This test is based on generic/273, a regression test for commit
9a3a5da xfs: check for stale inode before acquiring iflock on push
On unpatched kernel, rm processes would hang.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test is motivated by an issue found by a btrfs user, addressed
and described by the following Linux kernel patch:
https://patchwork.kernel.org/patch/3046931/
The steps to reproduce the issue on btrfs are the following:
$ mkfs.btrfs -f /dev/loop0
$ mount /dev/loop0 /mnt
$ mkdir /mnt/acl
$ setfacl -d --set u::rwx,g::rwx,o::- /mnt/acl
$ getfacl /mnt/acl
user::rwx
group::rwx
other::r-x
default:user::rwx
default:group::rwx
default:other::---
$ mkdir /mnt/acl/dir1
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
After unmounting and mounting again the filesystem, getfacl returned the
expected default ACL for the subdirectory:
$ umount /mnt/acl
$ mount /dev/loop0 /mnt
$ getfacl /mnt/acl/dir1
user::rwx
group::rwx
other::---
default:user::rwx
default:group::rwx
default:other::---
This means that the underlying ACL xattr was persisted correctly but
the in memory representation of the inode had (incorrectly) a NULL ACL.
[rjohnston: renumbered test to 319]
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After applied this commit (864688d3), xfstests #255 will not test a
file system that cannot support fallocate(2), such as a indirect-based
file in ext4. So we need to add a new generic test case to test it.
The difference between #255 and this test case is only to use pwrite to
allocate blocks. Other filesystems should survive in this test case.
In the mean time, a new argument '-u' is added into _test_generic_punch
not to run unwritten tests.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce generic test 315 to verify if the disk space is
released after truncating a preallocated file back to the
old smaller size. Before Linux-3.10, Btrfs/OCFS2 test
failed in this case.
The test file is fallocated with FALLOC_FL_KEEP_SIZE option.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Tests if subdirectories created on the filesystem will properly inherit sgid bit
when this is set on the parent directory, once the process has the properly
permissions to create a subdirectory, this, should inherit parent's sgid bit if
this is set and irix_sgid_inherit sysctl is disabled.
V2: add missing source of "attr" file for _require_acls
V3: use _ls_l to filter out the selinux "."
renumber to 314 to make the merge easier
V4: fix 314.out to the correct output
Thanks to Sandeen who have written this patch
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Regression test for commit:
3972f26 btrfs: update timestamps on truncate()
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The generic/286 test tests SEEK_HOLE and SEEK_DATA, and is reasonably
fast. We should just run the test by default.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test directory mtime and ctime are updated when moving a file onto an
existing file in the directory
Regression test for commit:
0b23076 ext3: fix update of mtime and ctime on rename
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
On unpatched ext4 if an extent exists which includes the block right
before the maximum file offset, and the block for the maximum file
offset is written, the kernel panics.
On patched ext4, the write would get EFBIG since we lower s_maxbytes
by one fs block.
Regression test for commit:
f17722f ext4: Fix max file size and logical block counting of extent format file
Though it's an ext4 specific issue, it's no harm to run on all file
systems, so put it in generic.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Check if ctime is updated and written to disk after setfacl
Regression test for the following extN commits
c6ac12a ext4: update ctime when changing the file's permission by setfacl
30e2bab ext3: update ctime when changing the file's permission by setfacl
523825b ext2: update ctime when changing the file's permission by setfacl
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Create a specific tests/ subdirectory to hold all the tests so they
are no longer need to be in the top level directory. This patch does
not move any tests there, however, and that will be done in
subsequent commits.
The tests/ subdir will have it's own subdirectories for different
classes of tests. Initially, there will be a per-FSTYP subdirectory
for filesytsem specific tests, and a generic directory for tests
that span multiple filesystems.
Each class will have it's own group file to indicate what groups the
tests belong to, and these will be parsed appropriately by the high
level check script to build the test list.
The change in parsing results in the test output also emitting the
path to the test as well as the name of the test, instead of just a
raw number. This allows duplicate test names in the sudirecotries to
be unambiguous when the summary is written out.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Eryu Guan
Filipe David Borba Manana
Dwight Engen
Zheng Liu
Jie Liu
Carlos Maiolino
Theodore Ts'o
Josef Bacik
Rich Johnston
Zhao Hongjiang
Dave Chinner