doc: fix broken references

There are numerous broken references to Documentation files (in other
Documentation files, in comments, etc.). These broken references are
caused by typo's in the references, and by renames or removals of the
Documentation files. Some broken references are simply odd.

Fix these broken references, sometimes by dropping the irrelevant text
they were part of.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/PCI/pci.txt

@@ -314,7 +314,7 @@ from the PCI device config space. Use the values in the pci_dev structure
 as the PCI "bus address" might have been remapped to a "host physical"
 address by the arch/chip-set specific kernel support.
 
-See Documentation/IO-mapping.txt for how to access device registers
+See Documentation/io-mapping.txt for how to access device registers
 or device memory.
 
 The device driver needs to call pci_request_region() to verify

Documentation/blackfin/bfin-gpio-notes.txt

@@ -1,5 +1,5 @@
 /*
- * File:         Documentation/blackfin/bfin-gpio-note.txt
+ * File:         Documentation/blackfin/bfin-gpio-notes.txt
  * Based on:
  * Author:
  *

Documentation/block/biodoc.txt

@@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
 do not have a corresponding kernel virtual address space mapping) and
 low-memory pages.
 
-Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
+Note: Please refer to Documentation/DMA-API-HOWTO.txt for a discussion
 on PCI high mem DMA aspects and mapping of scatter gather lists, and support
 for 64 bit PCI.
 

Documentation/bus-virt-phys-mapping.txt

@@ -1,6 +1,6 @@
 [ NOTE: The virt_to_bus() and bus_to_virt() functions have been
 	superseded by the functionality provided by the PCI DMA interface
-	(see Documentation/PCI/PCI-DMA-mapping.txt).  They continue
+	(see Documentation/DMA-API-HOWTO.txt).  They continue
 	to be documented below for historical purposes, but new code
 	must not use them. --davidm 00/12/12 ]
 

Documentation/cdrom/packet-writing.txt

@@ -109,7 +109,7 @@ this interface. (see http://tom.ist-im-web.de/download/pktcdvd )
 
 For a description of the sysfs interface look into the file:
 
-  Documentation/ABI/testing/sysfs-block-pktcdvd
+  Documentation/ABI/testing/sysfs-class-pktcdvd
 
 
 Using the pktcdvd debugfs interface

Documentation/development-process/4.Coding

@@ -278,7 +278,7 @@ enabled, a configurable percentage of memory allocations will be made to
 fail; these failures can be restricted to a specific range of code.
 Running with fault injection enabled allows the programmer to see how the
 code responds when things go badly.  See
-Documentation/fault-injection/fault-injection.text for more information on
+Documentation/fault-injection/fault-injection.txt for more information on
 how to use this facility.
 
 Other kinds of errors can be found with the "sparse" static analysis tool.

Documentation/devicetree/bindings/gpio/led.txt

@@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED.
 
 LED sub-node properties:
 - gpios :  Should specify the LED's GPIO, see "Specifying GPIO information
-  for devices" in Documentation/powerpc/booting-without-of.txt.  Active
+  for devices" in Documentation/devicetree/booting-without-of.txt.  Active
   low LEDs should be indicated using flags in the GPIO specifier.
 - label :  (optional) The label for this LED.  If omitted, the label is
   taken from the node name (excluding the unit address).

Documentation/filesystems/caching/object.txt

@@ -127,9 +127,9 @@ fscache_enqueue_object()).
 PROVISION OF CPU TIME
 ---------------------
 
-The work to be done by the various states is given CPU time by the threads of
-the slow work facility (see Documentation/slow-work.txt).  This is used in
-preference to the workqueue facility because:
+The work to be done by the various states was given CPU time by the threads of
+the slow work facility.  This was used in preference to the workqueue facility
+because:
 
  (1) Threads may be completely occupied for very long periods of time by a
      particular work item.  These state actions may be doing sequences of

Documentation/filesystems/locks.txt

@@ -53,11 +53,12 @@ fcntl(), with all the problems that implies.
 1.3 Mandatory Locking As A Mount Option
 ---------------------------------------
 
-Mandatory locking, as described in 'Documentation/filesystems/mandatory.txt'
-was prior to this release a general configuration option that was valid for
-all mounted filesystems.  This had a number of inherent dangers, not the
-least of which was the ability to freeze an NFS server by asking it to read
-a file for which a mandatory lock existed.
+Mandatory locking, as described in
+'Documentation/filesystems/mandatory-locking.txt' was prior to this release a
+general configuration option that was valid for all mounted filesystems.  This
+had a number of inherent dangers, not the least of which was the ability to
+freeze an NFS server by asking it to read a file for which a mandatory lock
+existed.
 
 From this release of the kernel, mandatory locking can be turned on and off
 on a per-filesystem basis, using the mount options 'mand' and 'nomand'.

Documentation/filesystems/nfs/idmapper.txt

@@ -47,7 +47,7 @@ request-key will find the first matching line and corresponding program.  In
 this case, /some/other/program will handle all uid lookups and
 /usr/sbin/nfs.idmap will handle gid, user, and group lookups.
 
-See <file:Documentation/security/keys-request-keys.txt> for more information
+See <file:Documentation/security/keys-request-key.txt> for more information
 about the request-key function.
 
 

Documentation/filesystems/pohmelfs/design_notes.txt

@@ -58,8 +58,9 @@ data transfers.
 POHMELFS clients operate with a working set of servers and are capable of balancing read-only
 operations (like lookups or directory listings) between them according to IO priorities.
 Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
-with write permission turned on. IO priority and permissions can be changed in run-time.
+in Documentation/filesystems/pohmelfs/info.txt file). Writes are replicated to all servers, which
+are connected with write permission turned on. IO priority and permissions can be changed in
+run-time.
 
 POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
 One can select any kernel supported cipher, encryption mode, hash type and operation mode

Documentation/filesystems/proc.txt

@@ -1263,7 +1263,7 @@ review the kernel documentation in the directory /usr/src/linux/Documentation.
 This chapter  is  heavily  based  on the documentation included in the pre 2.2
 kernels, and became part of it in version 2.2.1 of the Linux kernel.
 
-Please see: Documentation/sysctls/ directory for descriptions of these
+Please see: Documentation/sysctl/ directory for descriptions of these
 entries.
 
 ------------------------------------------------------------------------------

Documentation/filesystems/vfs.txt

@@ -1053,9 +1053,6 @@ manipulate dentries:
 	and the dentry is returned. The caller must use dput()
 	to free the dentry when it finishes using it.
 
-For further information on dentry locking, please refer to the document
-Documentation/filesystems/dentry-locking.txt.
-
 Mount Options
 =============
 

Documentation/frv/booting.txt

@@ -180,9 +180,3 @@ separated by spaces:
 
       This tells the kernel what program to run initially. By default this is
       /sbin/init, but /sbin/sash or /bin/sh are common alternatives.
-
-  (*) vdc=...
-
-      This option configures the MB93493 companion chip visual display
-      driver. Please see Documentation/frv/mb93493/vdc.txt for more
-      information.

Documentation/input/input.txt

@@ -111,7 +111,7 @@ LCDs and many other purposes.
 
  The monitor and speaker controls should be easy to add to the hid/input
 interface, but for the UPSs and LCDs it doesn't make much sense. For this,
-the hiddev interface was designed. See Documentation/usb/hiddev.txt
+the hiddev interface was designed. See Documentation/hid/hiddev.txt
 for more information about it.
 
   The usage of the usbhid module is very simple, it takes no parameters,

Documentation/kernel-docs.txt

@@ -300,7 +300,7 @@
        
      * Title: "The Kernel Hacking HOWTO"
        Author: Various Talented People, and Rusty.
-       Location: in kernel tree, Documentation/DocBook/kernel-hacking/
+       Location: in kernel tree, Documentation/DocBook/kernel-hacking.tmpl
        (must be built as "make {htmldocs | psdocs | pdfdocs})
        Keywords: HOWTO, kernel contexts, deadlock, locking, modules,
        symbols, return conventions.
@@ -351,7 +351,7 @@
        
      * Title: "Linux Kernel Locking HOWTO"
        Author: Various Talented People, and Rusty.
-       Location: in kernel tree, Documentation/DocBook/kernel-locking/
+       Location: in kernel tree, Documentation/DocBook/kernel-locking.tmpl
        (must be built as "make {htmldocs | psdocs | pdfdocs})
        Keywords: locks, locking, spinlock, semaphore, atomic, race
        condition, bottom halves, tasklets, softirqs.

Documentation/kernel-parameters.txt

@@ -163,7 +163,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			rsdt -- prefer RSDT over (default) XSDT
 			copy_dsdt -- copy DSDT to memory
 
-			See also Documentation/power/pm.txt, pci=noacpi
+			See also Documentation/power/runtime_pm.txt, pci=noacpi
 
 	acpi_rsdp=	[ACPI,EFI,KEXEC]
 			Pass the RSDP address to the kernel, mostly used
@@ -319,7 +319,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	amijoy.map=	[HW,JOY] Amiga joystick support
 			Map of devices attached to JOY0DAT and JOY1DAT
 			Format: <a>,<b>
-			See also Documentation/kernel/input/joystick.txt
+			See also Documentation/input/joystick.txt
 
 	analog.map=	[HW,JOY] Analog joystick and gamepad support
 			Specifies type or capabilities of an analog joystick
@@ -408,7 +408,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
 	bttv.pll=	See Documentation/video4linux/bttv/Insmod-options
-	bttv.tuner=	and Documentation/video4linux/bttv/CARDLIST
+	bttv.tuner=
 
 	bulk_remove=off	[PPC]  This parameter disables the use of the pSeries
 			firmware feature for flushing multiple hpte entries
@@ -724,7 +724,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 
 	elevator=	[IOSCHED]
 			Format: {"cfq" | "deadline" | "noop"}
-			See Documentation/block/as-iosched.txt and
+			See Documentation/block/cfq-iosched.txt and
 			Documentation/block/deadline-iosched.txt for details.
 
 	elfcorehdr=	[IA-64,PPC,SH,X86]
@@ -765,7 +765,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	fail_make_request=[KNL]
 			General fault injection mechanism.
 			Format: <interval>,<probability>,<space>,<times>
-			See also /Documentation/fault-injection/.
+			See also Documentation/fault-injection/.
 
 	floppy=		[HW]
 			See Documentation/blockdev/floppy.txt.
@@ -2375,7 +2375,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Format: <integer>
 
 	sonypi.*=	[HW] Sony Programmable I/O Control Device driver
-			See Documentation/sonypi.txt
+			See Documentation/laptops/sonypi.txt
 
 	specialix=	[HW,SERIAL] Specialix multi-serial port adapter
 			See Documentation/serial/specialix.txt.

Documentation/laptops/thinkpad-acpi.txt

@@ -736,7 +736,7 @@ status as "unknown". The available commands are:
 sysfs notes:
 
 The ThinkLight sysfs interface is documented by the LED class
-documentation, in Documentation/leds-class.txt.  The ThinkLight LED name
+documentation, in Documentation/leds/leds-class.txt.  The ThinkLight LED name
 is "tpacpi::thinklight".
 
 Due to limitations in the sysfs LED class, if the status of the ThinkLight
@@ -833,7 +833,7 @@ All of the above can be turned on and off and can be made to blink.
 sysfs notes:
 
 The ThinkPad LED sysfs interface is described in detail by the LED class
-documentation, in Documentation/leds-class.txt.
+documentation, in Documentation/leds/leds-class.txt.
 
 The LEDs are named (in LED ID order, from 0 to 12):
 "tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",

Documentation/media-framework.txt

@@ -9,8 +9,8 @@ Introduction
 ------------
 
 The media controller API is documented in DocBook format in
-Documentation/DocBook/v4l/media-controller.xml. This document will focus on
-the kernel-side implementation of the media framework.
+Documentation/DocBook/media/v4l/media-controller.xml. This document will focus
+on the kernel-side implementation of the media framework.
 
 
 Abstract media device model

Documentation/memory-barriers.txt

@@ -438,7 +438,7 @@ There are certain things that the Linux kernel memory barriers do not guarantee:
 	[*] For information on bus mastering DMA and coherency please read:
 
 	    Documentation/PCI/pci.txt
-	    Documentation/PCI/PCI-DMA-mapping.txt
+	    Documentation/DMA-API-HOWTO.txt
 	    Documentation/DMA-API.txt