The purpose of OVL_BASE_FSTYP is to store the value of FSTYP that is
found in a host config file section.
When there is no host config file or if user sets FSTYP=overlay in config
file, it makes no sense to store the value "overlay" in OVL_BASE_FSTYP
and it is better to leave it empty or leave its current value in tact.
This allows user to set OVL_BASE_FSTYP in config file or before running
the test to support queries about base fs, such as
_require_metadata_journaling, even when running an overlay test.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
When getfattr dumps values of all extended attributes (-d option),
it doesn't print empty extended attributes. e.g: user.name. But from
attr-2.4.48 this behavior is changed, new getfattr prints
user.name="".
The {=""} will break the golden image, so filter the redundant =""
at the end if it has.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This bug is exposed by populating a high level qgroup, and then make
it childless with old qgroup numbers, and finally do rescan.
Normally rescan should zero out all qgroups' accounting number, but
due to a kernel bug which won't mark childless qgroups dirty, their
on-disk data is never updated, thus old numbers remain and cause
qgroup corruption.
Fixed by the following kernel patch:
"btrfs: qgroup: Dirty all qgroups before rescan"
[Eryu: removed useless _filter_xfs_io]
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Filter out quota regeneration messages from xfs_repair when we check
the filesystem, because the xfs tests that encode xfs_repair output
in the golden output will fail when quotas are enabled and the
xfs_repair quota messages appear.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
xfs/001 fuzzes various extent fields using xfs_db. There's nothing
in it that's specific to v4 filesystems, so upgrade the test to be
able to handle v5 filesystems.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The xfs_repair "-t" option shouldn't be used alone. An interval must
follow the -t option, or xfs_repair will report errors. And only
modify reporting interval is useless, if we don't enable ag_stride.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Fuzz every field of every structure and then try to write the
filesystem, to see how many of these writes can crash the kernel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Duperemove is a tool for finding duplicated extents and submitting
them for deduplication, and it supports XFS. This case trys to
verify the integrity of XFS after running duperemove.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Move get_sfdir_prefix function from xfs/278 to commom/xfs
and rename it to _scratch_get_sfdir_prefix so it can be
used in other xfs tests.
This commit also changes xfs/278 to make use of
_scratch_get_sfdir_prefix instead previous one.
Signed-off-by: Marco Benatto <mbenatto@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Since btrfs-dump-tree has been removed from btrfs-progs, use btrfs
inspect-internal dump-tree instead of btrfs-dump-tree.
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
A dmesg output as below cause all cases fail:
[ 508.002072] EDAC DEBUG: ie31200_check: MC0
Due to it matches `egrep -e "BUG:"` in _check_dmesg. But it's not a
real BUG output, so use "\bBUG:" to avoid this mistake.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
These have been scripted conversions then cleaned up by hand as
there was no consistency to the formatting of the license headers in
the common/ directory. Author information was also removed (it's in
the git history) and so now the header format is consistently:
##/bin/bash
# SPDX-License-Identifier: GPL-2.0(+)
# Copyright (c) <date> <owner>. All Rights Reserved.
#
# <file description>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Make sure that all of our commands that can print geometry
information all print the /same/ information.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Abstract calls to xfs_info into $XFS_INFO_PROG like we do for all
other xfs utilities.
[Eryu: require xfs_info to be present if FSTYP is xfs]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Commit ea7ad43 ("fstests: implement require of multiple overlayfs
features") changed the message when tests are not run due to missing
overlayfs feature.
Restore the check for existing module param before trying to mount
which restores the old message format, e.g.:
[not run] feature 'metacopy' not supported by overlay
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
From the feedback of cifs developer, the behaviour of atime/noatime
for cifs is basically noatime always. So the atime related mount
options have no effect on cifs mounts. And Skip these tests on CIFS.
Signed-off-by: xiaoli feng <xifeng@redhat.com>
Acked-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Currently, xfs_io scrub command doesn't allow the probe function
to have any parameter, so we remove the invalid parameter.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Currently a test appears to pass even if it leaves a corrupt
filesystem behind, or a splat in the system logs that should not be
there. While the test is internally tracked as failed (and the
summary reports it as failed) the per-test output exits with a
success and so emits a completion time before the post-test checks
are run by the test harness. Rework the check code to report
post-test check failures as specific test failures rather than as
separate failure line items in the overall harness output.
Reworking where we emit the errors this also allows us to include
the post-test filesystem checking in the test runtime. This is
currently not accounted to the test and can be substantial. Hence
the real elapsed time of each test is not accurately reflected in
the time stats being reported and so regressions in filesystem
checking performance go unnoticed.
Changing the output reporting requires a complete reworking of the
main test check loop. It's a bunch of spaghetti at the moment
because it has post test reporting code at the end of the loop which
must run regardless of the test result. By moving the post test
reporting to the start of the next loop iteration, we can clean up
the code substantially by using continue directives where
appropriate.
Also, for cases where we haven't run the test or it's already been
marked as failed, don't bother running the filesystem/dmesg checks
for failure as we're already going to report the test as failed.
This touches almost all of the loop, so get rid of the remaining
4 space indents inside the loop while moving all this code around.
[Eryu: fixed wrong test seq name issue in xUnit report when test hit
"continue" in the check loop, e.g. notrun, with Dave ACKing the fix]
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Test for overflow of s_inodes_count during filesystem resizing.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Ext4 will want to use dmhugedisk infrastructure for testing resize
bugs. Ext4 fs images are rather sparse (especially with smaller
block sizes) so the current chunk size of 512 sectors leads to large
space consumption. Allow test to specify chunk size.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Currently 'new' script sources common/config which tries to find
mkfs and fails if not found (which is likely for non-root user).
This is inconvenient as development usually does not happen as root.
In fact the vast majority of setup in common/config and common/rc is
not necessary for 'new'. Split out the necessary bits into new
common/test_names and use it in 'new'. Cleanup common/rc and
common/config now that they're only used from 'check' and 'setup'.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
It's just a one line wrapper that adds complexity, remove it. Move
the couple of calls in tests to common/config, but leave the xfsdump
setup in place and just convert it.
[Eryu: add the missing CHECKBASHISMS_PROG definition, define
mkfs.btrfs and mkfs.f2fs with set_mkfs_prog_path_with_opts]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Amir Goldstein
Zorro Lang
Qu Wenruo
Darrick J. Wong
Xiao Yang
Marco Benatto
Lu Fengqi
Dave Chinner
xiaoli feng
Vivek Goyal
Anand Jain
Jan Kara
Dave Chinner