[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver code

This patch is the SGI hotplug driver and additional changes required for
the driver.  These modifications include changes to the SN io_init.c code
for memory management, the inclusion of new SAL calls to enable and disable
PCI slots, and a hotplug-style driver.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

arch/ia64/sn/kernel/io_init.c

@@ -23,6 +23,14 @@
 
 nasid_t master_nasid = INVALID_NASID;	/* Partition Master */
 
+static struct list_head sn_sysdata_list;
+
+/* sysdata list struct */
+struct sysdata_el {
+	struct list_head entry;
+	void *sysdata;
+};
+
 struct slab_info {
 	struct hubdev_info hubdev;
 };
@@ -136,23 +144,6 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
 	return ret_stuff.v0;
 }
 
-/*
- * sn_alloc_pci_sysdata() - This routine allocates a pci controller
- *	which is expected as the pci_dev and pci_bus sysdata by the Linux
- *	PCI infrastructure.
- */
-static inline struct pci_controller *sn_alloc_pci_sysdata(void)
-{
-	struct pci_controller *pci_sysdata;
-
-	pci_sysdata = kmalloc(sizeof(*pci_sysdata), GFP_KERNEL);
-	if (!pci_sysdata)
-		BUG();
-
-	memset(pci_sysdata, 0, sizeof(*pci_sysdata));
-	return pci_sysdata;
-}
-
 /*
  * sn_fixup_ionodes() - This routine initializes the HUB data strcuture for 
  *	each node in the system.
@@ -220,6 +211,15 @@ static void sn_fixup_ionodes(void)
 
 }
 
+void sn_pci_unfixup_slot(struct pci_dev *dev)
+{
+	struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev;
+
+	sn_irq_unfixup(dev);
+	pci_dev_put(host_pci_dev);
+	pci_dev_put(dev);
+}
+
 /*
  * sn_pci_fixup_slot() - This routine sets up a slot's resources
  * consistent with the Linux PCI abstraction layer.  Resources acquired
@@ -238,6 +238,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  	unsigned long size;
  	unsigned int bus_no, devfn;
 
+	pci_dev_get(dev); /* for the sysdata pointer */
 	dev->sysdata = kmalloc(sizeof(struct pcidev_info), GFP_KERNEL);
 	if (SN_PCIDEV_INFO(dev) <= 0)
 		BUG();		/* Cannot afford to run out of memory */
@@ -276,7 +277,8 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
 			dev->resource[idx].parent = &iomem_resource;
 	}
 
- 	/* Using the PROMs values for the PCI host bus, get the Linux
+	/*
+	 * Using the PROMs values for the PCI host bus, get the Linux
  	 * PCI host_pci_dev struct and set up host bus linkages
  	 */
 
@@ -313,55 +315,57 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
  * sn_pci_controller_fixup() - This routine sets up a bus's resources
  * consistent with the Linux PCI abstraction layer.
  */
-static void sn_pci_controller_fixup(int segment, int busnum)
+void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 {
 	int status = 0;
 	int nasid, cnode;
-	struct pci_bus *bus;
 	struct pci_controller *controller;
 	struct pcibus_bussoft *prom_bussoft_ptr;
 	struct hubdev_info *hubdev_info;
 	void *provider_soft;
 	struct sn_pcibus_provider *provider;
 
-	status =
+ 	status = sal_get_pcibus_info((u64) segment, (u64) busnum,
-	    sal_get_pcibus_info((u64) segment, (u64) busnum,
  				     (u64) ia64_tpa(&prom_bussoft_ptr));
-	if (status > 0) {
+ 	if (status > 0)
-		return;		/* bus # does not exist */
+		return;		/*bus # does not exist */
-	}
-
 	prom_bussoft_ptr = __va(prom_bussoft_ptr);
-	controller = sn_alloc_pci_sysdata();
-	/* controller non-zero is BUG'd in sn_alloc_pci_sysdata */
 
-	bus = pci_scan_bus(busnum, &pci_root_ops, controller);
+ 	controller = kcalloc(1,sizeof(struct pci_controller), GFP_KERNEL);
+ 	if (!controller)
+ 		BUG();
+
 	if (bus == NULL) {
+ 		bus = pci_scan_bus(busnum, &pci_root_ops, controller);
+ 		if (bus == NULL)
  			return;	/* error, or bus already scanned */
+ 		bus->sysdata = NULL;
 	}
 
+	if (bus->sysdata)
+		goto error_return; /* sysdata already alloc'd */
+
 	/*
 	 * Per-provider fixup.  Copies the contents from prom to local
 	 * area and links SN_PCIBUS_BUSSOFT().
 	 */
 
-	if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) {
+	if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
 		return;		/* unsupported asic type */
-	}
+
+	if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
+		goto error_return; /* no further fixup necessary */
 
 	provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
-	if (provider == NULL) {
+	if (provider == NULL)
 		return;		/* no provider registerd for this asic */
-	}
 
 	provider_soft = NULL;
-	if (provider->bus_fixup) {
+	if (provider->bus_fixup)
 		provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr);
-	}
 
-	if (provider_soft == NULL) {
+	if (provider_soft == NULL)
 		return;		/* fixup failed or not applicable */
-	}
 
 	/*
 	 * Generic bus fixup goes here.  Don't reference prom_bussoft_ptr
@@ -370,12 +374,47 @@ static void sn_pci_controller_fixup(int segment, int busnum)
 
 	bus->sysdata = controller;
 	PCI_CONTROLLER(bus)->platform_data = provider_soft;
-
 	nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
 	cnode = nasid_to_cnodeid(nasid);
 	hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
 	SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
 	    &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
+
+	return;
+
+error_return:
+
+	kfree(controller);
+	return;
+}
+
+void sn_bus_store_sysdata(struct pci_dev *dev)
+{
+	struct sysdata_el *element;
+
+	element = kcalloc(1, sizeof(struct sysdata_el), GFP_KERNEL);
+	if (!element) {
+		dev_dbg(dev, "%s: out of memory!\n", __FUNCTION__);
+		return;
+	}
+	element->sysdata = dev->sysdata;
+	list_add(&element->entry, &sn_sysdata_list);
+}
+
+void sn_bus_free_sysdata(void)
+{
+	struct sysdata_el *element;
+	struct list_head *list;
+
+sn_sysdata_free_start:
+	list_for_each(list, &sn_sysdata_list) {
+		element = list_entry(list, struct sysdata_el, entry);
+		list_del(&element->entry);
+		kfree(element->sysdata);
+		kfree(element);
+		goto sn_sysdata_free_start;
+	}
+	return;
 }
 
 /*
@@ -413,15 +452,16 @@ static int __init sn_pci_init(void)
 	ia64_max_iommu_merge_mask = ~PAGE_MASK;
 	sn_fixup_ionodes();
 	sn_irq_lh_init();
+	INIT_LIST_HEAD(&sn_sysdata_list);
 	sn_init_cpei_timer();
 
 #ifdef CONFIG_PROC_FS
 	register_sn_procfs();
 #endif
 
-	for (i = 0; i < PCI_BUSES_TO_SCAN; i++) {
+	/* busses are not known yet ... */
-		sn_pci_controller_fixup(0, i);
+	for (i = 0; i < PCI_BUSES_TO_SCAN; i++)
-	}
+		sn_pci_controller_fixup(0, i, NULL);
 
 	/*
 	 * Generic Linux PCI Layer has created the pci_bus and pci_dev 
@@ -430,9 +470,8 @@ static int __init sn_pci_init(void)
 	 */
 
 	while ((pci_dev =
-		pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL) {
+		pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_dev)) != NULL)
 		sn_pci_fixup_slot(pci_dev);
-	}
 
 	sn_ioif_inited = 1;	/* sn I/O infrastructure now initialized */
 
@@ -474,3 +513,8 @@ cnodeid_get_geoid(cnodeid_t cnode)
 }
 
 subsys_initcall(sn_pci_init);
+EXPORT_SYMBOL(sn_pci_fixup_slot);
+EXPORT_SYMBOL(sn_pci_unfixup_slot);
+EXPORT_SYMBOL(sn_pci_controller_fixup);
+EXPORT_SYMBOL(sn_bus_store_sysdata);
+EXPORT_SYMBOL(sn_bus_free_sysdata);

arch/ia64/sn/kernel/irq.c

@@ -284,7 +284,6 @@ void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
 	int cpu = nasid_slice_to_cpuid(nasid, slice);
 
 	pci_dev_get(pci_dev);
-
 	sn_irq_info->irq_cpuid = cpu;
 	sn_irq_info->irq_pciioinfo = SN_PCIDEV_INFO(pci_dev);
 
@@ -305,15 +304,16 @@ void sn_irq_unfixup(struct pci_dev *pci_dev)
 		return;
 
 	sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
-	if (!sn_irq_info || !sn_irq_info->irq_irq)
+	if (!sn_irq_info || !sn_irq_info->irq_irq) {
+		kfree(sn_irq_info);
 		return;
+	}
 
 	unregister_intr_pda(sn_irq_info);
 	spin_lock(&sn_irq_info_lock);
 	list_del_rcu(&sn_irq_info->list);
 	spin_unlock(&sn_irq_info_lock);
 	call_rcu(&sn_irq_info->rcu, sn_irq_info_free);
-
 	pci_dev_put(pci_dev);
 }
 

arch/ia64/sn/pci/pcibr/pcibr_provider.c

@@ -18,6 +18,40 @@
 #include "xtalk/xwidgetdev.h"
 #include "xtalk/hubdev.h"
 
+int
+sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
+{
+	struct ia64_sal_retval ret_stuff;
+	uint64_t busnum;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	busnum = soft->pbi_buscommon.bs_persist_busnum;
+	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, (u64) busnum,
+			(u64) device, (u64) resp, 0, 0, 0, 0);
+
+	return (int)ret_stuff.v0;
+}
+
+int
+sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action,
+		       void *resp)
+{
+	struct ia64_sal_retval ret_stuff;
+	uint64_t busnum;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+
+	busnum = soft->pbi_buscommon.bs_persist_busnum;
+	SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_DISABLE,
+			(u64) busnum, (u64) device, (u64) action,
+			(u64) resp, 0, 0, 0);
+
+	return (int)ret_stuff.v0;
+}
+
 static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
 {
 	struct ia64_sal_retval ret_stuff;
@@ -187,3 +221,6 @@ pcibr_init_provider(void)
 
 	return 0;
 }
+
+EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable);
+EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable);

drivers/pci/hotplug/Kconfig

@@ -187,9 +187,10 @@ config HOTPLUG_PCI_RPA_DLPAR
 
 config HOTPLUG_PCI_SGI
 	tristate "SGI PCI Hotplug Support"
-	depends on HOTPLUG_PCI && IA64_SGI_SN2
+	depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC)
 	help
-	  Say Y here if you have an SGI IA64 Altix system.
+	  Say Y here if you want to use the SGI Altix Hotplug
+	  Driver for PCI devices.
 
 	  When in doubt, say N.
 

drivers/pci/hotplug/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_HOTPLUG_PCI_PCIE)		+= pciehp.o
 obj-$(CONFIG_HOTPLUG_PCI_SHPC)		+= shpchp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA)		+= rpaphp.o
 obj-$(CONFIG_HOTPLUG_PCI_RPA_DLPAR)	+= rpadlpar_io.o
+obj-$(CONFIG_HOTPLUG_PCI_SGI)		+= sgi_hotplug.o
 
 pci_hotplug-objs	:=	pci_hotplug_core.o
 

include/asm-ia64/sn/pcibr_provider.h

@@ -151,4 +151,8 @@ extern void 		pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
 extern int 		pcibr_ate_alloc(struct pcibus_info *, int);
 extern void 		pcibr_ate_free(struct pcibus_info *, int);
 extern void 		ate_write(struct pcibus_info *, int, int, uint64_t);
+extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
+				 void *resp);
+extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
+				  int action, void *resp);
 #endif

include/asm-ia64/sn/pcidev.h

@@ -23,6 +23,8 @@
 #define SN_PCIBUS_BUSSOFT(pci_bus) \
         ((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
 
+#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
+	(struct pcibus_info *)((struct pcibus_bussoft *)(PCI_CONTROLLER((pci_bus))->platform_data))
 /*
  * Given a struct pci_dev, return the sn pcibus_bussoft struct.  Note
  * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
@@ -56,6 +58,10 @@ struct pcidev_info {
 extern void sn_irq_fixup(struct pci_dev *pci_dev,
 			 struct sn_irq_info *sn_irq_info);
 extern void sn_irq_unfixup(struct pci_dev *pci_dev);
+extern void sn_pci_controller_fixup(int segment, int busnum,
+ 				    struct pci_bus *bus);
+extern void sn_bus_store_sysdata(struct pci_dev *dev);
+extern void sn_bus_free_sysdata(void);
 extern void sn_pci_fixup_slot(struct pci_dev *dev);
 extern void sn_pci_unfixup_slot(struct pci_dev *dev);
 extern void sn_irq_lh_init(void);