This test performs btrfs device replace tests with all possible profiles
(single/dup/mixed/raid0/raid1/raid10), one round with the '-r' option
to 'btrfs replace start' and one round without this option. The
cancelation is tested only once and with the dup/single profile for
metadata/data.
This test takes 181 seconds on my SSD equiped test box and 237s on
spinning disks. Almost all the time is spent when the filesystem is
populated with test data. The replace operation itself takes less than
a second for all the tests, except for the test that is marked as
'thorough' which will run for about 8 seconds on my test box.
The amount of tests done depends on the number of devices in the
SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should
be available (e.g. 5 partitions). With less than 2 entries in
SCRATCH_DEV_POOL, the test is not executed.
The source and target devices for the replace operation are arbitrarily
chosen out of SCRATCH_DEV_POOl. Since the target device mustn't be
smaller than the source device, the requirement for this test is that
all devices have _exactly_ the same size. If this is not the case, the
test terminates with _notrun.
To check the filesystems after replacing a device, a scrub run is
performed, a btrfsck run, and finally the filesystem is remounted.
This commit depends on my other commit:
"xfstest: don't remove the two first devices from SCRATCH_DEV_POOL"
[rjohnston: renumbered to btrfs/011]
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Since common/config is executed twice, if SCRATCH_DEV_POOL is configured
via the environment, the current code removes the first device entry twice
which means that you lose the second device for the test.
The fix is to not remove anything from SCRATCH_DEV_POOL anymore.
That used to be done (I can only guess) to allow to pass the
SCRATCH_DEV_POOL as an argument to _scratch_mkfs. Since _scratch_mkfs adds
the SCRATCH_DEV, the pool mustn't contain that device anymore.
A new function _scratch_pool_mkfs is introduced that does the expected
thing.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This commit adds the possibility to specify RESULT_BASE directory from
the config file, or with environment variable. The default remains the
same "$here/results/".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Move configuration initialization into a function so we can re-read it
without the need to reinclude the common/config file which would be
ugly. This is in preparation for adding support for sections into config
files.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Currently we do not export some of the important variables in
common/config. Fix this.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Replace the usage of the script xfs_check and add the relevant code to
xfstests.
This is in preparation of the planned deprecation of xfs_check.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After the re-factor, common.* have been renamed to common/* but there
are several files still look for the old path, fix it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Stefan Behrens
Lukas Czerner
Josef Bacik
Rich Johnston
Dave Chinner
Chandra Seetharaman
Eryu Guan