On XFS, the only reliable way to clean out speculative post-eof
preallocations, delayed allocations, and speculative cow preallocations
is to cycle the filesystem mount. Since we're comparing the post-test
quota counts against a freshly quotacheck to look for leaks, it's fine
to cycle the mount. This eliminates sporadic quota count failures when
running xfstests with quotas enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
In _require_prjquota(), let's check project quota support as below
for f2fs:
- For image support, check 'project_quota' on enabled feature list
of specified device.
- For kernel support, check /sys/fs/f2fs/features/project_quota
sysfs entry status.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
These have been scripted conversions then cleaned up by hand as
there was no consistency to the formatting of the license headers in
the common/ directory. Author information was also removed (it's in
the git history) and so now the header format is consistently:
##/bin/bash
# SPDX-License-Identifier: GPL-2.0(+)
# Copyright (c) <date> <owner>. All Rights Reserved.
#
# <file description>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
The golden image of some cases (e.g: generic/305 generic/326
generic/327 generic/328 xfs/214 xfs/330 and xfs/440) depend on the
output of repquota() function.
When it reports multi-users, we can't control the order of lines,
then always hit failures likes:
...
Create the original files
-root 3072 0 0
nobody 0 0 0
fsgqa 0 0 0
+root 3072 0 0
...
So sort the lines to make sure it won't break the golden image.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
_qmount_options didn't properly replace ext[34] journalled quotas
mount options. As such the mount option string got garbled and the
test (e.g. generic/379) failed.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Project quota can work for ext2 & ext3 the same way as for ext4.
Handle them properly as currently the tests just fail because of
unknown prjquota mount option. After this patch, tests will be "not
run" because ext4 driver refuses to use project quota mount options
for "old" fs types.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Previously _scratch_mount didn't check the mount status and most
tests continue to run even if the mount failed (unless test checks
for the mount status explicitly). This would result in running tests
on the underlying filesystem (usually rootfs) and implicit test
failures, and such failures can be annoying and are usually hard to
debug.
Now _fail test by default if _scratch_mount failed and introduce
_try_scratch_mount for tests that need to check mount results
themselves.
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Occasionally speculative preallocation kicks in when writing files
to a filesystem under test. These preallocations consume quota and
/usually/ aren't around after we drop_caches, but there's nothing to
guarantee that they actually have, so the quota reports will be
different before and after the fs remount, causing sporadic test
failures in generic/{23[123],270}.
We now have xfs_spaceman which can instruct XFS to forcibly remove
the speculative preallocations. This fixes the sporadic failures,
at least for XFS.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In _scratch_enable_pquota, use _notrun if the file system with project
quotas enable can't be mounted, since that indicates the kernel
doesn't support that feature.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
SELINUX_MOUNT_OPTIONS is already set in common/config. Setting it again
in common/quota is not necessary. Nor is SELINUX_MOUNT_OPTIONS specific
to quota tests, so common/quota is not the right place for it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Fix the reflink quota tests to su to the fsgqa user so that we actually
test enforcement of quotas. Seems that XFS enforces user quotas even
if root is writing to a user file, whereas everything else lets root
writes through. Also clean up some of the variable usage and
_require_user.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Add a helper to determine if the kernel supports
the GETNEXTQUOTA quotactl.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
There are a a few things about ocfs2 tools that need special-casing in
xfstests, so fix them so that we can start testing ocfs2.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Convert those few remaining call sites to use the XFS_IO_PROG env var.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This patch makes some xfs project quota tests generic,
so that there is at least some coverage on ext4 for this
(semi-)new feature.
It requires bleeding edge xfsprogs, so that xfs_quota and
xfs_io's chproj command can operate on "foreign" filesystems,
and requires relatively new e2fsprogs to enable the project
quota feature on-disk.
The mechanism for enabling project quota on ext4 is a bit
arcane, but hopefully I've encapsulated it reasonably well here.
Changes:
* look for "project" feature in _require_prjquota
* look for accounting not enforcement (-P) in _require_prjquota
* add a _scratch_enable_pquota to turn on project quota feature
* s/pquota/quota/ in _qmount_option for ext4
* add helper to test for xfs_io chproj on foreign filesystems
* switch from block to inode quota in xfs/133 because empty
ext4 dirs consume one block
* cosmetic/generic changes for mkfs, require tests, etc.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Fix several xfs quota tests to work on non-xfs filesystems.
New _require function to be sure that the xfs_quota tool can operate
on foreign filesystems; if it can, and if it needs to, it adds "-f"
to the XFS_QUOTA_PROG variable.
Modify _qmount to do quotacheck/quotaon to mount and /enable/
quota. On xfs this isn't needed and/or fails; it's ignored.
All quota-related options used as arguments to _qmount are changed
from i.e. uquota to i.e. usrquota; the latter is standard across
almost all linux filesytems, including xfs.
xfs/260 filters out the root/default quota line, because ext4
consumes a different amount of space than xfs, and it's not what
we're testing for, so just ignore it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
_qmount_option() did not properly filter the
"prjquota" mount option along with the "pquota"
variant, as it does for the other types.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Replace every explicit mount/umount of scratch or test devices with
helper functions. This allows the next patch to add in hooks to these
functions in order to set up & tear down overlayfs on every mount/umount
(also adds _test_unmount(), which didn't exist prior)
[Eryu Guan rebased the patch agains latest master and replaced more
mount/umount with helpers]
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Per the Advanced Bash Scripting Guide:
"The -n test requires that the string be quoted within the test brackets.
Using an unquoted string with ! -z, or even just the unquoted string
alone within test bracket normally works, however, this is an unsafe
practice. Always quote a tested string."
And indeed:
$ unset FOOBAR
$ [ -n $FOOBAR ] || echo nope
$ [ -n "$FOOBAR" ] || echo nope
nope
Ran into this on a box w/o the attr program installed, and passed
_require_attrs. Quoting the string fixes this; fix it there
and other occurrences in common/* as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use generic quota tools with gfs2.
Fixes "xfs_quota: cannot setup path for mount /mnt/scratch: No such
device or address"
Signed-off-by: Andrew Price <anprice@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Realtime XFS filesystems do not support quotas, so quota tests
always fail on such filesystems. Add a check to _require_quota to
detect this situation and notrun the quota tests...
Also, fix _require_xfs_quota and _require_prjquota to have the same
checks.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Only test 050 uses the _qsetup function, and it only uses the ID
part of it in the test. The attempts to link output files is useless
as there are no different output files used by the test.
Hence kill the _qsetup function, and move the code into test 050,
simplifying it down to the minimum needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Some tests 'cd <somedir>' and then direct output to $RESULT_DIR,
which fails if the current working directory is not $here.
Regardless, if an external results directory is to be used it needs
to have a full path specified and the use of $here as the base of
the results files is completely incorrect.
Hence change all the $here/$seqres* references to simply be
$seqres*, and instead encode the full path to the results in
$RESULT_DIR.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Darrick J. Wong
Chao Yu
Dave Chinner
Zorro Lang
Jan Kara
Eryu Guan
Theodore Ts'o
Eric Biggers
Eric Sandeen
Amir Goldstein
Eric Sandeen
Eric Sandeen
Andrew Price