Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c changes from Wolfram Sang:
 - new drivers for exynos5, bcm kona, and st micro
 - bigger overhauls for drivers mxs and rcar
 - typical driver bugfixes, cleanups, improvements
 - got rid of the superfluous 'driver' member in i2c_client struct This
   touches a few drivers in other subsystems.  All acked.

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()
  i2c: i2c-eg20t: do not print error message in syslog if no ACK received
  i2c: bcm-kona: Introduce Broadcom I2C Driver
  i2c: cbus-gpio: Fix device tree binding
  i2c: wmt: add missing clk_disable_unprepare() on error
  i2c: designware: add new ACPI IDs
  i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
  i2c: exynos5: Remove incorrect clk_disable_unprepare
  i2c: i2c-st: Add ST I2C controller
  i2c: exynos5: add High Speed I2C controller driver
  i2c: rcar: fixup rcar type naming
  i2c: scmi: remove some bogus NULL checks
  i2c: sh_mobile & rcar: Enable the driver on all ARM platforms
  i2c: sh_mobile: Convert to clk_prepare/unprepare
  i2c: mux: gpio: use reg value for i2c_add_mux_adapter
  i2c: mux: gpio: use gpio_set_value_cansleep()
  i2c: Include linux/of.h header
  i2c: mxs: Fix PIO mode on i.MX23
  i2c: mxs: Rework the PIO mode operation
  i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller
  ...

drivers/media/v4l2-core/tuner-core.c

@@ -43,7 +43,7 @@
 
 #define UNSET (-1U)
 
-#define PREFIX (t->i2c->driver->driver.name)
+#define PREFIX (t->i2c->dev.driver->name)
 
 /*
  * Driver modprobe parameters
@@ -452,7 +452,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
 	}
 
 	tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
-		  c->adapter->name, c->driver->driver.name, c->addr << 1, type,
+		  c->adapter->name, c->dev.driver->name, c->addr << 1, type,
 		  t->mode_mask);
 	return;
 
@@ -556,7 +556,7 @@ static void tuner_lookup(struct i2c_adapter *adap,
 		int mode_mask;
 
 		if (pos->i2c->adapter != adap ||
-		    strcmp(pos->i2c->driver->driver.name, "tuner"))
+		    strcmp(pos->i2c->dev.driver->name, "tuner"))
 			continue;
 
 		mode_mask = pos->mode_mask;

drivers/media/v4l2-core/v4l2-common.c

@@ -236,14 +236,14 @@ void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
 	v4l2_subdev_init(sd, ops);
 	sd->flags |= V4L2_SUBDEV_FL_IS_I2C;
 	/* the owner is the same as the i2c_client's driver owner */
-	sd->owner = client->driver->driver.owner;
+	sd->owner = client->dev.driver->owner;
 	sd->dev = &client->dev;
 	/* i2c_client and v4l2_subdev point to one another */
 	v4l2_set_subdevdata(sd, client);
 	i2c_set_clientdata(client, sd);
 	/* initialize name */
 	snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
-		client->driver->driver.name, i2c_adapter_id(client->adapter),
+		client->dev.driver->name, i2c_adapter_id(client->adapter),
 		client->addr);
 }
 EXPORT_SYMBOL_GPL(v4l2_i2c_subdev_init);
@@ -274,11 +274,11 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
 	   loaded. This delay-load mechanism doesn't work if other drivers
 	   want to use the i2c device, so explicitly loading the module
 	   is the best alternative. */
-	if (client == NULL || client->driver == NULL)
+	if (client == NULL || client->dev.driver == NULL)
 		goto error;
 
 	/* Lock the module so we can safely get the v4l2_subdev pointer */
-	if (!try_module_get(client->driver->driver.owner))
+	if (!try_module_get(client->dev.driver->owner))
 		goto error;
 	sd = i2c_get_clientdata(client);
 
@@ -287,7 +287,7 @@ struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
 	if (v4l2_device_register_subdev(v4l2_dev, sd))
 		sd = NULL;
 	/* Decrease the module use count to match the first try_module_get. */
-	module_put(client->driver->driver.owner);
+	module_put(client->dev.driver->owner);
 
 error:
 	/* If we have a client but no subdev, then something went wrong and