Files
apfstests/042
T
Christoph Hellwig f381f98206 xfstests: move GPL boilerplates to fix lsqa.pl
It turns out lsqa.pl nees the test number and description first in the
file, so move the GPL boilerplates below it.

Also remove acouple of cases where we have one full copyright line + gpl
boilerplate before the description and another copyright line after
the description.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-05-28 17:04:15 +02:00

149 lines
4.3 KiB
Bash
Executable File

#! /bin/sh
# FS QA Test No. 042
#
# xfs_fsr QA tests
# create a large fragmented file and check that xfs_fsr doesn't corrupt
# it or the other contents of the filesystem
#
#-----------------------------------------------------------------------
# Copyright (c) 2000-2002 Silicon Graphics, Inc. All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
#
#-----------------------------------------------------------------------
#
set +x
# creator
owner=ajag@sgi.com
seq=`basename $0`
echo "QA output created by $seq"
here=`pwd`
tmp=/tmp/$$
status=1 # failure is the default!
_cleanup()
{
umount $SCRATCH_MNT
rm -f $tmp.*
}
trap "_cleanup ; exit \$status" 0 1 2 3 15
# get standard environment, filters and checks
. ./common.rc
. ./common.filter
# real QA test starts here
_supported_fs xfs
_supported_os IRIX Linux
_require_scratch
[ "$XFS_FSR_PROG" = "" ] && _notrun "xfs_fsr not found"
_cull_files()
{
perl -e "\$manifest=\"$tmp.manifest\";" -e '
open MANIFEST, $manifest;
@in = <MANIFEST>;
close MANIFEST;
open MANIFEST, ">$manifest";
for ($i = 0; $i < @in; $i++) {
if (($i+1) % 2 == 0) {
# remove every second file
chomp($s = $in[$i]);
if (unlink($s) != 1) {
print "_cull_files: could not delete \"$s\"\n";
exit(1);
}
}
else {
print MANIFEST $in[$i];
}
}
close MANIFEST;
exit(0);'
}
# create a large contiguous file using dd
# use fill2fs to fill the filesystem up with 4k sized files
# fill any remaining space using dd
# delete every second 4k file - remaining free space should be fragmented
# use fill2 to generate a very large file - run it until it fails producing a truncated file
# delete the dd-generated file
# run xfs_fsr on the filesystem
# check checksums for remaining files
# create 3 minimum sized (16Mb) allocation groups
# xfs_repair is going to need three to verify the superblock
rm -f $seq.full
_do_die_on_error=message_only
echo -n "Make a 48 megabyte filesystem on SCRATCH_DEV and mount... "
_scratch_mkfs_xfs -dsize=48m,agcount=3 2>&1 >/dev/null || _fail "mkfs failed"
_scratch_mount || _fail "mount failed"
echo "done"
echo -n "Reserve 16 1Mb unfragmented regions... "
for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
do
_do "dd if=/dev/zero of=$SCRATCH_MNT/hole$i bs=4096 count=256"
_do "dd if=/dev/zero of=$SCRATCH_MNT/space$i bs=4096 count=1"
_do "xfs_bmap -v $SCRATCH_MNT/hole$i"
done
echo "done"
# set up filesystem
echo -n "Fill filesystem with 4k files, generate manifest... "
fill_options="--verbose --seed=0 --filesize=4096 --stddev=0 --sync=1000000"
_do "src/fill2fs $fill_options --dir=$SCRATCH_MNT/fill --list=- > $tmp.manifest"
echo "done"
# flush the filesystem - make sure there is no space "lost" to pre-allocation
_do "umount $SCRATCH_MNT"
_do "_scratch_mount"
echo -n "Use up any further available space using dd... "
_do "dd if=/dev/zero of=$SCRATCH_MNT/pad bs=4096"
echo "done"
# create fragmented file
_do "Delete every second file" "_cull_files"
echo -n "Create one very large file... "
_do "src/fill2 -d nbytes=16000000,file=$SCRATCH_MNT/fragmented"
echo "done"
_do "xfs_bmap -v $SCRATCH_MNT/fragmented"
_do "sum $SCRATCH_MNT/fragmented >$tmp.sum1"
_do "Remove other files" "rm -rf $SCRATCH_MNT/{pad,hole*}"
# defragment
_do "Run xfs_fsr on filesystem" "$XFS_FSR_PROG -v $SCRATCH_MNT/fragmented"
_do "xfs_bmap -v $SCRATCH_MNT/fragmented"
_do "Check 4k files" "src/fill2fs_check $tmp.manifest"
# check
echo -n "Check large file... "
_do "sum $SCRATCH_MNT/fragmented >$tmp.sum2"
if ! _do "diff $tmp.sum1 $tmp.sum2"; then
echo "fail"
echo "File is corrupt/missing after fsr. Test failed see $seq.full"
status=1; exit
fi
echo "done"
_do "Checking filesystem" "_check_scratch_fs"
# success, all done
echo "xfs_fsr tests passed."
status=0 ; exit