This is to detect whether filesystem supports shutdown feature or not.
And let use this into the following xfs tests.
xfs/053 (data exposure)
xfs/137 (data vs filesize)
xfs/138 (data vs filesize vs truncate)
xfs/139 (data vs filesize vs partial truncate)
xfs/140 (data vs filesize vs extending truncate)
xfs/179 (data vs filesize w/ fsync)
xfs/180 (data vs filesize w/ sync)
xfs/182 (data vs filesize w/ recovery)
xfs/200 (recovery vs ro-block device)
xfs/306 (fsstress vs recovery)
xfs/085
xfs/086
xfs/087
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The secondary superblock verification in xfs_repair was subject to a bug
that unnecessarily leads to a brute force superblock scan if the last
superblock in the fs happens to be corrupt. Normally, xfs_repair handles
one-off superblock corruption gracefully using a heuristic that finds
the most consistent superblock content across the set of secondary
superblocks.
Create a regression test for xfs_repair that corrupts the last
superblock in the fs. Verify the superblock is updated from the
previously verified sb content and a brute force scan is not initiated.
In the event of failure, detect that a brute force scan has started and
abort the repair in order to fail the test quickly.
To support the test, extend the xfs_repair filter to handle corrupted
superblock repair output and provide generic test output for arbitrary
AG counts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Adds a new test that checks for correct behaviour of
XFS_IOC_FSSETXATTR for directories: extent sizes should always be
settable on a directory, even if the directory already has allocated
extents.
Signed-off-by: Iustin Pop <iustin@k1024.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
After installing the test suite, src directory only contains binary
programs in the final building directory. Here executing "cp src/itrash.c
$SCRATCH_MNT/${I}" will output "cp: cannot stat 'src/itrash.c': No
such file or directory" error message. Fix it.
Signed-off-by: Xing Gu <gux.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The warnings have been removed when stripe unit/width are too big
for the log stripe unit to be set. Hence add them to the mkfs.xfs
filter and strip them from golden output file so the test succeeds
on both new and old mfks binaries.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This tests xfs_copy, copying all combinations of sector
size and block size possible on the platform running the
test.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The bulkstat mechanism is used by xfsdump and other tools to index all
inodes allocated in a filesystem. Run some simple tests with varying
inode layouts and bulkstat batch sizes to verify bulkstat finds the
expected number of inodes.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Oh my, I did a very bad thing - I wrote a new test to
check for xfsdump regressions, but did not create the
.out file with a known-good kernel.
This matches output from older, stable kernels, and is the
proper expected output. Sorry about that!
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use appropriate environment variable (XFSDUMP_PROG) instead of
hardcoding 'xfsdump' name. Also make the test fail graciously when
xfsdump isn't installed.
We also make XFSDUMP_PROG be equal to empty string instead of -e when
xfsdump isn't installed. The changes require some tweaking to output
filtering since full command path now appears in the output.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test creates a large-ish directory structure using
fsstress, and does a dump/restore to make sure we dump
all the files.
Without the fix for the regression caused by:
c7cb51d xfs: fix error handling at xfs_inumbers
we will see failures like:
-xfsrestore: 486 directories and 1590 entries processed
+xfsrestore: 30 directories and 227 entries processed
as it fails to process all inodes.
I think that existing tests have a much smaller set of files,
and so don't trip the bug.
I don't do a file-by-file comparison here, because for some
reason the diff output gets garbled; this test only checks
that we've dumped & restored the correct number of files.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS buffered I/O writeback has a subtle race condition that leads to
stale data exposure if the filesystem happens to crash after delayed
allocation blocks are converted on disk and before data is written back
to said blocks.
Use file allocation commands to attempt to reproduce a related, but
slightly different variant of this problem. The associated falloc
commands can lead to partial writeback that converts an extent larger
than the range affected by falloc. If the filesystem crashes after the
extent conversion but before all other cached data is written to the
extent, stale data can be exposed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the device name is too long, the output of xfs_quota -c "df" will be
broke into two lines as
Filesystem 1K-blocks Used Available Use% Pathname
/dev/mapper/rhel_hp--dl388eg8--01-testlv2
15718400 32932 15685468 0% /mnt/testarea/scratch
/dev/mapper/rhel_hp--dl388eg8--01-testlv2
512000 0 512000 0% /mnt/testarea/scratch/test
and _filter_quota_rpt() couldn't catch the correct available number and
test will fail as
[root@hp-dl388g8-01 xfstests]# diff -u tests/xfs/262.out /root/xfstests/results//xfs/262.out.bad
--- tests/xfs/262.out 2014-10-08 20:16:19.000000000 +0800
+++ /root/xfstests/results//xfs/262.out.bad 2014-10-09 14:29:38.795813323 +0800
@@ -1,2 +1,4 @@
QA output created by 262
Silence is golden.
+hard limit 0 bytes, expected 524288000
+hard limit 0 bytes, expected 524288000
Update the filter so it could catch the correct value.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Include common/dump into xfs/287 so that the test fails graciously when
xfsdump isn't installed.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit b8cac56 ("xfs/007: add project quota Q_XQUOTARM test") has
been broken since it was added - the new code checked the group
quota inode rather than the project quota inode and so always
reported a pre-RM block count of zero. This occurred due to a copy
and paste of the existing user/group test code and didn't fix up all
the code properly.
Factor the common code into a single function, and pass in the
correct variables the tests require. While there, make sure that we
remove the 007.full file before the test starts to aid future
debugging and also check that project quotas are supported before
trying to test them.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Change all occurrences of stat --format and stat --printf to stat -c
so that the tests work correctly on BusyBox systems.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/200 leaves a dirty log as readonly filesystems don't write
unmount records to mark the log clean.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I'm getting enospc errors on a 4GB test device after a while of
running. Part of the issue is that many tests can't or don't clean
up previous failed runs when they start or if the run to success.
Hence while we want to slowly age the test filesystem, we don't
really want that aging to unintentionally run the filesystem out of
space. To that end:
$ sudo du -s /mnt/test/* | sort -nr |head -10
1929160 /mnt/test/fsfile
512000 /mnt/test/247.8133
512000 /mnt/test/247.4713
512000 /mnt/test/247.4488
466752 /mnt/test/fstest.9850.2
40000 /mnt/test/resv
29804 /mnt/test/fsstress.12144.1
26208 /mnt/test/populate_root
26208 /mnt/test/mnt
23216 /mnt/test/fsstress.4491.1
We can see that there are a few tests that using most of the space.
These are often left behind due to kernel failures during tests or
reboots while tests are in progress, so make sure that they at least
clean up such mess the next time they run.
Test generic/247, xfs/020 (fsfile) and generic/074 (fstest.$$.n)
are the worst offenders, so just target these to being with.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test tries to directly corrupt the CRC field of the primary
superblock by using xfs_io pwrite, but never syncs it to disk,
so it's quite likely that the mount will not see the bad data.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
A buffer use after free race was discovered in the XFS log recovery
codepath if I/O failures occur during recovery. The I/O submission path
can abort the mount and release the only reference held on some buffers
before I/O completion processing (e.g., async workqueue processing)
might have completed. Badness ensues if the I/O completion path
subsequently attempts to access said buffers.
The test manufactures the race by forcing all writes to fail (via
dm-flakey) after a fixed period of time. A delay is inserted into the
mount codepath to synchronize write failures with log recovery.
Credit for discovery of the race and definition of the reproducible test
case goes to Alex Lyakas.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reported-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
_require_xfs_sysfs() currently assumes that all sysfs attributes reside
under a device-specific subdirectory in the XFS sysfs hierarchy. It is
hardcoded to use the TEST_DEV mount and expect the relative attribute
path as a parameter.
Not all sysfs attributes are associated with specific devices or mount
points, however. Remove the hardcoded device name part of the attribute
path from _require_xfs_sysfs() and let the caller construct the relative
path based on the sysfs XFS root directory.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some tests deliberately corrupt scratch devices and so will fail
the post-test check. Add a "_require_scratch_nocheck" helper
function for such tests to avoid false test failure detection.
Also, ensure that _notrun cleans up the trigger for the post-test
checks. Otherwise the next test to run may try to validate the
scratch/test devices even though they are not used by the test.
Further, _check_xfs_filesystem() causes check to exit if it finds a
corruption. This is extremely annoying as it terminates the entire
test run rather than just reporting that the test fails. Hence add
an "iam != check" test before exiting so that calls from tests will
cause the test to fail, but calls from check won't cause the harness
to exit.
There are still some tests that fail the scratch check, these are
not obvious test failures and so need further investigation to
determine the cause of the failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test segfault issue when repairing large xfs.
Regression test for xfsprogs commit
7f2d6b8 xfs_repair: avoid segfault if reporting progress early in repair
The original test is from the commit log, written by Eric Sandeen.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test for project quota Q_XQUOTARM operations, update the
golden output file to match the new test output.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Jaegeuk Kim
Brian Foster
Iustin Pop
Xing Gu
Eryu Guan
Dave Chinner
Eric Sandeen
Jan Kara
Ari Sundholm
Jie Liu