Some tests deliberately corrupt scratch devices and so will fail
the post-test check. Add a "_require_scratch_nocheck" helper
function for such tests to avoid false test failure detection.
Also, ensure that _notrun cleans up the trigger for the post-test
checks. Otherwise the next test to run may try to validate the
scratch/test devices even though they are not used by the test.
Further, _check_xfs_filesystem() causes check to exit if it finds a
corruption. This is extremely annoying as it terminates the entire
test run rather than just reporting that the test fails. Hence add
an "iam != check" test before exiting so that calls from tests will
cause the test to fail, but calls from check won't cause the harness
to exit.
There are still some tests that fail the scratch check, these are
not obvious test failures and so need further investigation to
determine the cause of the failures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The test case btrfs/049 is relevant to send stream version 2, and
needs kernel patches as well. So call _notrun if there isn't
matching kernel support as shown below
btrfs/047 [not run] Missing btrfs kernel patch for send stream version 2, skipped this test
Not run: btrfs/047
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
btrfs/003 uses a method to remove the device as part of the test
case, and after the test completes the removed device is added
back to the system. However on certain system, albeit the slow
running system the device comes back a bit later, and so the
latter occurring sub-test with in the btrfs/003 fails.
This patch adds script to wait and test if the device is back online,
and thus report the same to to the full log.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Make sure inodes can be allocated in new space added by xfs_growfs.
Regression test for
xfs: allow inode allocations in post-growfs disk space
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for:
b5b6077 ext4: fix wrong assert in ext4_mb_normalize_request()
Meanwhile make minor changes to _scratch_mkfs_ext4() in common/rc,
_scratch_mkfs_ext4() might fail due to conflicts between being passed options
and MKFS_OPTIONS. We fix this by ignoring MKFS_OPTIONS if it fails the first
time(see _scratch_mkfs_xfs()), as suggested by Lukas Czerner.
[dchinner: converted to use xfs_io]
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently we're checking file system consistency on TEST_DEV after every
successful test run even though the TEST_DEV might not even be used in
that test.
Fix it by introducing _require_test to for the test ti indicate that
it's about to use TEST_DEV.
Also add _require_test to the new script so that this requirement is a
default.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are about 198 tests which requires scratch_dev, but does not check
the file system consistency afterwards. Xfstests infrastructure does not
do it automatically, so fix it by running _check_scratch_fs() after
each test that _require_scratch.
Also remove all the _check_scratch_fs() calls that are not actually needed
and will be covered by the check script.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/317 and generic/318 fail un-gracefully on older kernels
which don't support userns; fix that by running a simple test
as a prerequisite and fail gracefully if needed.
Roll that in with the test for executable presence, and make
a new _require_userns()
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Changes in the XFS logging code have lead to small leaks in the log
grant heads that consume log space slowly over time. Such problems have
gone undetected for an unnecessarily long time due to code complexity
and potential for very subtle problems. Losing only a few bytes per
logged item on a reasonably large enough fs (10s of GB) means only the
most continuously stressful workloads will cause a severe enough failure
(deadlock due to log reservation exhaustion) quickly enough to indicate
something is seriously wrong.
Recent changes in XFS export the state of the various log heads through
sysfs to aid in userspace/runtime analysis of the log. This test runs a
workload against an XFS filesystem, quiesces the fs and verifies that
the log reserve and write grant heads have not leaked any space with
respect to the current head of the physical log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for the btrfs ioctl clone operation when the source range
contains hole(s) and the FS has the NO_HOLES feature enabled (file holes
don't need file extent items in the btree to represent them).
This issue is fixed by the following linux kernel btrfs patch:
Btrfs: fix clone to deal with holes when NO_HOLES feature is enabled
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So that the same check (btrfs cloner program presence) can be reused
by other tests.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
I don't have flink support in my xfsprogs, but it doesn't fail with "command not
found" or whatever, it fails because I don't have the -T option, whereas Eric
gets an error about $TEST_DIR being a directory because his xfs_io tries to open
the directory first before it parses the options. So fix this by checking flink
with these two cases and don't run if we hit either of them. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Free inode btree tests must ensure that the userspace and kernel bits
are compatible. Add a couple checks for the associated support.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If TEST_DEV or SCRATCH_DEV is symlink(mostly a lvm lv), a simple
basename is not enough, symlink should be followed.
This task is common enough, so introduce new helper functions and
replace all readlink calls in
ext4/305
generic/009
generic/019
generic/285
generic/312
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Number of helpers for checking xfs_io functionality is slowly
growing. But it's as easy to simply use _require_xfs_io_command()
directly and just specify the command we want to check. It will also
avoid the need to create helper every time we need to check a new
command in xfs_io.
Remove all the helpers and use _require_xfs_io_command() in the
tests.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add a helper function to verify fallocate zero range support in a style
similar to _require_xfs_io_falloc_collapse(), etc.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Functions like _mount_opts(), _mkfs_opts() and _fsck_opts() are
defined both in common/rc and common/config while used only in
common/config.
Remove those functions from common/rc and update _mount_opts() to match
the superior version of the function.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test verifies that after an incremental btrfs send the
replicated file has the same exact hole and data structure as in
the origin filesystem. This didn't use to be the case before the
send stream version 2 - holes were sent as write operations of 0
valued bytes instead of punching holes with the fallocate system
call, and pre-allocated extents were sent as well as write
operations of 0 valued bytes instead of intructions for the
receiver to use the fallocate system call.
It also checks that prealloc extents that lie beyond the file's
size are replicated by an incremental send.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add config option RECREATE_TEST_DEV to allow to recreate file system on
the TEST_DEV device. Permitted values are true and false.
If RECREATE_TEST_DEV is set to true the TEST_DEV device will be
unmounted and FSTYP file system will be created on it. Afterwards it
will be mounted to TEST_DIR again with the default, or specified mount
options.
Also recreate the file system if FSTYP differs from the previous
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test for fallocate zero range at block boundary. This is similar to
the test xfs/290 however this one is generic and we're testing different
block sizes as well - namely 1k, 2k, 4k and 64k. Note that we're not
creating file systems with given block size buy rather test all 4
options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there are several function testing various xfs_io commands.
This commit creates _require_xfs_io_command() to test any xfs_command.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To avoid repeating detection of fssum presence in many btrfs tests, as
suggested by Dave Chinner.
Also exported the variable "here" from the main control script, to avoid
repeating its declaration in every single testcase file. Also removed the
declaration of "here" from btrfs test cases that require the fssum program
only. Removing it from all other test cases will be a separate change.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Dmitry Monakhov
Dave Chinner
Anand Jain
Eryu Guan
Xiaoguang Wang
Lukas Czerner
Eric Sandeen
Brian Foster
Filipe David Borba Manana
Josef Bacik
Eric Whitney
Christoph Hellwig
Namjae Jeon