Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem

drivers/bluetooth/ath3k.c

@@ -90,6 +90,7 @@ static struct usb_device_id ath3k_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393) },
 	{ USB_DEVICE(0x0489, 0xe04e) },
 	{ USB_DEVICE(0x0489, 0xe056) },
+	{ USB_DEVICE(0x0489, 0xe04d) },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE02C) },
@@ -126,6 +127,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU22 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },

drivers/bluetooth/btusb.c

@@ -148,6 +148,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -926,6 +927,22 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static int btusb_setup_bcm92035(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 val = 0x00;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
+	else
+		kfree_skb(skb);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
@@ -1022,11 +1039,14 @@ static int btusb_probe(struct usb_interface *intf,
 
 	SET_HCIDEV_DEV(hdev, &intf->dev);
 
-	hdev->open     = btusb_open;
-	hdev->close    = btusb_close;
-	hdev->flush    = btusb_flush;
-	hdev->send     = btusb_send_frame;
-	hdev->notify   = btusb_notify;
+	hdev->open   = btusb_open;
+	hdev->close  = btusb_close;
+	hdev->flush  = btusb_flush;
+	hdev->send   = btusb_send_frame;
+	hdev->notify = btusb_notify;
+
+	if (id->driver_info & BTUSB_BCM92035)
+		hdev->setup = btusb_setup_bcm92035;
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1065,17 +1085,6 @@ static int btusb_probe(struct usb_interface *intf,
 		data->isoc = NULL;
 	}
 
-	if (id->driver_info & BTUSB_BCM92035) {
-		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
-		struct sk_buff *skb;
-
-		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
-		if (skb) {
-			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
-			skb_queue_tail(&hdev->driver_init, skb);
-		}
-	}
-
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
 							data->isoc, data);

drivers/bluetooth/hci_h4.c

@@ -153,6 +153,9 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
 {
 	int ret;
 
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
 	ret = hci_recv_stream_fragment(hu->hdev, data, count);
 	if (ret < 0) {
 		BT_ERR("Frame Reassembly Failed");

drivers/bluetooth/hci_ldisc.c

@@ -260,12 +260,12 @@ static int hci_uart_send_frame(struct sk_buff *skb)
 
 /* ------ LDISC part ------ */
 /* hci_uart_tty_open
- * 
+ *
  *     Called when line discipline changed to HCI_UART.
  *
  * Arguments:
  *     tty    pointer to tty info structure
- * Return Value:    
+ * Return Value:
  *     0 if success, otherwise error code
  */
 static int hci_uart_tty_open(struct tty_struct *tty)
@@ -365,15 +365,15 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
 }
 
 /* hci_uart_tty_receive()
- * 
+ *
  *     Called by tty low level driver when receive data is
  *     available.
- *     
+ *
  * Arguments:  tty          pointer to tty isntance data
  *             data         pointer to received data
  *             flags        pointer to flags for data
  *             count        count of received data in bytes
- *     
+ *
  * Return Value:    None
  */
 static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
@@ -388,7 +388,10 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *f
 
 	spin_lock(&hu->rx_lock);
 	hu->proto->recv(hu, (void *) data, count);
-	hu->hdev->stat.byte_rx += count;
+
+	if (hu->hdev)
+		hu->hdev->stat.byte_rx += count;
+
 	spin_unlock(&hu->rx_lock);
 
 	tty_unthrottle(tty);

drivers/net/wireless/adm8211.c

@@ -1293,7 +1293,8 @@ static int adm8211_config(struct ieee80211_hw *dev, u32 changed)
 {
 	struct adm8211_priv *priv = dev->priv;
 	struct ieee80211_conf *conf = &dev->conf;
-	int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+	int channel =
+		ieee80211_frequency_to_channel(conf->chandef.chan->center_freq);
 
 	if (channel != priv->channel) {
 		priv->channel = channel;

drivers/net/wireless/at76c50x-usb.c

@@ -1943,12 +1943,12 @@ static int at76_config(struct ieee80211_hw *hw, u32 changed)
 	struct at76_priv *priv = hw->priv;
 
 	at76_dbg(DBG_MAC80211, "%s(): channel %d",
-		 __func__, hw->conf.channel->hw_value);
+		 __func__, hw->conf.chandef.chan->hw_value);
 	at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");
 
 	mutex_lock(&priv->mtx);
 
-	priv->channel = hw->conf.channel->hw_value;
+	priv->channel = hw->conf.chandef.chan->hw_value;
 
 	if (is_valid_ether_addr(priv->bssid))
 		at76_join(priv);

drivers/net/wireless/ath/ar5523/ar5523.c

@@ -457,14 +457,14 @@ static int ar5523_set_chan(struct ar5523 *ar)
 	memset(&reset, 0, sizeof(reset));
 	reset.flags |= cpu_to_be32(UATH_CHAN_2GHZ);
 	reset.flags |= cpu_to_be32(UATH_CHAN_OFDM);
-	reset.freq = cpu_to_be32(conf->channel->center_freq);
+	reset.freq = cpu_to_be32(conf->chandef.chan->center_freq);
 	reset.maxrdpower = cpu_to_be32(50);	/* XXX */
 	reset.channelchange = cpu_to_be32(1);
 	reset.keeprccontent = cpu_to_be32(0);
 
 	ar5523_dbg(ar, "set chan flags 0x%x freq %d\n",
 		   be32_to_cpu(reset.flags),
-		   conf->channel->center_freq);
+		   conf->chandef.chan->center_freq);
 	return ar5523_cmd_write(ar, WDCMSG_RESET, &reset, sizeof(reset), 0);
 }
 
@@ -594,7 +594,7 @@ static void ar5523_data_rx_cb(struct urb *urb)
 	rx_status = IEEE80211_SKB_RXCB(data->skb);
 	memset(rx_status, 0, sizeof(*rx_status));
 	rx_status->freq = be32_to_cpu(desc->channel);
-	rx_status->band = hw->conf.channel->band;
+	rx_status->band = hw->conf.chandef.chan->band;
 	rx_status->signal = -95 + be32_to_cpu(desc->rssi);
 
 	ieee80211_rx_irqsafe(hw, data->skb);
@@ -1153,13 +1153,13 @@ static int ar5523_get_wlan_mode(struct ar5523 *ar,
 	struct ieee80211_sta *sta;
 	u32 sta_rate_set;
 
-	band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+	band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
 	sta = ieee80211_find_sta(ar->vif, bss_conf->bssid);
 	if (!sta) {
 		ar5523_info(ar, "STA not found!\n");
 		return WLAN_MODE_11b;
 	}
-	sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+	sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band];
 
 	for (bit = 0; bit < band->n_bitrates; bit++) {
 		if (sta_rate_set & 1) {
@@ -1197,11 +1197,11 @@ static void ar5523_create_rateset(struct ar5523 *ar,
 		ar5523_info(ar, "STA not found. Cannot set rates\n");
 		sta_rate_set = bss_conf->basic_rates;
 	} else
-		sta_rate_set = sta->supp_rates[ar->hw->conf.channel->band];
+		sta_rate_set = sta->supp_rates[ar->hw->conf.chandef.chan->band];
 
 	ar5523_dbg(ar, "sta rate_set = %08x\n", sta_rate_set);
 
-	band = ar->hw->wiphy->bands[ar->hw->conf.channel->band];
+	band = ar->hw->wiphy->bands[ar->hw->conf.chandef.chan->band];
 	for (bit = 0; bit < band->n_bitrates; bit++) {
 		BUG_ON(i >= AR5523_MAX_NRATES);
 		ar5523_dbg(ar, "Considering rate %d : %d\n",

drivers/net/wireless/ath/ath5k/Makefile

@@ -10,6 +10,7 @@ ath5k-y				+= phy.o
 ath5k-y				+= reset.o
 ath5k-y				+= attach.o
 ath5k-y				+= base.o
+CFLAGS_base.o			+= -I$(src)
 ath5k-y				+= led.o
 ath5k-y				+= rfkill.o
 ath5k-y				+= ani.o

drivers/net/wireless/ath/ath5k/base.c

@@ -2639,7 +2639,7 @@ int ath5k_start(struct ieee80211_hw *hw)
 	 * be followed by initialization of the appropriate bits
 	 * and then setup of the interrupt mask.
 	 */
-	ah->curchan = ah->hw->conf.channel;
+	ah->curchan = ah->hw->conf.chandef.chan;
 	ah->imask = AR5K_INT_RXOK
 		| AR5K_INT_RXERR
 		| AR5K_INT_RXEOL

drivers/net/wireless/ath/ath5k/mac80211-ops.c

@@ -202,7 +202,7 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&ah->lock);
 
 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
-		ret = ath5k_chan_set(ah, conf->channel);
+		ret = ath5k_chan_set(ah, conf->chandef.chan);
 		if (ret < 0)
 			goto unlock;
 	}
@@ -678,7 +678,7 @@ ath5k_get_survey(struct ieee80211_hw *hw, int idx, struct survey_info *survey)
 
 	memcpy(survey, &ah->survey, sizeof(*survey));
 
-	survey->channel = conf->channel;
+	survey->channel = conf->chandef.chan;
 	survey->noise = ah->ah_noise_floor;
 	survey->filled = SURVEY_INFO_NOISE_DBM |
 			SURVEY_INFO_CHANNEL_TIME |

drivers/net/wireless/ath/ath5k/trace.h

@@ -97,7 +97,7 @@ TRACE_EVENT(ath5k_tx_complete,
 #if defined(CONFIG_ATH5K_TRACER) && !defined(__CHECKER__)
 
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH ../../drivers/net/wireless/ath/ath5k
+#define TRACE_INCLUDE_PATH .
 #undef TRACE_INCLUDE_FILE
 #define TRACE_INCLUDE_FILE trace
 

drivers/net/wireless/ath/ath9k/ar5008_phy.c

@@ -18,6 +18,7 @@
 #include "hw-ops.h"
 #include "../regd.h"
 #include "ar9002_phy.h"
+#include "ar5008_initvals.h"
 
 /* All code below is for AR5008, AR9001, AR9002 */
 
@@ -43,23 +44,16 @@ static const int m2ThreshLowExt_off = 127;
 static const int m1ThreshExt_off = 127;
 static const int m2ThreshExt_off = 127;
 
+static const struct ar5416IniArray bank0 = STATIC_INI_ARRAY(ar5416Bank0);
+static const struct ar5416IniArray bank1 = STATIC_INI_ARRAY(ar5416Bank1);
+static const struct ar5416IniArray bank2 = STATIC_INI_ARRAY(ar5416Bank2);
+static const struct ar5416IniArray bank3 = STATIC_INI_ARRAY(ar5416Bank3);
+static const struct ar5416IniArray bank7 = STATIC_INI_ARRAY(ar5416Bank7);
 
-static void ar5008_rf_bank_setup(u32 *bank, struct ar5416IniArray *array,
-				 int col)
-{
-	int i;
-
-	for (i = 0; i < array->ia_rows; i++)
-		bank[i] = INI_RA(array, i, col);
-}
-
-
-#define REG_WRITE_RF_ARRAY(iniarray, regData, regWr) \
-	ar5008_write_rf_array(ah, iniarray, regData, &(regWr))
-
-static void ar5008_write_rf_array(struct ath_hw *ah, struct ar5416IniArray *array,
-				  u32 *data, unsigned int *writecnt)
+static void ar5008_write_bank6(struct ath_hw *ah, unsigned int *writecnt)
 {
+	struct ar5416IniArray *array = &ah->iniBank6;
+	u32 *data = ah->analogBank6Data;
 	int r;
 
 	ENABLE_REGWRITE_BUFFER(ah);
@@ -165,7 +159,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 	ar5008_hw_phy_modify_rx_buffer(ah->analogBank6Data, tmp_reg, 3, 181, 3);
 
 	/* write Bank 6 with new params */
-	REG_WRITE_RF_ARRAY(&ah->iniBank6, ah->analogBank6Data, reg_writes);
+	ar5008_write_bank6(ah, &reg_writes);
 }
 
 /**
@@ -469,31 +463,16 @@ static void ar5008_hw_spur_mitigate(struct ath_hw *ah,
  */
 static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah)
 {
-#define ATH_ALLOC_BANK(bank, size) do { \
-		bank = devm_kzalloc(ah->dev, sizeof(u32) * size, GFP_KERNEL); \
-		if (!bank) \
-			goto error; \
-	} while (0);
-
-	struct ath_common *common = ath9k_hw_common(ah);
+	int size = ah->iniBank6.ia_rows * sizeof(u32);
 
 	if (AR_SREV_9280_20_OR_LATER(ah))
 	    return 0;
 
-	ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank2Data, ah->iniBank2.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank3Data, ah->iniBank3.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank6Data, ah->iniBank6.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank6TPCData, ah->iniBank6TPC.ia_rows);
-	ATH_ALLOC_BANK(ah->analogBank7Data, ah->iniBank7.ia_rows);
-	ATH_ALLOC_BANK(ah->bank6Temp, ah->iniBank6.ia_rows);
+	ah->analogBank6Data = devm_kzalloc(ah->dev, size, GFP_KERNEL);
+	if (!ah->analogBank6Data)
+		return -ENOMEM;
 
 	return 0;
-#undef ATH_ALLOC_BANK
-error:
-	ath_err(common, "Cannot allocate RF banks\n");
-	return -ENOMEM;
 }
 
 
@@ -517,6 +496,7 @@ static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
 	u32 ob5GHz = 0, db5GHz = 0;
 	u32 ob2GHz = 0, db2GHz = 0;
 	int regWrites = 0;
+	int i;
 
 	/*
 	 * Software does not need to program bank data
@@ -529,25 +509,8 @@ static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
 	/* Setup rf parameters */
 	eepMinorRev = ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV);
 
-	/* Setup Bank 0 Write */
-	ar5008_rf_bank_setup(ah->analogBank0Data, &ah->iniBank0, 1);
-
-	/* Setup Bank 1 Write */
-	ar5008_rf_bank_setup(ah->analogBank1Data, &ah->iniBank1, 1);
-
-	/* Setup Bank 2 Write */
-	ar5008_rf_bank_setup(ah->analogBank2Data, &ah->iniBank2, 1);
-
-	/* Setup Bank 6 Write */
-	ar5008_rf_bank_setup(ah->analogBank3Data, &ah->iniBank3,
-		      modesIndex);
-	{
-		int i;
-		for (i = 0; i < ah->iniBank6TPC.ia_rows; i++) {
-			ah->analogBank6Data[i] =
-			    INI_RA(&ah->iniBank6TPC, i, modesIndex);
-		}
-	}
+	for (i = 0; i < ah->iniBank6.ia_rows; i++)
+		ah->analogBank6Data[i] = INI_RA(&ah->iniBank6, i, modesIndex);
 
 	/* Only the 5 or 2 GHz OB/DB need to be set for a mode */
 	if (eepMinorRev >= 2) {
@@ -568,22 +531,13 @@ static bool ar5008_hw_set_rf_regs(struct ath_hw *ah,
 		}
 	}
 
-	/* Setup Bank 7 Setup */
-	ar5008_rf_bank_setup(ah->analogBank7Data, &ah->iniBank7, 1);
-
 	/* Write Analog registers */
-	REG_WRITE_RF_ARRAY(&ah->iniBank0, ah->analogBank0Data,
-			   regWrites);
-	REG_WRITE_RF_ARRAY(&ah->iniBank1, ah->analogBank1Data,
-			   regWrites);
-	REG_WRITE_RF_ARRAY(&ah->iniBank2, ah->analogBank2Data,
-			   regWrites);
-	REG_WRITE_RF_ARRAY(&ah->iniBank3, ah->analogBank3Data,
-			   regWrites);
-	REG_WRITE_RF_ARRAY(&ah->iniBank6TPC, ah->analogBank6Data,
-			   regWrites);
-	REG_WRITE_RF_ARRAY(&ah->iniBank7, ah->analogBank7Data,
-			   regWrites);
+	REG_WRITE_ARRAY(&bank0, 1, regWrites);
+	REG_WRITE_ARRAY(&bank1, 1, regWrites);
+	REG_WRITE_ARRAY(&bank2, 1, regWrites);
+	REG_WRITE_ARRAY(&bank3, modesIndex, regWrites);
+	ar5008_write_bank6(ah, &regWrites);
+	REG_WRITE_ARRAY(&bank7, 1, regWrites);
 
 	return true;
 }

drivers/net/wireless/ath/ath9k/ar9002_hw.c

@@ -67,12 +67,10 @@ static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
 	} else if (AR_SREV_9100_OR_LATER(ah)) {
 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes_9100);
 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common_9100);
-		INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6_9100);
 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac_9100);
 	} else {
 		INIT_INI_ARRAY(&ah->iniModes, ar5416Modes);
 		INIT_INI_ARRAY(&ah->iniCommon, ar5416Common);
-		INIT_INI_ARRAY(&ah->iniBank6TPC, ar5416Bank6TPC);
 		INIT_INI_ARRAY(&ah->iniAddac, ar5416Addac);
 	}
 
@@ -80,20 +78,11 @@ static int ar9002_hw_init_mode_regs(struct ath_hw *ah)
 		/* Common for AR5416, AR913x, AR9160 */
 		INIT_INI_ARRAY(&ah->iniBB_RfGain, ar5416BB_RfGain);
 
-		INIT_INI_ARRAY(&ah->iniBank0, ar5416Bank0);
-		INIT_INI_ARRAY(&ah->iniBank1, ar5416Bank1);
-		INIT_INI_ARRAY(&ah->iniBank2, ar5416Bank2);
-		INIT_INI_ARRAY(&ah->iniBank3, ar5416Bank3);
-		INIT_INI_ARRAY(&ah->iniBank7, ar5416Bank7);
-
-		/* Common for AR5416, AR9160 */
-		if (!AR_SREV_9100(ah))
-			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6);
-
 		/* Common for AR913x, AR9160 */
 		if (!AR_SREV_5416(ah))
-			INIT_INI_ARRAY(&ah->iniBank6TPC,
-				      ar5416Bank6TPC_9100);
+			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC_9100);
+		else
+			INIT_INI_ARRAY(&ah->iniBank6, ar5416Bank6TPC);
 	}
 
 	/* iniAddac needs to be modified for these chips */

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -234,6 +234,7 @@ struct ath_buf {
 	dma_addr_t bf_daddr;		/* physical addr of desc */
 	dma_addr_t bf_buf_addr;	/* physical addr of data buffer, for DMA */
 	bool bf_stale;
+	struct ieee80211_tx_rate rates[4];
 	struct ath_buf_state bf_state;
 };
 
@@ -311,6 +312,7 @@ struct ath_rx_edma {
 struct ath_rx {
 	u8 defant;
 	u8 rxotherant;
+	bool discard_next;
 	u32 *rxlink;
 	u32 num_pkts;
 	unsigned int rxfilter;
@@ -657,11 +659,10 @@ enum sc_op_flags {
 struct ath_rate_table;
 
 struct ath9k_vif_iter_data {
-	const u8 *hw_macaddr; /* phy's hardware address, set
-			       * before starting iteration for
-			       * valid bssid mask.
-			       */
+	u8 hw_macaddr[ETH_ALEN]; /* address of the first vif */
 	u8 mask[ETH_ALEN]; /* bssid mask */
+	bool has_hw_macaddr;
+
 	int naps;      /* number of AP vifs */
 	int nmeshes;   /* number of mesh vifs */
 	int nstations; /* number of station vifs */

drivers/net/wireless/ath/ath9k/beacon.c

@@ -79,7 +79,7 @@ static void ath9k_beacon_setup(struct ath_softc *sc, struct ieee80211_vif *vif,
 	u8 chainmask = ah->txchainmask;
 	u8 rate = 0;
 
-	sband = &sc->sbands[common->hw->conf.channel->band];
+	sband = &sc->sbands[common->hw->conf.chandef.chan->band];
 	rate = sband->bitrates[rateidx].hw_value;
 	if (vif->bss_conf.use_short_preamble)
 		rate |= sband->bitrates[rateidx].hw_value_short;

drivers/net/wireless/ath/ath9k/calib.c

@@ -208,7 +208,7 @@ bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 		return true;
 
 	ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n",
-		currCal->calData->calType, conf->channel->center_freq);
+		currCal->calData->calType, conf->chandef.chan->center_freq);
 
 	ah->caldata->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;

drivers/net/wireless/ath/ath9k/calib.h

@@ -33,6 +33,12 @@ struct ar5416IniArray {
 	u32 ia_columns;
 };
 
+#define STATIC_INI_ARRAY(array) {			\
+		.ia_array = (u32 *)(array),		\
+		.ia_rows = ARRAY_SIZE(array),		\
+		.ia_columns = ARRAY_SIZE(array[0]),	\
+	}
+
 #define INIT_INI_ARRAY(iniarray, array) do {	\
 		(iniarray)->ia_array = (u32 *)(array);		\
 		(iniarray)->ia_rows = ARRAY_SIZE(array);	\

drivers/net/wireless/ath/ath9k/common.c

@@ -27,20 +27,6 @@ MODULE_AUTHOR("Atheros Communications");
 MODULE_DESCRIPTION("Shared library for Atheros wireless 802.11n LAN cards.");
 MODULE_LICENSE("Dual BSD/GPL");
 
-int ath9k_cmn_padpos(__le16 frame_control)
-{
-	int padpos = 24;
-	if (ieee80211_has_a4(frame_control)) {
-		padpos += ETH_ALEN;
-	}
-	if (ieee80211_is_data_qos(frame_control)) {
-		padpos += IEEE80211_QOS_CTL_LEN;
-	}
-
-	return padpos;
-}
-EXPORT_SYMBOL(ath9k_cmn_padpos);
-
 int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb)
 {
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
@@ -133,13 +119,14 @@ EXPORT_SYMBOL(ath9k_cmn_update_ichannel);
 struct ath9k_channel *ath9k_cmn_get_curchannel(struct ieee80211_hw *hw,
 					       struct ath_hw *ah)
 {
-	struct ieee80211_channel *curchan = hw->conf.channel;
+	struct ieee80211_channel *curchan = hw->conf.chandef.chan;
 	struct ath9k_channel *channel;
 	u8 chan_idx;
 
 	chan_idx = curchan->hw_value;
 	channel = &ah->channels[chan_idx];
-	ath9k_cmn_update_ichannel(channel, curchan, hw->conf.channel_type);
+	ath9k_cmn_update_ichannel(channel, curchan,
+				  cfg80211_get_chandef_type(&hw->conf.chandef));
 
 	return channel;
 }

drivers/net/wireless/ath/ath9k/common.h

@@ -42,7 +42,6 @@
 #define ATH_EP_RND(x, mul) 						\
 	(((x) + ((mul)/2)) / (mul))
 
-int ath9k_cmn_padpos(__le16 frame_control);
 int ath9k_cmn_get_hw_crypto_keytype(struct sk_buff *skb);
 void ath9k_cmn_update_ichannel(struct ath9k_channel *ichan,
 			       struct ieee80211_channel *chan,

drivers/net/wireless/ath/ath9k/dfs.c

@@ -55,12 +55,6 @@ ath9k_postprocess_radar_event(struct ath_softc *sc,
 	u8 rssi;
 	u16 dur;
 
-	ath_dbg(ath9k_hw_common(sc->sc_ah), DFS,
-		"pulse_bw_info=0x%x, pri,ext len/rssi=(%u/%u, %u/%u)\n",
-		ard->pulse_bw_info,
-		ard->pulse_length_pri, ard->rssi,
-		ard->pulse_length_ext, ard->ext_rssi);
-
 	/*
 	 * Only the last 2 bits of the BW info are relevant, they indicate
 	 * which channel the radar was detected in.