We have removed creator/owner info from each test case, remove the
'creator' comment in template too.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test directory mtime and ctime are updated when moving a file onto an
existing file in the directory
Regression test for commit:
0b23076 ext3: fix update of mtime and ctime on rename
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Regression test for commit:
9559996 ext4: remove mb_groups before tearing down the buddy_cache
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
On unpatched ext4 if an extent exists which includes the block right
before the maximum file offset, and the block for the maximum file
offset is written, the kernel panics.
On patched ext4, the write would get EFBIG since we lower s_maxbytes
by one fs block.
Regression test for commit:
f17722f ext4: Fix max file size and logical block counting of extent format file
Though it's an ext4 specific issue, it's no harm to run on all file
systems, so put it in generic.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Check if ctime is updated and written to disk after setfacl
Regression test for the following extN commits
c6ac12a ext4: update ctime when changing the file's permission by setfacl
30e2bab ext3: update ctime when changing the file's permission by setfacl
523825b ext2: update ctime when changing the file's permission by setfacl
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com renumbered test to next in group sequence]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
When setting seqres in the new script, '$' should be escaped,
otherwise seqres will be set to '/' not '$RESULT_DIR/$seq'
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After the re-factor, common.* have been renamed to common/* but there
are several files still look for the old path, fix it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
HOSTOS was used in a test before being initialized and this led to
failed filesystem type detection.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by-by: Rich Johnston <rjohnston@sgi.com>
_require_tape is failing tests when no TAPE_DEV is specified. It
should be using _notrun for these cases rather than trying to open
code the $seqres.notrun magic file manipulations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test 262 uses ${} notation for some variables, and so is resistant
to grep and sed matches. Change it to use the same notation as the
rest of xfstests and fix up the output file redirections made in
previous patches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Only test 050 uses the _qsetup function, and it only uses the ID
part of it in the test. The attempts to link output files is useless
as there are no different output files used by the test.
Hence kill the _qsetup function, and move the code into test 050,
simplifying it down to the minimum needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Some tests 'cd <somedir>' and then direct output to $RESULT_DIR,
which fails if the current working directory is not $here.
Regardless, if an external results directory is to be used it needs
to have a full path specified and the use of $here as the base of
the results files is completely incorrect.
Hence change all the $here/$seqres* references to simply be
$seqres*, and instead encode the full path to the results in
$RESULT_DIR.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
It is definitely handy to be able to disabdle certain tests (e.g. tests that are
known to hang or crash the test machine on certain kernels), so re-introducing
the capability of avoiding certain tests just by placing them in a file is
useful.
Introduce a command line option to specify the expunged file name. The file will
exist in each tests/* sub-directory so that only the testname is required, and
can be managed independently. The use of a command line parameter allows
multiple expunge files to exist simultaneously in the one xfstests tree which
simplifies management of a source repository used for multiple versions of a
distro.
Typical usage:
$ cat tests/generic/3.0-stable-avoid
280
$ sudo ./check -X 3.0-stable-avoid generic/280
FSTYP -- xfs (debug)
PLATFORM -- Linux/x86_64 test-1 3.0.39-dgc+
MKFS_OPTIONS -- -f -bsize=4096 /dev/vdb
MOUNT_OPTIONS -- /dev/vdb /mnt/scratch
generic/280 [expunged]
Passed all 0 tests
$
Eventually we should be able to automate setting up expunged files based on
distro release or kernel version through this infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Currently the callers pass $seq, rather than the full path to the
test. As a result, it creates the link in the top level directory
and it points nowhere. Fix it to create the link in the correct
place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' tests/*/*
will do most of the work automatically.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Currently each test gets it's sequence number from it's name. It
separates this from the path via basename, and uses it for
outputting full, notrun and other status/log files. Hence these end
up in the top level directory.
All these output files need to go somewhere other than the top level
directory. Right now the check script is looking for them in the new
test directories (e.g. for the notrun files), but it would be good
to be able to separate the test source form the test output.
Hence create an output directory which has a similar heirarchy to
the test source directory. Create it on demand when we build the
list of tests to run if it doesn't already exist.
Change the high level check script to set up this variable
appropriately for each test that is being run, and to use this new
output directory for it's result files as well. The next commit will
change all the tests themselves to use the new output directory.
This is the first (small) step in being able to store test results
in an external location for archival/data mining purposes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com rm whitespace and fix typos in commit message]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Now that there are no tests in the top level directory, the exlude
group functionality no longer works (-x group) as it cannot find
tests to build an initial list of tests. Rework the the exclude
group implementation to operate correctly on the new test locations.
Also, switch from sed to grep for exclusion because sed has problems
distnguishing the '/' in path names from regex control...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Now that tests are in separate subdirectories, they cannot be selected purely by
test number on the command line. We need to specify the test by subdir and test
name, so effectively we move to specifying them by regexes on the command line
rather than by expanding a range internally. This is needed to support
non-numeric test names as well, so the change may as well be made here.
This means the command line parsing needs to change from trying to detect tests
by a regex match to a processing loop that simply parses the tests and checks
for there existence. Hence the moment we find an argument that is not a switch
(i.e no preceeding "-"), we move from the arg processing loop to the test name
processing loop. IOWs, tests must be specified last on the command line.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
These are tests that are shared between multiple filesystems (moved
to shared), and udf/btrfs/ext4 specific tests, moved to appropriate
directories.
I created the "shared" directory to indicate tests that are not
truly generic, but also not filesystem specific. They might rely on
a feature that is only implmented in a few filesystems and so can't
be truly generic.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Eryu Guan
Zhao Hongjiang
Rich Johnston
David Sterba
Dave Chinner