apfstests/071

#! /bin/sh
# FS QA Test No. 071
#
# Exercise IO at large file offsets.
#-----------------------------------------------------------------------
# Copyright (c) 2000-2003 Silicon Graphics, Inc.  All Rights Reserved.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it would be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write the Free Software Foundation,
# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
#
#-----------------------------------------------------------------------
#
# creator
owner=nathans@sgi.com

seq=`basename $0`
echo "QA output created by $seq"
rm -f $seq.full

here=`pwd`
tmp=/tmp/$$
status=1	# failure is the default!

_cleanup()
{
    cd /
    rm -f $tmp.*
    umount $SCRATCH_DEV 2>/dev/null
}
trap "_cleanup; exit \$status" 0 1 2 3 15

# get standard environment, filters and checks
. ./common.rc
. ./common.filter

_filter_io()
{
    sed -e "s/$dbsize/1FSB/g" -e '/.* ops; /d'
}

_filter_off()
{
    sed -e "s/$1/<OFFSET>/g" | _filter_io
}

_filter_xfs_io()
{
    sed -e "s/[0-9/.]* bytes, [0-9] ops\; [0-9/.]* sec ([0-9/.]* [MKiBbytes]*\/sec and [0-9/.]* ops\/sec)/XXX bytes, X ops\; XXX sec (X YYY\/sec and XXX ops\/sec/"
}

write_block()
{
    location=$1
    words=$2
    offset=$3
    bytes=$4
    direct=$5

    [ `$direct` ] && flags=-d

    echo "Writing $bytes bytes, offset is $words (direct=$direct)" | _filter_io
    echo "Writing $bytes bytes at $location $words (direct=$direct)" >>$seq.full
    $XFS_IO_PROG -c "pwrite $offset 512" $flags $SCRATCH_MNT/$seq \
	2>&1 | _filter_off $offset | _filter_xfs_io | tee -a $seq.full
    xfs_bmap -v $SCRATCH_MNT/$seq >>$seq.full

    echo "Reading $bytes bytes (direct=$direct)" | _filter_io
    echo "Reading $bytes bytes at $location (direct=$direct)" >>$seq.full
    $XFS_IO_PROG -c "pread $offset $bytes" $flags $SCRATCH_MNT/$seq \
	2>&1 | _filter_off $offset | _filter_xfs_io | tee -a $seq.full

    $XFS_IO_PROG -c "pread -v $offset $bytes" $flags $SCRATCH_MNT/$seq >>$seq.full

    echo | tee -a $seq.full
}

# real QA test starts here
_supported_fs xfs
_supported_os IRIX Linux

[ -n "$XFS_IO_PROG" ] || _notrun "xfs_io executable not found"

_require_scratch
_scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
. $tmp.mkfs
echo
_scratch_mount

# Okay... filesize limit depends on blocksize, bits per long and
# also if large block device patch is enabled (can't dynamically
# check that, so use env var USE_LBD_PATCH to override default).
# 
# Note:
# We check from 1Tb below our guessed limit to 1Tb above it, and
# see what happens for each 1Tb increment along the way (first
# half should succeed, second half should fail to create a file).
# So, number calculated here is not the actual limit, its a ways
# above that, hopefully.

bitsperlong=`src/feature -w`
if [ "$bitsperlong" -eq 32 ]; then
    upperbound=`expr $dbsize / 512`
    # which is 8(TB) for 4K, 4(TB) for 2k, ... etc.
    [ "$USE_LBD_PATCH" = yes ] && upperbound=16
    # limited by page cache index when LBD patch onboard.
else
    upperbound=`echo 8 \* 1024 \* 1024 | bc` 
    # 8 exabytes (working in TBs below)
fi

# Step from (upperbound-1)(Tb) through (upperbound+1(Tb), &
# seeks/writes/reads on each boundary (using holey files) -
# 1byte back from the boundary, and 1FSB back from the same
# boundary (and stash xfs_bmap output), before moving onto
# each new test point.

$XFS_IO_PROG -c "truncate 0" -f $SCRATCH_MNT/$seq

oneTB=`echo 1024 \* 1024 \* 1024 \* 1024 | bc`
count=`expr $upperbound - 1`
upperbound=`expr $upperbound + 1`

while [ $count -le $upperbound ]
do
    # buffered IO
    offset=`echo $oneTB \* $count | bc`
    write_block $count "+0" $offset 512 false
    offset=`echo $oneTB \* $count \- 1 | bc`
    write_block $count "minus 1 byte" $offset 512 false
    offset=`echo $oneTB \* $count \- $dbsize | bc`
    write_block $count "minus 1FSB" $offset 512 false
    write_block $count "minus 1FSB" $offset 1 false

    # direct IO
    offset=`echo $oneTB \* $count | bc`
    write_block $count "+0" $offset $dbsize true
    offset=`echo $oneTB \* $count \- 1 | bc`
    write_block $count "minus 1FSB" $offset $dbsize true

    echo === Iterating, `expr $upperbound - $count` remains
    echo
    echo
    let count=$count+1
done

# success, all done
status=0
exit