This test failed for me with output from 'btrfs balance':
QA output created by 003
+Done, had to relocate 4 out of 4 chunks
+Done, had to relocate 5 out of 5 chunks
Silence is golden
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We were allowing users to delete their default subvolume, which is problematic.
This test is a regression test to make sure we don't let that happen in the
future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston: renumbered test from 003 to 009]
This is a regression test for a problem we had where we'd assume we had created
a directory if it only had subvols inside of it. This was happening because
subvols would have lower inode numbers than our current send progress because
their inode numbers are based off of a different counter. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston: renumbered test from 002 to 008]
Basic send / receive functionality test for btrfs. Requires current
version of fsstress built (-x support). Relies on fssum tool but can
skip the test if it failed to build.
Signed-off-by: Jan Schmidt <list.xfs@jan-o-sch.net>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston: renumbered test from 316 to 007]
Current numbering is inheried from the single testsuite series. There
are only 6 btrfs-specific tests and it makes more sense to start adding
new ones at a more natural place than 300-something. There's no overlap
with the old and new numbers and I hope there' will be no confusion when
referencing them.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Now in tests/ there are some test cases whose mode is 0644. But they
should be 0755. So fix it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Dave Chinner <david@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
test 284 had... some issues.
First, it took so long nobody ran it; so shorten the extent
count by a factor of about 100.
Having fixed that, we see failures in 2 cases; when start or
len is -1, but the golden output file didn't have error
output, as if they should pass.
I'm going to argue that these *should* both fail; start = -1
has no real meaning. length = -1 might mean "the rest
of the file" but if that's what you really want, just
don't specify -l.
So add failure output for those cases.
Send all command output to $seq.full, in case that changes
in the future; just capture the return value.
Then remove the return value echo on failure (50?) because
who knows when that might change to some other magic value.
Ok, then when defrag actually works, old defrag returned
"20" (because?) but a recent commit changed it to 0.
So accommodate that too.
And remove a stray "HAVE_DEFRAG=1" while we're at it.
That variable is never used.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Tests after 276 were failing because the background fsstress
hadn't quit prior to exit, devices couldn't be unmounted, etc.
Just use the same trick as generic/068 does, and use
a tmpfile to control whether the background loop keeps
running.
Also, no need to umount scratch at cleanup time, the scripts
do that for us.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Schmidt list.xfs@jan-o-sch.net
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
xfstests have some change on the organization of the testcases
and common* files:
* The common* scripts have been reorganized into the common/ dir.
* The testcases have been reorganized into sub test dirs under tests/.
* The run.* scripts have been removed.
This patch uses the simple way to make install support above changes:
Make up one Makefile for each newly created subdirs, which can control
'make install' separately.
v2 introduces the following changes compared with v1:
* Ignore the file 'group' under the top dir, for it's useless in the new
structures.
* Remove the redundant comments in the Makefiles.
* Use XXX_DIR instead of XXX_SUBDIR in the Makefiles under common/ and tests/.
* Export TESTS_DIR in teh top level Makefile instead of tests/Makefile.
* Obtain the names of dirs for testcases by iterating sub dirs under /tests,
not by enumeration in tests/Makefile.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com Minor modification to Makefile]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' tests/*/*
will do most of the work automatically.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
These are tests that are shared between multiple filesystems (moved
to shared), and udf/btrfs/ext4 specific tests, moved to appropriate
directories.
I created the "shared" directory to indicate tests that are not
truly generic, but also not filesystem specific. They might rely on
a feature that is only implmented in a few filesystems and so can't
be truly generic.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Stefan Behrens
Josef Bacik
Jan Schmidt
David Sterba
Zheng Liu
Eric Sandeen
Wang Sheng-Hui
Rich Johnston
Dave Chinner