Create a new helper function to discover the minimum log size that will
work with the mkfs options provided, then remove all the hardcoded block
sizes from various xfs tests. This will be necessary when we turn on
reflink or rmap by default and the minimum log size increases.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Tested-by: Yang Xu<xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The always_cow mode can't usefull preallocate space gіven that it
always has to write out of place, and thus will reject falloc or
ioctl calls to preallocate space in a file. Add explicit checks for
preallocation support in various XFS-specific tests to support this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Fully scripted conversion, see script in initial SPDX license commit
message.
tests/xfs/044 was hand massaged to remove duplicate copyright and
divider lines before running the script.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Previously _scratch_mount didn't check the mount status and most
tests continue to run even if the mount failed (unless test checks
for the mount status explicitly). This would result in running tests
on the underlying filesystem (usually rootfs) and implicit test
failures, and such failures can be annoying and are usually hard to
debug.
Now _fail test by default if _scratch_mount failed and introduce
_try_scratch_mount for tests that need to check mount results
themselves.
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We're removing from XFS the ability to perform no-allocation file
creation. This was added years ago because some customer of SGI
demanded that we still be able to create (empty?) files with zero
free blocks remaining so long as there were free inodes and space in
existing directory blocks. This came at an unacceptable risk of
ENOSPC'ing midway through a transaction and shutting down the fs, so
we're removing it for the create case having changed our minds 20
years later.
However, some tests fail as a result, so fix them to be more
flexible about not failing when a dir/file creation fails due to
ENOSPC.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Adapt to different metadata overhead sizes by trying to reserve
decreasing amounts of disk space until we actually succeed at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <eguan@redhat.com>
There're many tests don't remove $seqres.full before writing to it, and
accumulating logs there, then the logs are always growing over time.
Let's fix them once.
generic/16[1-8] generic/170 and generic/33[34] truncate $seqres.full in
the middle of the test, which results in partial logs. Fix them as well.
xfs/227 has duplicated lines to remove $seqres.full, remove the extra
line.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Replace every explicit mount/umount of scratch or test devices with
helper functions. This allows the next patch to add in hooks to these
functions in order to set up & tear down overlayfs on every mount/umount
(also adds _test_unmount(), which didn't exist prior)
[Eryu Guan rebased the patch agains latest master and replaced more
mount/umount with helpers]
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/104, xfs/119, xfs/291 and xfs/297 have small fixed log sizes. A
recent change to the kernel ramdisk changed it's physical sector
size from 512B to 4kB, and this results in mkfs calculating a log
size larger than the fixed test size and hence the tests fail.
Change the log size to a larger size that works with 4k sectors, and
also increase the size of the filesystem being created so that the
amount of data space in the filesystem does not change and hence
does not perturb the rest of the test.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are about 198 tests which requires scratch_dev, but does not check
the file system consistency afterwards. Xfstests infrastructure does not
do it automatically, so fix it by running _check_scratch_fs() after
each test that _require_scratch.
Also remove all the _check_scratch_fs() calls that are not actually needed
and will be covered by the check script.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In changing the default log sizes in mkfs, the freespace
calculations in xfs/104 are no longer valid and so it fails with
ENOSPC before running any of the growfs tests. Make the test use a
fixed log size of 5MB so that freespace calculations remain valid
and the test passes regardless of whether we have a new or old mkfs
binary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' tests/*/*
will do most of the work automatically.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Darrick J. Wong
Christoph Hellwig
Dave Chinner
Eryu Guan
Eric Sandeen
Lukas Czerner
Rich Johnston