Several tests uses both _filter_test_dir and _filter_scratch
concatenated by pipe to filter $TEST_DIR and $SCRATCH_MNT. However,
this would fail if the shorter string is a substring of the other
(like "/mnt" and "/mnt2").
This patch introduces new common filter function to safely call both
_filter_test_dir and _filter_scratch, and update tests and functions
to use this new function.
I checked this with btrfs/029, generic/409,410,411, and
generic/381,383, xfs/106,108 (which calls _filter_quota). Thanks
Eryu for advice.
[eguan: folded 2nd patch into 1st patch and update commit log a bit]
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is obviously wrong and makes ./check -r skip over tests on ext4
with "ext4 on $DEV not configured with metadata journaling".
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
I catch this following error from dmesg when this testcase fails.
[17446.661127] Buffer I/O error on dev sdb1, logical block 64, async page read
We expect to inject disk IO errors on the device when xfs_io reads
the specific file, but other processes may trigger IO error earlier.
So, we can use task-filter to solve this problem.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that an incremental send/receive operation will not fail when the
destination filesystem has compression enabled and the source filesystem
has a 4K extent at a file offset 0 that is not compressed and that is
shared.
This currently fails on btrfs and is fixed by the following patch for the
linux kernel:
"Btrfs: incremental send, fix emission of invalid clone operations"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that a direct IO write works against raid5/6 filesystems and that
after the write operation we are able to read back the correct data
and scrub operations don't find any errors.
This test is motivated by a regression introduced in the merge window
for the 4.13 linux kernel, which was undetected by the current set of
test cases. The issue is fixed by the following patch:
"Btrfs: fix write corruption due to bio cloning on raid5/6"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The option parser only accept options before non-option argument.
Although David Sterba has submitted commit df8c7225ba ("btrfs:
reorder arguments so that options come first"), but this case seems
to be left out.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that an incremental send/receive operation works correctly after
moving some directory inode A, renaming a regular file inode B into the
old name of inode A and finally creating a new hard link for inode B at
directory inode A.
This issue is fixed by the following patch for the linux kernel:
"Btrfs: incremental send, fix invalid path for link commands"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
For btrfs, we can test how it reports data writeback errors on fsync by
implementing a suggestion from Chris Mason:
Build a filesystem with 2 devices that stripes the data across
both devices, but mirrors metadata across both. Then, make one
of the devices fail and test what it does.
[eguan: add comments about creating btrfs with "-d raid0 -m raid1"]
Cc: Chris Mason <clm@fb.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that an incremental send works if we rename some directory inode A
and then rename some file inode B to the name inode A had, for the case
where the directory inode A is an ancestor of inode B in the parent
snapshot.
This issue is fixed by the following patch for the linux kernel:
"Btrfs: incremental send, fix invalid path for unlink commands"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that an incremental send operation works correctly when an inode A
is renamed, a new hard link added to it and some other inode B is renamed
to the old name of inode A.
The btrfs bug is fixed by the following patch for the linux kernel:
"Btrfs: send, fix invalid path after renaming and linking file"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is a regression test for patch "Btrfs: fix delalloc accounting
leak caused by u32 overflow". It creates a bunch of delalloc extents
and merges them together to make sure the accounting is done right.
[eguan: use $XFS_IO_PROG instead of xfs_io]
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is to test whether buffered read retry-repair code is able to
work in raid1 case as expected.
Please note that without checksum, btrfs doesn't know if the data
used to repair is correct, so repair is more of resync which makes
sure that both of the copy has the same content.
Commit 20a7db8ab3f2 ("btrfs: add dummy callback for
readpage_io_failed and drop checks") introduced the regression.
The upstream fix is commit 9d0d1c8b1c9d ("Btrfs: bring back repair
during read")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized
blocks") introduced this regression. It'd cause 'Segmentation
fault' error.
The upstream fix is commit 97bf5a5589aa ("Btrfs: fix segment fault
when doing dio read")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This case tests whether buffered read can repair the bad copy if we
have a good copy.
Commit 20a7db8ab3f2 ("btrfs: add dummy callback for readpage_io_failed
and drop checks") introduced the regression.
The upstream fix is commit 9d0d1c8b1c9d ("Btrfs: bring back repair
during read")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This case tests whether dio read can repair the bad copy if we have
a good copy.
Commit 2dabb3248453 ("Btrfs: Direct I/O read: Work on sectorsized
blocks") introduced the regression.
The upstream fix is commit 2e949b0a5592 ("Btrfs: fix invalid
dereference in btrfs_retry_endio")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We were declaring local arrays using a notation that does not seem to be
standard resulting in failures on some systems, like for example in a
Debian Stretch installation with bash version 4.4.11(1)-release:
$ ./check btrfs/003 btrfs/027
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 debian3 4.10.0-rc8-btrfs-next-37+
MKFS_OPTIONS -- /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /home/fdmanana/btrfs-tests/scratch_1
btrfs/003 45s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/003.out.bad)
--- tests/btrfs/003.out 2016-08-23 10:17:35.027012095 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/003.out.bad 2017-04-21 15:53:58.807366940 +0100
@@ -1,2 +1,4 @@
QA output created by 003
-Silence is golden
+./tests/btrfs/003: line 102: devs[]: bad array subscript
+dev balance failed
+(see /home/fdmanana/git/hub/xfstests/results//btrfs/003.full for details)
...
(Run 'diff -u tests/btrfs/003.out /home/fdmanana/git/hub/xfstests/results//btrfs/003.out.bad' to see the entire diff)
btrfs/027 7s ... [failed, exit status 1] - output mismatch (see /home/fdmanana/git/hub/xfstests/results//btrfs/027.out.bad)
--- tests/btrfs/027.out 2016-08-23 10:17:35.035012077 +0100
+++ /home/fdmanana/git/hub/xfstests/results//btrfs/027.out.bad 2017-04-21 15:53:59.835367271 +0100
@@ -1,2 +1,7 @@
QA output created by 027
Silence is golden
+./common/rc: line 935: devs[]: bad array subscript
+./common/rc: line 893: devs[]: bad array subscript
+mkfs -m raid1 -d raid1 failed
+Bug: str empty, must call _spare_dev_get before its put
+(see /home/fdmanana/git/hub/xfstests/results//btrfs/027.full for details)
...
(Run 'diff -u tests/btrfs/027.out /home/fdmanana/git/hub/xfstests/results//btrfs/027.out.bad' to see the entire diff)
Ran: btrfs/003 btrfs/027
Failures: btrfs/003 btrfs/027
Failed 2 of 2 tests
So fix this by changing the declaration pattern "local dev[]=..." to the
standard way of "local -a dev=...".
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Since snapshot aware defrag has been disabled in kernel, and we all
have learned to ignore the failure of btrfs/010, lets just remove
it.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Update the remaining calls to 'btrfs' that use shortened command
names. Use of full names is recommended to avoid any ambiguities.
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The option parser in the btrfs utility is going to be updated and
will accept arguments in a stricter form, namely that options must
come before their non-option argument. Otherwise eg. the -f option
in send would be understood as another path and not an option
leading to many test failures.
The canonical form should be:
btrfs command subcommand [-options] [arguments]
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
If we create and delete files within the qgroup limits, qg->reserved
(allocations before commits) over-inflates and causes -EDQUOT to be
returned pre-maturely.
Also, 32/64bit data-type exchanges can cause reserved (u64) to go
negative (very large) and -EDQUOT is returned pre-maturely.
Will be fixed by patches with subjects:
btrfs: Retry after commit on getting EDQUOT
btrfs: Change qgroup_meta_rsv to 64bit
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is a regression test for "Btrfs: fix btrfs_decompress_buf2page()".
It fails for zlib on v4.10-rc[1-7].
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Test that both a full and incremental btrfs send operation preserves
file holes.
This used to fail when the filesystem had the NO_HOLES feature enabled,
that is, when the test is run with MKFS_OPTIONS="-O no-holes".
This is fixed by the following patch for the linux kernel:
"Btrfs: incremental send, fix unnecessary hole writes for sparse files"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
/dev/urandom is incompressible and, /dev/zero is highly compressible,
so both are less effective in testing the compress code logic in btrfs.
This patch introduces a text data generator
cat /dev/urandom | od
to populate the files where /dev/urandom is currently being used in the
btrfs test cases.
And updates the _populate_fs() with a new option -c, so to instruct
to use the compressible data to populate the file(s).
[eguan: add comments, fix indention]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>