ASoC: UDA134x codec driver

Signed-off-by: Christian Pellegrin <chripell@fsfe.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

include/sound/l3.h

@@ -0,0 +1,18 @@
+#ifndef _L3_H_
+#define _L3_H_ 1
+
+struct l3_pins {
+	void (*setdat)(int);
+	void (*setclk)(int);
+	void (*setmode)(int);
+	int data_hold;
+	int data_setup;
+	int clock_high;
+	int mode_hold;
+	int mode;
+	int mode_setup;
+};
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len);
+
+#endif

include/sound/uda134x.h

@@ -0,0 +1,26 @@
+/*
+ * uda134x.h  --  UDA134x ALSA SoC Codec driver
+ *
+ * Copyright 2007 Dension Audio Systems Ltd.
+ * Author: Zoltan Devai
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UDA134X_H
+#define _UDA134X_H
+
+#include <sound/l3.h>
+
+struct uda134x_platform_data {
+	struct l3_pins l3;
+	void (*power) (int);
+	int model;
+#define UDA134X_UDA1340 1
+#define UDA134X_UDA1341 2
+#define UDA134X_UDA1344 3
+};
+
+#endif /* _UDA134X_H */

sound/soc/codecs/Kconfig

@@ -10,6 +10,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_TLV320AIC26 if SPI_MASTER
 	select SND_SOC_TLV320AIC3X if I2C
 	select SND_SOC_TWL4030 if TWL4030_CORE
+	select SND_SOC_UDA134X
 	select SND_SOC_UDA1380 if I2C
 	select SND_SOC_WM8510 if (I2C || SPI_MASTER)
 	select SND_SOC_WM8580 if I2C
@@ -66,6 +67,9 @@ config SND_SOC_CS4270_VD33_ERRATA
 	bool
 	depends on SND_SOC_CS4270
 
+config SND_SOC_L3
+       tristate
+
 config SND_SOC_SSM2602
 	tristate
 
@@ -85,6 +89,10 @@ config SND_SOC_TWL4030
 	tristate
 	depends on TWL4030_CORE
 
+config SND_SOC_UDA134X
+       tristate
+       select SND_SOC_L3
+
 config SND_SOC_UDA1380
         tristate
 

sound/soc/codecs/Makefile

@@ -3,11 +3,13 @@ snd-soc-ad1980-objs := ad1980.o
 snd-soc-ad73311-objs := ad73311.o
 snd-soc-ak4535-objs := ak4535.o
 snd-soc-cs4270-objs := cs4270.o
+snd-soc-l3-objs := l3.o
 snd-soc-ssm2602-objs := ssm2602.o
 snd-soc-tlv320aic23-objs := tlv320aic23.o
 snd-soc-tlv320aic26-objs := tlv320aic26.o
 snd-soc-tlv320aic3x-objs := tlv320aic3x.o
 snd-soc-twl4030-objs := twl4030.o
+snd-soc-uda134x-objs := uda134x.o
 snd-soc-uda1380-objs := uda1380.o
 snd-soc-wm8510-objs := wm8510.o
 snd-soc-wm8580-objs := wm8580.o
@@ -27,11 +29,13 @@ obj-$(CONFIG_SND_SOC_AD1980)	+= snd-soc-ad1980.o
 obj-$(CONFIG_SND_SOC_AD73311) += snd-soc-ad73311.o
 obj-$(CONFIG_SND_SOC_AK4535)	+= snd-soc-ak4535.o
 obj-$(CONFIG_SND_SOC_CS4270)	+= snd-soc-cs4270.o
+obj-$(CONFIG_SND_SOC_L3)	+= snd-soc-l3.o
 obj-$(CONFIG_SND_SOC_SSM2602)	+= snd-soc-ssm2602.o
 obj-$(CONFIG_SND_SOC_TLV320AIC23)	+= snd-soc-tlv320aic23.o
 obj-$(CONFIG_SND_SOC_TLV320AIC26)	+= snd-soc-tlv320aic26.o
 obj-$(CONFIG_SND_SOC_TLV320AIC3X)	+= snd-soc-tlv320aic3x.o
 obj-$(CONFIG_SND_SOC_TWL4030)	+= snd-soc-twl4030.o
+obj-$(CONFIG_SND_SOC_UDA134X)	+= snd-soc-uda134x.o
 obj-$(CONFIG_SND_SOC_UDA1380)	+= snd-soc-uda1380.o
 obj-$(CONFIG_SND_SOC_WM8510)	+= snd-soc-wm8510.o
 obj-$(CONFIG_SND_SOC_WM8580)	+= snd-soc-wm8580.o

sound/soc/codecs/l3.c

@@ -0,0 +1,91 @@
+/*
+ * L3 code
+ *
+ *  Copyright (C) 2008, Christian Pellegrin <chripell@evolware.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * based on:
+ *
+ * L3 bus algorithm module.
+ *
+ *  Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+
+#include <sound/l3.h>
+
+/*
+ * Send one byte of data to the chip.  Data is latched into the chip on
+ * the rising edge of the clock.
+ */
+static void sendbyte(struct l3_pins *adap, unsigned int byte)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		adap->setclk(0);
+		udelay(adap->data_hold);
+		adap->setdat(byte & 1);
+		udelay(adap->data_setup);
+		adap->setclk(1);
+		udelay(adap->clock_high);
+		byte >>= 1;
+	}
+}
+
+/*
+ * Send a set of bytes to the chip.  We need to pulse the MODE line
+ * between each byte, but never at the start nor at the end of the
+ * transfer.
+ */
+static void sendbytes(struct l3_pins *adap, const u8 *buf,
+		      int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++) {
+		if (i) {
+			udelay(adap->mode_hold);
+			adap->setmode(0);
+			udelay(adap->mode);
+		}
+		adap->setmode(1);
+		udelay(adap->mode_setup);
+		sendbyte(adap, buf[i]);
+	}
+}
+
+int l3_write(struct l3_pins *adap, u8 addr, u8 *data, int len)
+{
+	adap->setclk(1);
+	adap->setdat(1);
+	adap->setmode(1);
+	udelay(adap->mode);
+
+	adap->setmode(0);
+	udelay(adap->mode_setup);
+	sendbyte(adap, addr);
+	udelay(adap->mode_hold);
+
+	sendbytes(adap, data, len);
+
+	adap->setclk(1);
+	adap->setdat(1);
+	adap->setmode(0);
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(l3_write);
+
+MODULE_DESCRIPTION("L3 bit-banging driver");
+MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
+MODULE_LICENSE("GPL");

sound/soc/codecs/uda134x_codec.h

@@ -0,0 +1,36 @@
+#ifndef _UDA134X_CODEC_H
+#define _UDA134X_CODEC_H
+
+#define UDA134X_L3ADDR	5
+#define UDA134X_DATA0_ADDR	((UDA134X_L3ADDR << 2) | 0)
+#define UDA134X_DATA1_ADDR	((UDA134X_L3ADDR << 2) | 1)
+#define UDA134X_STATUS_ADDR	((UDA134X_L3ADDR << 2) | 2)
+
+#define UDA134X_EXTADDR_PREFIX	0xC0
+#define UDA134X_EXTDATA_PREFIX	0xE0
+
+/* UDA134X registers */
+#define UDA134X_EA000	0
+#define UDA134X_EA001	1
+#define UDA134X_EA010	2
+#define UDA134X_EA011	3
+#define UDA134X_EA100	4
+#define UDA134X_EA101	5
+#define UDA134X_EA110	6
+#define UDA134X_EA111	7
+#define UDA134X_STATUS0 8
+#define UDA134X_STATUS1 9
+#define UDA134X_DATA000 10
+#define UDA134X_DATA001 11
+#define UDA134X_DATA010 12
+#define UDA134X_DATA1	13
+
+#define UDA134X_REGS_NUM 14
+
+#define STATUS0_DAIFMT_MASK (~(7<<1))
+#define STATUS0_SYSCLK_MASK (~(3<<4))
+
+extern struct snd_soc_dai uda134x_dai;
+extern struct snd_soc_codec_device soc_codec_dev_uda134x;
+
+#endif