>Logical Rings, Logical Ring Contexts and Execlists</title>
 !Pdrivers/gpu/drm/i915/intel_lrc.c Logical Rings, Logical Ring Contexts and Execlists
 !Idrivers/gpu/drm/i915/intel_lrc.c
       </sect2>
+      <sect2>
+        <title>Global GTT views</title>
+!Pdrivers/gpu/drm/i915/i915_gem_gtt.c Global GTT views
+!Idrivers/gpu/drm/i915/i915_gem_gtt.c
+      </sect2>
+      <sect2>
+        <title>Buffer Object Eviction</title>
+	<para>
+	  This section documents the interface function for evicting buffer
+	  objects to make space available in the virtual gpu address spaces.
+	  Note that this is mostly orthogonal to shrinking buffer objects
+	  caches, which has the goal to make main memory (shared with the gpu
+	  through the unified memory architecture) available.
+	</para>
+!Idrivers/gpu/drm/i915/i915_gem_evict.c
+      </sect2>
     </sect1>
 
     <sect1>

Documentation/devicetree/bindings/drm/atmel/hlcdc-dc.txt

@@ -0,0 +1,53 @@
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) DRM driver
+
+The Atmel HLCDC Display Controller is subdevice of the HLCDC MFD device.
+See ../mfd/atmel-hlcdc.txt for more details.
+
+Required properties:
+ - compatible: value should be "atmel,hlcdc-display-controller"
+ - pinctrl-names: the pin control state names. Should contain "default".
+ - pinctrl-0: should contain the default pinctrl states.
+ - #address-cells: should be set to 1.
+ - #size-cells: should be set to 0.
+
+Required children nodes:
+ Children nodes are encoding available output ports and their connections
+ to external devices using the OF graph reprensentation (see ../graph.txt).
+ At least one port node is required.
+
+Example:
+
+	hlcdc: hlcdc@f0030000 {
+		compatible = "atmel,sama5d3-hlcdc";
+		reg = <0xf0030000 0x2000>;
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+		clock-names = "periph_clk","sys_clk", "slow_clk";
+		status = "disabled";
+
+		hlcdc-display-controller {
+			compatible = "atmel,hlcdc-display-controller";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0>;
+
+				hlcdc_panel_output: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+
+		hlcdc_pwm: hlcdc-pwm {
+			compatible = "atmel,hlcdc-pwm";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcd_pwm>;
+			#pwm-cells = <3>;
+		};
+	};

Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt

@@ -0,0 +1,50 @@
+DesignWare HDMI bridge bindings
+
+Required properties:
+- compatible: platform specific such as:
+   * "snps,dw-hdmi-tx"
+   * "fsl,imx6q-hdmi"
+   * "fsl,imx6dl-hdmi"
+   * "rockchip,rk3288-dw-hdmi"
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The HDMI interrupt number
+- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
+  as described in Documentation/devicetree/bindings/clock/clock-bindings.txt,
+  the clocks are soc specific, the clock-names should be "iahb", "isfr"
+-port@[X]: SoC specific port nodes with endpoint definitions as defined
+   in Documentation/devicetree/bindings/media/video-interfaces.txt,
+   please refer to the SoC specific binding document:
+    * Documentation/devicetree/bindings/drm/imx/hdmi.txt
+    * Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt
+
+Optional properties
+- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+	hdmi: hdmi@0120000 {
+		compatible = "fsl,imx6q-hdmi";
+		reg = <0x00120000 0x9000>;
+		interrupts = <0 115 0x04>;
+		gpr = <&gpr>;
+		clocks = <&clks 123>, <&clks 124>;
+		clock-names = "iahb", "isfr";
+		ddc-i2c-bus = <&i2c2>;
+
+		port@0 {
+			reg = <0>;
+
+			hdmi_mux_0: endpoint {
+				remote-endpoint = <&ipu1_di0_hdmi>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			hdmi_mux_1: endpoint {
+				remote-endpoint = <&ipu1_di1_hdmi>;
+			};
+		};
+	};

Documentation/devicetree/bindings/drm/msm/hdmi.txt

@@ -2,6 +2,8 @@ Qualcomm adreno/snapdragon hdmi output
 
 Required properties:
 - compatible: one of the following
+   * "qcom,hdmi-tx-8084"
+   * "qcom,hdmi-tx-8074"
    * "qcom,hdmi-tx-8660"
    * "qcom,hdmi-tx-8960"
 - reg: Physical base address and length of the controller's registers

Documentation/devicetree/bindings/gpu/st,stih4xx.txt

@@ -83,6 +83,22 @@ sti-hda:
   - clock-names: names of the clocks listed in clocks property in the same
     order.
 
+sti-dvo:
+  Required properties:
+  must be a child of sti-tvout
+  - compatible: "st,stih<chip>-dvo"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - reg-names: names of the mapped memory regions listed in regs property in
+    the same order.
+  - clocks: from common clock binding: handle hardware IP needed clocks, the
+    number of clocks may depend of the SoC type.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: names of the clocks listed in clocks property in the same
+    order.
+  - pinctrl-0: pin control handle
+  - pinctrl-name: names of the pin control to use
+  - sti,panel: phandle of the panel connected to the DVO output
+
 sti-hqvdp:
   must be a child of sti-display-subsystem
   Required properties:
@@ -198,6 +214,19 @@ Example:
 				clock-names	= "pix", "hddac";
 				clocks          = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>;
 			};
+
+			sti-dvo@8d00400 {
+				compatible	= "st,stih407-dvo";
+				reg		= <0x8d00400 0x200>;
+				reg-names	= "dvo-reg";
+				clock-names	= "dvo_pix", "dvo",
+						  "main_parent", "aux_parent";
+				clocks		= <&clk_s_d2_flexgen CLK_PIX_DVO>, <&clk_s_d2_flexgen CLK_DVO>,
+						  <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
+				pinctrl-names	= "default";
+				pinctrl-0	= <&pinctrl_dvo>;
+				sti,panel	= <&panel_dvo>;
+			};
 		};
 
 		sti-hqvdp@9c000000 {

Documentation/devicetree/bindings/panel/avic,tm070ddh03.txt

@@ -0,0 +1,7 @@
+Shanghai AVIC Optoelectronics 7" 1024x600 color TFT-LCD panel
+
+Required properties:
+- compatible: should be "avic,tm070ddh03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/panel/giantplus,gpg482739qs5.txt

@@ -0,0 +1,7 @@
+GiantPlus GPG48273QS5 4.3" (480x272) WQVGA TFT LCD panel
+
+Required properties:
+- compatible: should be "giantplus,gpg48273qs5"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -25,6 +25,7 @@ asahi-kasei	Asahi Kasei Corp.
 atmel	Atmel Corporation
 auo	AU Optronics Corporation
 avago	Avago Technologies
+avic	Shanghai AVIC Optoelectronics Co., Ltd.
 bosch	Bosch Sensortec GmbH
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.
@@ -68,6 +69,7 @@ fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 geniatech	Geniatech, Inc.
+giantplus	Giantplus Technology Co., Ltd.
 globalscale	Globalscale Technologies, Inc.
 gmt	Global Mixed-mode Technology, Inc.
 google	Google, Inc.
@@ -126,6 +128,7 @@ onnn	ON Semiconductor Corp.
 opencores	OpenCores.org
 ovti	OmniVision Technologies
 panasonic	Panasonic Corporation
+parade	Parade Technologies Inc.
 pericom	Pericom Technology Inc.
 phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd

Documentation/devicetree/bindings/video/bridge/ps8622.txt

@@ -0,0 +1,31 @@
+ps8622-bridge bindings
+
+Required properties:
+	- compatible: "parade,ps8622" or "parade,ps8625"
+	- reg: first i2c address of the bridge
+	- sleep-gpios: OF device-tree gpio specification for PD_ pin.
+	- reset-gpios: OF device-tree gpio specification for RST_ pin.
+
+Optional properties:
+	- lane-count: number of DP lanes to use
+	- use-external-pwm: backlight will be controlled by an external PWM
+	- video interfaces: Device node can contain video interface port
+			    nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	lvds-bridge@48 {
+		compatible = "parade,ps8622";
+		reg = <0x48>;
+		sleep-gpios = <&gpc3 6 1 0 0>;
+		reset-gpios = <&gpc3 1 1 0 0>;
+		lane-count = <1>;
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/video/bridge/ptn3460.txt

@@ -3,8 +3,8 @@ ptn3460 bridge bindings
 Required properties:
 	- compatible: "nxp,ptn3460"
 	- reg: i2c address of the bridge
-	- powerdown-gpio: OF device-tree gpio specification
-	- reset-gpio: OF device-tree gpio specification
+	- powerdown-gpio: OF device-tree gpio specification  for PD_N pin.
+	- reset-gpio: OF device-tree gpio specification for RST_N pin.
 	- edid-emulation: The EDID emulation entry to use
 		+-------+------------+------------------+
 		| Value | Resolution | Description      |
@@ -17,6 +17,11 @@ Required properties:
 		|   6   |  1600x900  | ChiMei M215HGE   |
 		+-------+------------+------------------+
 
+	- video interfaces: Device node can contain video interface port
+			    nodes for panel according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
 Example:
 	lvds-bridge@20 {
 		compatible = "nxp,ptn3460";
@@ -24,4 +29,11 @@ Example:
 		powerdown-gpio = <&gpy2 5 1 0 0>;
 		reset-gpio = <&gpx1 5 1 0 0>;
 		edid-emulation = <5>;
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
 	};

Documentation/devicetree/bindings/video/dw_hdmi-rockchip.txt

@@ -0,0 +1,46 @@
+Rockchip specific extensions to the Synopsys Designware HDMI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-dw-hdmi";
+- reg: Physical base address and length of the controller's registers.
+- clocks: phandle to hdmi iahb and isfr clocks.
+- clock-names: should be "iahb" "isfr"
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- interrupts: HDMI interrupt number
+- ports: contain a port node with endpoint definitions as defined in
+  Documentation/devicetree/bindings/media/video-interfaces.txt. For
+  vopb,set the reg = <0> and set the reg = <1> for vopl.
+- reg-io-width: the width of the reg:1,4, the value should be 4 on
+  rk3288 platform
+
+Optional properties
+- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec"
+
+Example:
+hdmi: hdmi@ff980000 {
+	compatible = "rockchip,rk3288-dw-hdmi";
+	reg = <0xff980000 0x20000>;
+	reg-io-width = <4>;
+	ddc-i2c-bus = <&i2c5>;
+	rockchip,grf = <&grf>;
+	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+	clock-names = "iahb", "isfr";
+	status = "disabled";
+	ports {
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vopb: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vopb_out_hdmi>;
+			};
+			hdmi_in_vopl: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&vopl_out_hdmi>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/video/exynos7-decon.txt

@@ -0,0 +1,68 @@
+Device-Tree bindings for Samsung Exynos7 SoC display controller (DECON)
+
+DECON (Display and Enhancement Controller) is the Display Controller for the
+Exynos7 series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be "samsung,exynos7-decon";
+
+- reg: physical base address and length of the DECON registers set.
+
+- interrupt-parent: should be the phandle of the decon controller's
+		parent interrupt controller.
+
+- interrupts: should contain a list of all DECON IP block interrupts in the
+		 order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+		 format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+         clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+               property. Must contain "pclk_decon0", "aclk_decon0",
+	       "decon0_eclk", "decon0_vclk".
+- i80-if-timings: timing configuration for lcd i80 interface support.
+
+Optional Properties:
+- samsung,power-domain: a phandle to DECON power domain node.
+- display-timings: timing settings for DECON, as described in document [1].
+		Can be used in case timings cannot be provided otherwise
+		or to override timings provided by the panel.
+
+[1]: Documentation/devicetree/bindings/video/display-timing.txt
+
+Example:
+
+SoC specific DT entry:
+
+	decon@13930000 {
+		compatible = "samsung,exynos7-decon";
+		interrupt-parent = <&combiner>;
+		reg = <0x13930000 0x1000>;
+		interrupt-names = "lcd_sys", "vsync", "fifo";
+		interrupts = <0 188 0>, <0 189 0>, <0 190 0>;
+		clocks = <&clock_disp PCLK_DECON_INT>,
+			 <&clock_disp ACLK_DECON_INT>,
+			 <&clock_disp SCLK_DECON_INT_ECLK>,
+			 <&clock_disp SCLK_DECON_INT_EXTCLKPLL>;
+		clock-names = "pclk_decon0", "aclk_decon0", "decon0_eclk",
+				"decon0_vclk";
+		status = "disabled";
+	};
+
+Board specific DT entry:
+
+	decon@13930000 {
+		pinctrl-0 = <&lcd_clk &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};

Documentation/devicetree/bindings/video/exynos_dp.txt

@@ -66,6 +66,10 @@ Optional properties for dp-controller:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
 			detection
+	-video interfaces: Device node can contain video interface port
+			    nodes according to [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
 Example:
 
@@ -105,4 +109,12 @@ Board Specific portion:
 				vsync-len = <6>;
 			};
 		};
+
+		ports {
+			port@0 {
+				dp_out: endpoint {
+					remote-endpoint = <&bridge_in>;
+				};
+			};
+		};
 	};

Documentation/devicetree/bindings/video/exynos_mixer.txt

@@ -15,6 +15,7 @@ Required properties:
 	a) mixer: Gate of Mixer IP bus clock.
 	b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
                mixer mux.
+	c) hdmi: Gate of HDMI IP bus clock, needed together with sclk_hdmi.
 
 Example:
 

Documentation/devicetree/bindings/video/renesas,du.txt

@@ -26,6 +26,10 @@ Required Properties:
       per LVDS encoder. The functional clocks must be named "du.x" with "x"
       being the channel numerical index. The LVDS clocks must be named
       "lvds.x" with "x" being the LVDS encoder numerical index.
+    - In addition to the functional and encoder clocks, all DU versions also
+      support externally supplied pixel clocks. Those clocks are optional.
+      When supplied they must be named "dclkin.x" with "x" being the input
+      clock numerical index.
 
 Required nodes:
 

MAINTAINERS

@@ -630,6 +630,8 @@ L:      dri-devel@lists.freedesktop.org
 T:      git git://people.freedesktop.org/~gabbayo/linux.git
 S:      Supported
 F:      drivers/gpu/drm/amd/amdkfd/
+F:	drivers/gpu/drm/amd/include/cik_structs.h
+F:	drivers/gpu/drm/amd/include/kgd_kfd_interface.h
 F:      drivers/gpu/drm/radeon/radeon_kfd.c
 F:      drivers/gpu/drm/radeon/radeon_kfd.h
 F:      include/uapi/linux/kfd_ioctl.h

drivers/char/agp/agp.h

@@ -219,7 +219,10 @@ struct agp_bridge_data *agp_generic_find_bridge(struct pci_dev *pdev);
 /* generic functions for user-populated AGP memory types */
 struct agp_memory *agp_generic_alloc_user(size_t page_count, int type);
 void agp_alloc_page_array(size_t size, struct agp_memory *mem);
-void agp_free_page_array(struct agp_memory *mem);
+static inline void agp_free_page_array(struct agp_memory *mem)
+{
+	kvfree(mem->pages);
+}
 
 
 /* generic routines for agp>=3 */

drivers/char/agp/generic.c

@@ -98,17 +98,6 @@ void agp_alloc_page_array(size_t size, struct agp_memory *mem)
 }
 EXPORT_SYMBOL(agp_alloc_page_array);
 
-void agp_free_page_array(struct agp_memory *mem)
-{
-	if (is_vmalloc_addr(mem->pages)) {
-		vfree(mem->pages);
-	} else {
-		kfree(mem->pages);
-	}
-}
-EXPORT_SYMBOL(agp_free_page_array);
-
-
 static struct agp_memory *agp_create_user_memory(unsigned long num_agp_pages)
 {
 	struct agp_memory *new;

drivers/char/agp/intel-gtt.c

@@ -225,7 +225,7 @@ static int i810_insert_dcache_entries(struct agp_memory *mem, off_t pg_start,
 		intel_private.driver->write_entry(addr,
 						  i, type);
 	}
-	readl(intel_private.gtt+i-1);
+	wmb();
 
 	return 0;
 }
@@ -329,7 +329,7 @@ static void i810_write_entry(dma_addr_t addr, unsigned int entry,
 		break;
 	}
 
-	writel(addr | pte_flags, intel_private.gtt + entry);
+	writel_relaxed(addr | pte_flags, intel_private.gtt + entry);
 }
 
 static const struct aper_size_info_fixed intel_fake_agp_sizes[] = {
@@ -735,7 +735,7 @@ static void i830_write_entry(dma_addr_t addr, unsigned int entry,
 	if (flags ==  AGP_USER_CACHED_MEMORY)
 		pte_flags |= I830_PTE_SYSTEM_CACHED;
 
-	writel(addr | pte_flags, intel_private.gtt + entry);
+	writel_relaxed(addr | pte_flags, intel_private.gtt + entry);
 }
 
 bool intel_enable_gtt(void)
@@ -858,7 +858,7 @@ void intel_gtt_insert_sg_entries(struct sg_table *st,
 			j++;
 		}
 	}
-	readl(intel_private.gtt+j-1);
+	wmb();
 }
 EXPORT_SYMBOL(intel_gtt_insert_sg_entries);
 
@@ -875,7 +875,7 @@ static void intel_gtt_insert_pages(unsigned int first_entry,
 		intel_private.driver->write_entry(addr,
 						  j, flags);
 	}
-	readl(intel_private.gtt+j-1);
+	wmb();
 }
 
 static int intel_fake_agp_insert_entries(struct agp_memory *mem,
@@ -938,7 +938,7 @@ void intel_gtt_clear_range(unsigned int first_entry, unsigned int num_entries)
 		intel_private.driver->write_entry(intel_private.scratch_page_dma,
 						  i, 0);
 	}
-	readl(intel_private.gtt+i-1);
+	wmb();
 }
 EXPORT_SYMBOL(intel_gtt_clear_range);
 
@@ -1106,7 +1106,7 @@ static void i965_write_entry(dma_addr_t addr,
 
 	/* Shift high bits down */
 	addr |= (addr >> 28) & 0xf0;
-	writel(addr | pte_flags, intel_private.gtt + entry);
+	writel_relaxed(addr | pte_flags, intel_private.gtt + entry);
 }
 
 static int i9xx_setup(void)

drivers/gpu/Makefile

@@ -1,3 +1,6 @@
-obj-y			+= drm/ vga/
+# drm/tegra depends on host1x, so if both drivers are built-in care must be
+# taken to initialize them in the correct order. Link order is the only way
+# to ensure this currently.
 obj-$(CONFIG_TEGRA_HOST1X)	+= host1x/
+obj-y			+= drm/ vga/
 obj-$(CONFIG_IMX_IPUV3_CORE)	+= ipu-v3/