You've already forked linux-apfs
mirror of
https://github.com/linux-apfs/linux-apfs.git
synced 2026-05-01 15:00:59 -07:00
i2c: uniphier_f: add UniPhier FIFO-builtin I2C driver
Add support for on-chip I2C controller used on newer UniPhier SoCs such as PH1-Pro4, PH1-Pro5, etc. This adapter is equipped with 8-depth TX/RX FIFOs. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
committed by
Wolfram Sang
parent
dd6fd4a327
commit
6a62974b66
@@ -0,0 +1,25 @@
|
||||
UniPhier I2C controller (FIFO-builtin)
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "socionext,uniphier-fi2c".
|
||||
- #address-cells: should be 1.
|
||||
- #size-cells: should be 0.
|
||||
- reg: offset and length of the register set for the device.
|
||||
- interrupts: a single interrupt specifier.
|
||||
- clocks: phandle to the input clock.
|
||||
|
||||
Optional properties:
|
||||
- clock-frequency: desired I2C bus frequency in Hz. The maximum supported
|
||||
value is 400000. Defaults to 100000 if not specified.
|
||||
|
||||
Examples:
|
||||
|
||||
i2c0: i2c@58780000 {
|
||||
compatible = "socionext,uniphier-fi2c";
|
||||
reg = <0x58780000 0x80>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <0 41 4>;
|
||||
clocks = <&i2c_clk>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
@@ -910,6 +910,14 @@ config I2C_UNIPHIER
|
||||
the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
|
||||
or older UniPhier SoCs.
|
||||
|
||||
config I2C_UNIPHIER_F
|
||||
tristate "UniPhier FIFO-builtin I2C controller"
|
||||
depends on ARCH_UNIPHIER
|
||||
help
|
||||
If you say yes to this option, support will be included for
|
||||
the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
|
||||
PH1-Pro5, or newer UniPhier SoCs.
|
||||
|
||||
config I2C_VERSATILE
|
||||
tristate "ARM Versatile/Realview I2C bus support"
|
||||
depends on ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS
|
||||
|
||||
@@ -88,6 +88,7 @@ obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
|
||||
obj-$(CONFIG_I2C_SUN6I_P2WI) += i2c-sun6i-p2wi.o
|
||||
obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o
|
||||
obj-$(CONFIG_I2C_UNIPHIER) += i2c-uniphier.o
|
||||
obj-$(CONFIG_I2C_UNIPHIER_F) += i2c-uniphier-f.o
|
||||
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
|
||||
obj-$(CONFIG_I2C_WMT) += i2c-wmt.o
|
||||
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Reference in New Issue
Block a user