apfstests/tests/xfs/516

#! /bin/bash
# SPDX-License-Identifier: GPL-2.0-or-later
# Copyright (c) 2020, Oracle and/or its affiliates.  All Rights Reserved.
#
# FS QA Test No. 516
#
# Update sunit and width and make sure that the filesystem still passes
# xfs_repair afterwards.

seq=`basename $0`
seqres=$RESULT_DIR/$seq
echo "QA output created by $seq"

here=`pwd`
tmp=/tmp/$$
status=1    # failure is the default!
trap "_cleanup; exit \$status" 0 1 2 3 15

_cleanup()
{
	rm -f $tmp.*
	cd /
}

rm -f $seqres.full

# get standard environment, filters and checks
. ./common/rc
. ./common/fuzzy

# real QA test starts here
_supported_fs xfs
_require_scratch_nocheck

# Assume that if we can run scrub on the test dev we can run it on the scratch
# fs too.
run_scrub=0
_supports_xfs_scrub $TEST_DIR $TEST_DEV && run_scrub=1

log()
{
	echo "$@" | tee -a $seqres.full /dev/ttyprintk
}

__test_mount_opts()
{
	local mounted=0

	# Try to mount the fs with our test options.
	_try_scratch_mount "$@" >> $seqres.full 2>&1 && mounted=1
	if [ $mounted -gt 0 ]; then
		# Implant a sentinel file to see if repair nukes the directory
		# later.  Scrub, unmount, and check for errors.
		echo moo > $SCRATCH_MNT/a
		grep "$SCRATCH_MNT" /proc/mounts >> $seqres.full
		test $run_scrub -gt 0 && \
			_scratch_scrub -n >> $seqres.full
		_scratch_unmount
		_scratch_xfs_repair -n >> $seqres.full 2>&1 || \
			echo "Repair found problems."
	else
		echo "mount failed" >> $seqres.full
	fi
	_scratch_xfs_get_sb_field unit >> $seqres.full
	_scratch_xfs_get_sb_field width  >> $seqres.full

	# Run xfs_repair in repair mode to see if it can be baited into nuking
	# the root filesystem on account of the sunit update.
	_scratch_xfs_repair >> $seqres.full 2>&1

	# If the previous mount succeeded, mount the fs and look for the file
	# we implanted.
	if [ $mounted -gt 0 ]; then
		_scratch_mount
		test -f $SCRATCH_MNT/a || echo "Root directory got nuked."
		_scratch_unmount
	fi

	echo >> $seqres.full
}

test_sunit_opts()
{
	echo "Format with 4k stripe unit; 1x stripe width" >> $seqres.full
	_scratch_mkfs -b size=4k -d sunit=8,swidth=8 >> $seqres.full 2>&1

	__test_mount_opts "$@"
}

test_su_opts()
{
	local mounted=0

	echo "Format with 256k stripe unit; 4x stripe width" >> $seqres.full
	_scratch_mkfs -b size=1k -d su=256k,sw=4 >> $seqres.full 2>&1

	__test_mount_opts "$@"
}

test_repair_detection()
{
	local mounted=0

	echo "Format with 256k stripe unit; 4x stripe width" >> $seqres.full
	_scratch_mkfs -b size=1k -d su=256k,sw=4 >> $seqres.full 2>&1

	# Try to mount the fs with our test options.
	_try_scratch_mount >> $seqres.full 2>&1 && mounted=1
	if [ $mounted -gt 0 ]; then
		# Implant a sentinel file to see if repair nukes the directory
		# later.  Scrub, unmount, and check for errors.
		echo moo > $SCRATCH_MNT/a
		grep "$SCRATCH_MNT" /proc/mounts >> $seqres.full
		test $run_scrub -gt 0 && \
			_scratch_scrub -n >> $seqres.full
		_scratch_unmount
		_scratch_xfs_repair -n >> $seqres.full 2>&1 || \
			echo "Repair found problems."
	else
		echo "mount failed" >> $seqres.full
	fi

	# Update the superblock like the kernel used to do.
	_scratch_xfs_get_sb_field unit >> $seqres.full
	_scratch_xfs_get_sb_field width >> $seqres.full
	_scratch_xfs_set_sb_field unit 256 >> $seqres.full
	_scratch_xfs_set_sb_field width 1024 >> $seqres.full
	_scratch_xfs_get_sb_field unit >> $seqres.full
	_scratch_xfs_get_sb_field width >> $seqres.full

	# Run xfs_repair in repair mode to see if it can be baited into nuking
	# the root filesystem on account of the sunit update.
	_scratch_xfs_repair >> $seqres.full 2>&1

	# If the previous mount succeeded, mount the fs and look for the file
	# we implanted.
	if [ $mounted -gt 0 ]; then
		_scratch_mount
		test -f $SCRATCH_MNT/a || echo "Root directory got nuked."
		_scratch_unmount
	fi

	echo >> $seqres.full
}

# Format with a 256k stripe unit and 4x stripe width, and try various mount
# options that want to change that and see if they blow up.  Normally you
# would never change the stripe *unit*, so it's no wonder this is not well
# tested.

log "Test: no raid parameters"
test_su_opts

log "Test: 256k stripe unit; 4x stripe width"
test_su_opts -o sunit=512,swidth=2048

log "Test: 256k stripe unit; 5x stripe width"
test_su_opts -o sunit=512,swidth=2560

# Note: Larger stripe units probably won't mount
log "Test: 512k stripe unit; 4x stripe width"
test_su_opts -o sunit=1024,swidth=4096

log "Test: 512k stripe unit; 3x stripe width"
test_su_opts -o sunit=1024,swidth=3072

# Note: Should succeed with kernel warnings, and should not create repair
# failures or nuke the root directory.
log "Test: 128k stripe unit; 8x stripe width"
test_su_opts -o sunit=256,swidth=2048

# Note: Should succeed without nuking the root dir
log "Test: Repair of 128k stripe unit; 8x stripe width"
test_repair_detection

# Brian Foster noticed a bug in an earlier version of the patch that avoids
# updating the ondisk sunit/swidth values if they would cause later repair
# failures.  The bug was that we wouldn't convert the kernel mount option sunit
# value to the correct incore units until after computing the inode geometry.
# This caused it to behave incorrectly when the filesystem was formatted with
# sunit=1fsb and the mount options try to increase swidth.
log "Test: Formatting with sunit=1fsb,swidth=1fsb and mounting with larger swidth"
test_sunit_opts -o sunit=8,swidth=64

# success, all done
status=0
exit