Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...

Documentation/arm/sunxi/README

@@ -63,10 +63,18 @@ SunXi family
         + User Manual
           http://dl.linux-sunxi.org/A33/A33%20user%20manual%20release%201.1.pdf
 
+      - Allwinner H2+ (sun8i)
+        + No document available now, but is known to be working properly with
+          H3 drivers and memory map.
+
       - Allwinner H3 (sun8i)
         + Datasheet
           http://dl.linux-sunxi.org/H3/Allwinner_H3_Datasheet_V1.0.pdf
 
+      - Allwinner V3s (sun8i)
+        + Datasheet
+          http://linux-sunxi.org/File:Allwinner_V3s_Datasheet_V1.0.pdf
+
     * Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
       - Allwinner A80
         + Datasheet

Documentation/devicetree/bindings/arm/cpus.txt

@@ -202,6 +202,7 @@ nodes to be present and contain the properties described below.
 			    "marvell,armada-380-smp"
 			    "marvell,armada-390-smp"
 			    "marvell,armada-xp-smp"
+			    "marvell,98dx3236-smp"
 			    "mediatek,mt6589-smp"
 			    "mediatek,mt81xx-tz-smp"
 			    "qcom,gcc-msm8660"

Documentation/devicetree/bindings/arm/marvell/98dx3236-resume-ctrl.txt

@@ -0,0 +1,16 @@
+Resume Control
+--------------
+Available on Marvell SOCs: 98DX3336 and 98DX4251
+
+Required properties:
+
+- compatible: must be "marvell,98dx3336-resume-ctrl"
+
+- reg: Should contain resume control registers location and length
+
+Example:
+
+resume@20980 {
+	compatible = "marvell,98dx3336-resume-ctrl";
+	reg = <0x20980 0x10>;
+};

Documentation/devicetree/bindings/arm/sunxi.txt

@@ -12,6 +12,7 @@ using one of the following compatible strings:
   allwinner,sun8i-a23
   allwinner,sun8i-a33
   allwinner,sun8i-a83t
+  allwinner,sun8i-h2-plus
   allwinner,sun8i-h3
   allwinner,sun9i-a80
   allwinner,sun50i-a64

Documentation/devicetree/bindings/display/exynos/exynos7-decon.txt

@@ -33,7 +33,7 @@ Required properties:
 - i80-if-timings: timing configuration for lcd i80 interface support.
 
 Optional Properties:
-- samsung,power-domain: a phandle to DECON power domain node.
+- power-domains: a phandle to DECON power domain node.
 - display-timings: timing settings for DECON, as described in document [1].
 		Can be used in case timings cannot be provided otherwise
 		or to override timings provided by the panel.