Overlayfs whiteout can be visible if underlying upper fs does not
support d_type. Kernel commit
45aebea (ovl: Ensure upper filesystem supports d_type)
prevents mounting overlayfs like this since v4.6-rc1.
Check upper fs before mounting overlay, mark as not run if needs.
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Once a while, overlayfs whiteout can be visible if upper fs
does not support d_type(ftype/filetype). Test as a sanity
check on whiteout of regular files, links, dirs, devices
and pipes.
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Fairly trivial test to use the dm-thin infrastructure.
Right now it exhausts space in queue-on-error mode,
adds more space, does a bit more IO, then unmounts &
checks the fs.
Not sure if that's valid to test, but it works here and
demonstrates the common/dmthin helpers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Basic dm-thinp helpers to set up, tear down, grow, check,
and set no-space behavior for a single thin dm volume built
on $SCRATCH_DEV.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Although the test waits for running subshells after sending SIGTERM
signal to them, it does not wait for subprocesses of those subshells
properly. Thus we can hit EBUSY errors when umount is called. Make
subshells wait for executed subprocesses when receiving SIGTERM to avoid
the problem.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test which spawns two processes both writing one file via mmap.
Then to the test when processes first prefault the file by reading it
via mmap. This is mainly interesting to uncover races in DAX fault
handling.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test which spawns two threads both writing one file via mmap which
has been previously prefaulted by reading. Do the same test when one
thread accesses the file via mmap and the other one via normal write.
This is mainly interesting to uncover races in DAX fault handling and
between DAX fault handling and write path.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test which spawns two threads one writing to file via normal write
and one via mmap and checks the result. This is mainly interesting to
uncover races between DAX fault handling and write path.
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently holetest program uses both posix_fallocate(3) and fallocate(3)
to setup the file. However this unnecessarily prolongs the test run and
doesn't really bring any additional code coverage. So remove the
fallocate(3) pass as using posix_fallocate(3) allows us to make the test
easily runnable even for filesystems not supporting that (such as ext2).
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
_scratch_ext4_populate and _scratch_xfs_populate try to create
devices directory in xfstests/, so if we run xfs/083 or ext4/006
twice, it'll fail, fix this issue.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that an invalid parent qgroup does not cause snapshot create to
force the FS readonly.
In btrfs, create_pending_snapshot() will go readonly on _any_ error return
from
btrfs_qgroup_inherit(). If qgroups are enabled, a user can crash their fs by
just making a snapshot and asking it to inherit from an invalid qgroup.
This patch does exactly that test. If the FS goes readonly that will be
reported and we will know that a regression was introduced.
The btrfs fix this patch relates to can be found at the following url:
http://thread.gmane.org/gmane.comp.file-systems.btrfs/54755
Thanks,
--Mark
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In xfs/299, project IDs are in $tmp.projid file. But there's one
line code try to use $temp.projid. Fortunately, it doesn't bring
any problems until now, but if keep using $temp.projid it really
don't make sense.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently xfs/259 tests against TEST_DIR for CRC support status to
decide whether 512 block size should be tested, which is wrong for this
test, because configuration of TEST_DIR is not controlled by test
harness and can be different to the configuration being used in the
test.
Fix it by reversing the block size order that's tested and capture the
output of the actual mkfs command that is being tested, and determine if
512 byte block sizes should be tested based on that output.
While we're at it, I think the test matrix can be enlarged as well, 4k,
2k, 1k and 512 block size can be tested in each fs size boundary, not
only the minimum block size.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Now that we're wiring up fallocate's PUNCH_HOLE and ZERO_RANGE
features for block devices, add some tests to make sure they
work correctly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If run btrfs/091 with "-o compress=lzo" mount option, test case will
fail, as compress makes extent much smaller on disk, making output
different from golden output.
As this test case is only testing qgroup, not compression, disable
compression manually in test case.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Recently added 450d833 (generic/338: Add mmap race test) added a new
binary, it should be added to .gitignore as well.
Signed-off-by: Omer Zilberberg <omzg@plexistor.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that if we create a hard link for a file F in some directory A,
then move some directory or file B from its parent directory C into
directory A, fsync file F, power fail and mount the filesystem, the
directory/file B is located only at directory A and both links for
file F exist.
This test is motivated by an issue found in btrfs which is fixed by the
following patch for the linux kernel:
Btrfs: fix for incorrect directory entries after fsync log replay
Tested against ext3/4, xfs, reiserfs and f2fs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The space occupied by files in the 'origin' directory is calculated with
the assumption that 4k is the block size of the underlying filesystem.
This causes the test to fail with ENOSPC errors when running on
filesystems with larger block sizes. To fix the issue, this commit makes
use of the the block size obtained from the mounted filesystem.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Running a git clean on a xfstests tree causes it to remove the
config files for the given host. Make git ignore custom config
files in this directory so git clean won't completely trash the
local config needed to run xfstests.
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the most recent quota tools package, with the new project quota
support, quotaon -p prints an extra line which generic/082.out isn't
expecting. So filter it out.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There were a number of tests that use Direct I/O that weren't testing
to make sure O_DIRECT is actually supported. This will be important
for avoiding false positives when testing ext4 encryption (which does
not support DIO for obvious reasons).
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If f2fs gets inline_xattr, it enlarges the whole xattr space, which also enables
to cover more acl entries up to 531 from 506.
This patch detects the mount option, inline_xattr, and changes the result of
_acl_get_max for generic/026.
Fixes: 9f7bf79d0c ("attr: add maximum acl count for f2fs")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 31f48569c3 ("xfs/030: fix output on newer filesystems") added
more lines to .out file to match the output from XFS with reflink
support, but it broke test on older XFS.
Dave explained the reason and pointed out the correct way to fix it, so
I just quote Dave's mail here:
"The problem here is that reflink triggers a change in the initial
population of the AGFL - from 4 blocks to 6 blocks, and so repair warns
6 times instead of 4. After filtering, that gives 6 indentical output
lines instead of 4.
Doing something as simple as collapsing repeated identical lines (e.g
filtering through uniq) will work for all filesystem formats and any
future changes that modify the initial AGFL population."
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that if we rename a file, create a new file that has the old name
of the other file and is a child of the same parent directory, fsync the
new inode, power fail and mount the filesystem, we do not lose the first
file and that file has the name it was renamed to.
This test is motivated by an issue found in btrfs which is fixed by the
following patch for the linux kernel:
"Btrfs: fix file loss caused by fsync after rename and new inode"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test that if we rename a directory, create a new file or directory that
has the old name of our former directory and is a child of the same
parent directory, fsync the new inode, power fail and mount the
filesystem, we see our first directory with the new name and no files
under it were lost.
This test is motivated by an issue found in btrfs which is fixed by the
following patch for the linux kernel:
"Btrfs: fix file loss caused by fsync after rename and new inode"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Xiong Zhou
Eric Sandeen
Jan Kara
Xiaoguang Wang
Mark Fasheh
Zorro Lang
Eryu Guan
Darrick J. Wong
Qu Wenruo
Omer Zilberberg
Filipe Manana
Chandan Rajendra
Dave Chinner
Theodore Ts'o
Jaegeuk Kim