btrfs/003 uses a method to remove the device as part of the test
case, and after the test completes the removed device is added
back to the system. However on certain system, albeit the slow
running system the device comes back a bit later, and so the
latter occurring sub-test with in the btrfs/003 fails.
This patch adds script to wait and test if the device is back online,
and thus report the same to to the full log.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure inodes can be allocated in new space added by xfs_growfs.
Regression test for
xfs: allow inode allocations in post-growfs disk space
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for:
b5b6077 ext4: fix wrong assert in ext4_mb_normalize_request()
Meanwhile make minor changes to _scratch_mkfs_ext4() in common/rc,
_scratch_mkfs_ext4() might fail due to conflicts between being passed options
and MKFS_OPTIONS. We fix this by ignoring MKFS_OPTIONS if it fails the first
time(see _scratch_mkfs_xfs()), as suggested by Lukas Czerner.
[dchinner: converted to use xfs_io]
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently we're checking file system consistency on TEST_DEV after every
successful test run even though the TEST_DEV might not even be used in
that test.
Fix it by introducing _require_test to for the test ti indicate that
it's about to use TEST_DEV.
Also add _require_test to the new script so that this requirement is a
default.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are about 198 tests which requires scratch_dev, but does not check
the file system consistency afterwards. Xfstests infrastructure does not
do it automatically, so fix it by running _check_scratch_fs() after
each test that _require_scratch.
Also remove all the _check_scratch_fs() calls that are not actually needed
and will be covered by the check script.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/317 and generic/318 fail un-gracefully on older kernels
which don't support userns; fix that by running a simple test
as a prerequisite and fail gracefully if needed.
Roll that in with the test for executable presence, and make
a new _require_userns()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Changes in the XFS logging code have lead to small leaks in the log
grant heads that consume log space slowly over time. Such problems have
gone undetected for an unnecessarily long time due to code complexity
and potential for very subtle problems. Losing only a few bytes per
logged item on a reasonably large enough fs (10s of GB) means only the
most continuously stressful workloads will cause a severe enough failure
(deadlock due to log reservation exhaustion) quickly enough to indicate
something is seriously wrong.
Recent changes in XFS export the state of the various log heads through
sysfs to aid in userspace/runtime analysis of the log. This test runs a
workload against an XFS filesystem, quiesces the fs and verifies that
the log reserve and write grant heads have not leaked any space with
respect to the current head of the physical log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Enter max ACL count into common/attr for JFS, with the purpose of
getting JFS to pass xfstests generic/026.
Signed-off-by: Michael L. Semon <mlsemon35@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for the btrfs ioctl clone operation when the source range
contains hole(s) and the FS has the NO_HOLES feature enabled (file holes
don't need file extent items in the btree to represent them).
This issue is fixed by the following linux kernel btrfs patch:
Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So that the same check (btrfs cloner program presence) can be reused
by other tests.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the new config stuff we lost the selinux options being set for systems with
selinux turned on. We want the selinux context set all the time, wether we
provide a MOUNT_OPTIONS value or not, so take this logic out of _mount_opts()
and just put it in the body of common/config
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I don't have flink support in my xfsprogs, but it doesn't fail with "command not
found" or whatever, it fails because I don't have the -T option, whereas Eric
gets an error about $TEST_DIR being a directory because his xfs_io tries to open
the directory first before it parses the options. So fix this by checking flink
with these two cases and don't run if we hit either of them. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
All commands run as $qa_user should use a relative path so that
missing access permissions on $HOME for root don't prevent running
it. This fixes common/233 for me.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
finobt enabled filesystems can generate new repair output. Update
_filter_repair() to ensure specific AG and inode numbers are filtered
from test output.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Free inode btree tests must ensure that the userspace and kernel bits
are compatible. Add a couple checks for the associated support.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If TEST_DEV or SCRATCH_DEV is symlink(mostly a lvm lv), a simple
basename is not enough, symlink should be followed.
This task is common enough, so introduce new helper functions and
replace all readlink calls in
ext4/305
generic/009
generic/019
generic/285
generic/312
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Number of helpers for checking xfs_io functionality is slowly
growing. But it's as easy to simply use _require_xfs_io_command()
directly and just specify the command we want to check. It will also
avoid the need to create helper every time we need to check a new
command in xfs_io.
Remove all the helpers and use _require_xfs_io_command() in the
tests.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Having just removed the largeacl test from the shared ACL test,
reintroduce the same test as an generic test so that we can
handle the different limits in supported ACL count appropriately
across different filesystems and different configurations within
filesystem types.
Filesystems have to add support to _acl_get_max to run
this test - the default behaviour right now is to throw a
notrun error like this:
generic/026 14s ... [not run] ext4 does not define maximum ACL count
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_repair now dumps metadata and CRC corruption information to the
output from the verifier infrastrcuture. Filter this out so that it
doesn't cause spurious test failures such as in xfs/030 and xfs/033.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a helper function to verify fallocate zero range support in a style
similar to _require_xfs_io_falloc_collapse(), etc.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Functions like _mount_opts(), _mkfs_opts() and _fsck_opts() are
defined both in common/rc and common/config while used only in
common/config.
Remove those functions from common/rc and update _mount_opts() to match
the superior version of the function.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfsprogs without crc support won't print crc=0/crc=1, so
_filter_mkfs() leaves _fs_has_crcs variable unset, and xfs/033 fails
because of that.
xfs/033 4s ... - output mismatch (see /root/xfstests/results//xfs/033.out.bad)
--- tests/xfs/033.out 2014-04-16 22:31:49.818350450 -0400
+++ /root/xfstests/results//xfs/033.out.bad 2014-04-16 22:35:08.264401190 -0400
@@ -5,6 +5,7 @@
naming =VERN bsize=XXX
log =LDEV bsize=XXX blocks=XXX
realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+./tests/xfs/033: line 87: [: -eq: unary operator expected
Corrupting root inode - setting bits to 0
Wrote X.XXKb (value 0x0)
Phase 1 - find and verify superblock...
Print _fs_has_crcs=0 to stderr by default, so old xfsprogs could have
this variable set too, and a latter _fs_has_crcs=1 could overwrite it
if the fs does have crc support.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test verifies that after an incremental btrfs send the
replicated file has the same exact hole and data structure as in
the origin filesystem. This didn't use to be the case before the
send stream version 2 - holes were sent as write operations of 0
valued bytes instead of punching holes with the fallocate system
call, and pre-allocated extents were sent as well as write
operations of 0 valued bytes instead of intructions for the
receiver to use the fallocate system call.
It also checks that prealloc extents that lie beyond the file's
size are replicated by an incremental send.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The renameat2() syscall was merged into 3.15-rc (merge commit:
7df934526c0b).
This adds the shared infrastructure for the actual test scripts.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there is a problem with parse_config_section() when the
configuration value contains equality sign like this for example:
MOUNT_OPTIONS="-o data=journal"
the result will be
export MOUNT_OPTIONS="-o data="journal"
which is not going to work. The reason is that the expression used to
parse the configuration options uses greedy matching '.*'. Fix this by
using non greedy expression to match the first equality sign '[^=]'.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Anand Jain
Eryu Guan
Xiaoguang Wang
Lukas Czerner
Eric Sandeen
Brian Foster
Michael L. Semon
Filipe David Borba Manana
Josef Bacik
hch@infradead.org
Dave Chinner
Eric Whitney
Miklos Szeredi