Add config option RECREATE_TEST_DEV to allow to recreate file system on
the TEST_DEV device. Permitted values are true and false.
If RECREATE_TEST_DEV is set to true the TEST_DEV device will be
unmounted and FSTYP file system will be created on it. Afterwards it
will be mounted to TEST_DIR again with the default, or specified mount
options.
Also recreate the file system if FSTYP differs from the previous
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch add support for sections in the config file. Each section can
contain configuration options in the format
OPTION=value
when one section is processed xfstests will proceed to next section
until all secitons are processed, or an error occur.
The name of the section can consist of alphanumeric characters + '_',
nothing else is allowed. Name of the section is also used to create
results subdirectory for each section. After all the sections are
processed summary of all runs is printed out.
If the config file does not contain sections, or we're not using config
file at all, nothing is changed and xfstests will work the same way as
it used to.
This is very useful for testing file system with different options. Here
is an example of the config file with sections:
[ext4_4k_block_size]
TEST_DEV=/dev/sda
TEST_DIR=/mnt/test
SCRATCH_DEV=/dev/sdb
SCRATCH_MNT=/mnt/test1
MKFS_OPTIONS="-q -F -b4096"
FSTYP=ext4
[ext4_1k_block_size]
MKFS_OPTIONS="-q -F -b1024"
[ext4_nojournal]
MKFS_OPTIONS="-q -F -b4096 -O ^has_journal"
[ext4_discard_ssd]
MKFS_OPTIONS="-q -F -b4096"
TEST_DEV=/dev/sdc
SCRATCH_DEV=/dev/sdd
MOUNT_OPTIONS="-o discard"
Note that once the variable is set it remains set across the sections, so
you do not have to specify all the options in all sections. However one
have to make sure that unwanted options are not set from previous
sections.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Added -P option to $DF_PROG and changed the invocation of
'df' command in generic/{251,260,273,275} testcases
with $DF_PROG.
Otherwise the testcases will fail if the scratch
device has a long name (for example, if it's an LVM volume).
Because df outputs its usage stats with two lines:
/dev/mapper/xfstests-disk1
3030800 4608 2868908 1% /tmp/mnt/disk1
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We changed btrfs device add to check and see if there is an existing fs on the
device we are adding, so you now have to do -f if you want to do this. In order
to get around checking to see if we have this version of btrfs-progs just wipefs
the device we're adding to make sure the device add will pass no matter which
version of btrfs-progs you have. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
With coreutils v8.16 the style of apostrophes changed from `word' to
'word'. This is breaking some tests which use the older form.
This commit introduces function changes the golden output of the
affected tests and introduces a filter for the older style output.
[dchinner: modified to use a global filter in check rather than
per-test filters]
[rjohnston: minor comment change]
Signed-off-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test performs btrfs device replace tests with all possible profiles
(single/dup/mixed/raid0/raid1/raid10), one round with the '-r' option
to 'btrfs replace start' and one round without this option. The
cancelation is tested only once and with the dup/single profile for
metadata/data.
This test takes 181 seconds on my SSD equiped test box and 237s on
spinning disks. Almost all the time is spent when the filesystem is
populated with test data. The replace operation itself takes less than
a second for all the tests, except for the test that is marked as
'thorough' which will run for about 8 seconds on my test box.
The amount of tests done depends on the number of devices in the
SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should
be available (e.g. 5 partitions). With less than 2 entries in
SCRATCH_DEV_POOL, the test is not executed.
The source and target devices for the replace operation are arbitrarily
chosen out of SCRATCH_DEV_POOl. Since the target device mustn't be
smaller than the source device, the requirement for this test is that
all devices have _exactly_ the same size. If this is not the case, the
test terminates with _notrun.
To check the filesystems after replacing a device, a scrub run is
performed, a btrfsck run, and finally the filesystem is remounted.
This commit depends on my other commit:
"xfstest: don't remove the two first devices from SCRATCH_DEV_POOL"
[rjohnston: renumbered to btrfs/011]
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Since common/config is executed twice, if SCRATCH_DEV_POOL is configured
via the environment, the current code removes the first device entry twice
which means that you lose the second device for the test.
The fix is to not remove anything from SCRATCH_DEV_POOL anymore.
That used to be done (I can only guess) to allow to pass the
SCRATCH_DEV_POOL as an argument to _scratch_mkfs. Since _scratch_mkfs adds
the SCRATCH_DEV, the pool mustn't contain that device anymore.
A new function _scratch_pool_mkfs is introduced that does the expected
thing.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This commit adds the possibility to specify RESULT_BASE directory from
the config file, or with environment variable. The default remains the
same "$here/results/".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Move configuration initialization into a function so we can re-read it
without the need to reinclude the common/config file which would be
ugly. This is in preparation for adding support for sections into config
files.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Currently we do not export some of the important variables in
common/config. Fix this.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Replace the usage of the script xfs_check and add the relevant code to
xfstests.
This is in preparation of the planned deprecation of xfs_check.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After the re-factor, common.* have been renamed to common/* but there
are several files still look for the old path, fix it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Lukas Czerner
Stanislav Kholmanskikh
Josef Bacik
Tomas Racek
Stefan Behrens
Rich Johnston
Dave Chinner
Chandra Seetharaman
Eryu Guan