apfs/linux-apfs
0
0
Fork 0
mirror of https://github.com/linux-apfs/linux-apfs.git synced 2026-05-01 15:00:59 -07:00
Code Issues Packages Projects Releases Wiki Activity

[PATCH] mips: nuke trailing whitespace

Browse Source 
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
Ralf Baechle
2005-09-03 15:56:17 -07:00
committed by Linus Torvalds
parent 875d43e72b
commit 42a3b4f25a
137 changed files with 596 additions and 596 deletions
Download Patch File Download Diff File Expand all files Collapse all files
arch/mips/pci/fixup-ddb5074.c
+1 -1
View File
@@ -5,7 +5,7 @@ static void ddb5074_fixup(struct pci_dev *dev)
{
extern struct pci_dev *pci_pmu;
u8 t8;
pci_pmu = dev; /* for LEDs D2 and D3 */
/* Program the lines for LEDs D2 and D3 to output */
pci_read_config_byte(dev, 0x7d, &t8);
arch/mips/pci/fixup-ddb5477.c
+1 -1
View File
@@ -65,7 +65,7 @@ static void ddb5477_amd_lance_fixup(struct pci_dev *dev)
ioaddr = pci_resource_start(dev, 0);
inw(ioaddr + PCNET32_WIO_RESET); /* reset chip */
/* bcr_18 |= 0x0800 */
outw(18, ioaddr + PCNET32_WIO_RAP);
temp = inw(ioaddr + PCNET32_WIO_BDP);
arch/mips/pci/fixup-malta.c
+1 -1
View File
@@ -56,7 +56,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
0, 0, 0, 3,
4, 5, 6, 7,
0, 9, 10, 11,
12, 0, 14, 15
12, 0, 14, 15
};
int i;
arch/mips/pci/fixup-rbtx4927.c
+1 -1
View File
@@ -7,7 +7,7 @@
* Author: MontaVista Software, Inc.
* ppopov@mvista.com or source@mvista.com
*
* Copyright (C) 2000-2001 Toshiba Corporation
* Copyright (C) 2000-2001 Toshiba Corporation
*
* Copyright (C) 2004 MontaVista Software Inc.
* Author: Manish Lachwani (mlachwani@mvista.com)
arch/mips/pci/fixup-sni.c
+1 -1
View File
@@ -32,7 +32,7 @@
* Device 4: Unused
* Device 5: Slot 2
* Device 6: Slot 3
* Device 7: Slot 4
* Device 7: Slot 4
*
* Documentation says the VGA is device 5 and device 3 is unused but that
* seem to be a documentation error. At least on my RM200C the Cirrus
arch/mips/pci/ops-ddb5477.c
+2 -2
View File
@@ -127,7 +127,7 @@ static inline void ddb_close_config_base(struct pci_config_swap *swap)
}
static int read_config_dword(struct pci_config_swap *swap,
struct pci_bus *bus, u32 devfn, u32 where,
struct pci_bus *bus, u32 devfn, u32 where,
u32 * val)
{
u32 bus_num, slot_num, func_num;
@@ -153,7 +153,7 @@ static int read_config_dword(struct pci_config_swap *swap,
}
static int read_config_word(struct pci_config_swap *swap,
struct pci_bus *bus, u32 devfn, u32 where,
struct pci_bus *bus, u32 devfn, u32 where,
u16 * val)
{
int status;
arch/mips/pci/ops-tx4927.c
+3 -3
View File
@@ -1,16 +1,16 @@
/*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ahennessy@mvista.com
* ahennessy@mvista.com
*
* Copyright (C) 2000-2001 Toshiba Corporation
* Copyright (C) 2000-2001 Toshiba Corporation
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
* Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
*
* Define the pci_ops for the Toshiba rbtx4927
*
* Much of the code is derived from the original DDB5074 port by
* Much of the code is derived from the original DDB5074 port by
* Geert Uytterhoeven <geert@sonycom.com>
*
* Copyright 2004 MontaVista Software Inc.
arch/mips/pci/pci-ddb5477.c
+4 -4
View File
@@ -76,7 +76,7 @@ struct pci_controller ddb5477_io_controller = {
*/
/*
* irq mapping : device -> pci int # -> vrc4377 irq# ,
* irq mapping : device -> pci int # -> vrc4377 irq# ,
* ddb5477 board manual page 4 and vrc5477 manual page 46
*/
@@ -137,9 +137,9 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
unsigned char *slot_irq_map;
unsigned char irq;
/*
/*
* We ignore the swizzled slot and pin values. The original
* pci_fixup_irq() codes largely base irq number on the dev slot
* pci_fixup_irq() codes largely base irq number on the dev slot
* numbers because except for one case they are unique even
* though there are multiple pci buses.
*/
@@ -160,7 +160,7 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
if (mips_machtype == MACH_NEC_ROCKHOPPERII) {
/* hack to distinquish overlapping slot 20s, one
* on bus 0 (ALI USB on the M1535 on the backplane),
* on bus 0 (ALI USB on the M1535 on the backplane),
* and one on bus 2 (NEC USB controller on the CPU board)
* Make the M1535 USB - ISA IRQ number 9.
*/
arch/mips/pci/pci.c
+2 -2
View File
@@ -132,7 +132,7 @@ static int __init pcibios_init(void)
hose->need_domain_info = need_domain_info;
next_busno = bus->subordinate + 1;
/* Don't allow 8-bit bus number overflow inside the hose -
reserve some space for bridges. */
reserve some space for bridges. */
if (next_busno > 224) {
next_busno = 0;
need_domain_info = 1;
@@ -260,7 +260,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_read_bridge_bases(bus);
pcibios_fixup_device_resources(dev, bus);
}
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
struct pci_dev *dev = pci_dev_b(ln);