[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices

Added ppc_sys device and system definitions for PowerQUICC I devices.  This
will allow drivers for PQI to be proper platform device drivers.  Currently
sys section contains only MPC885 and MPC866.  Identification should be done
with identify_ppc_sys_by_name call, with board-specific "name" string
passed, since PQI do not have any register that could identify the SOC.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

include/asm-ppc/irq.h

@@ -138,6 +138,16 @@ irq_canonicalize(int irq)
 #define	SIU_IRQ7	(14)
 #define	SIU_LEVEL7	(15)
 
+#define MPC8xx_INT_FEC1		SIU_LEVEL1
+#define MPC8xx_INT_FEC2		SIU_LEVEL3
+
+#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
+#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
+#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
+#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
+#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
+
 /* The internal interrupts we can configure as we see fit.
  * My personal preference is CPM at level 2, which puts it above the
  * MBX PCI/ISA/IDE interrupts.

include/asm-ppc/mpc8xx.h

@@ -97,6 +97,22 @@ extern unsigned char __res[];
 
 struct pt_regs;
 
+enum ppc_sys_devices {
+	MPC8xx_CPM_FEC1,
+	MPC8xx_CPM_FEC2,
+	MPC8xx_CPM_I2C,
+	MPC8xx_CPM_SCC1,
+	MPC8xx_CPM_SCC2,
+	MPC8xx_CPM_SCC3,
+	MPC8xx_CPM_SCC4,
+	MPC8xx_CPM_SPI,
+	MPC8xx_CPM_MCC1,
+	MPC8xx_CPM_MCC2,
+	MPC8xx_CPM_SMC1,
+	MPC8xx_CPM_SMC2,
+	MPC8xx_CPM_USB,
+};
+
 #endif /* !__ASSEMBLY__ */
 #endif /* CONFIG_8xx */
 #endif /* __CONFIG_8xx_DEFS */

include/asm-ppc/ppc_sys.h

@@ -27,6 +27,8 @@
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_8xx)
+#include <asm/mpc8xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)
 #include <asm/mpc52xx.h>
 #elif defined(CONFIG_MPC10X_BRIDGE)