Functions like _mount_opts(), _mkfs_opts() and _fsck_opts() are
defined both in common/rc and common/config while used only in
common/config.
Remove those functions from common/rc and update _mount_opts() to match
the superior version of the function.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfsprogs without crc support won't print crc=0/crc=1, so
_filter_mkfs() leaves _fs_has_crcs variable unset, and xfs/033 fails
because of that.
xfs/033 4s ... - output mismatch (see /root/xfstests/results//xfs/033.out.bad)
--- tests/xfs/033.out 2014-04-16 22:31:49.818350450 -0400
+++ /root/xfstests/results//xfs/033.out.bad 2014-04-16 22:35:08.264401190 -0400
@@ -5,6 +5,7 @@
naming =VERN bsize=XXX
log =LDEV bsize=XXX blocks=XXX
realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+./tests/xfs/033: line 87: [: -eq: unary operator expected
Corrupting root inode - setting bits to 0
Wrote X.XXKb (value 0x0)
Phase 1 - find and verify superblock...
Print _fs_has_crcs=0 to stderr by default, so old xfsprogs could have
this variable set too, and a latter _fs_has_crcs=1 could overwrite it
if the fs does have crc support.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test verifies that after an incremental btrfs send the
replicated file has the same exact hole and data structure as in
the origin filesystem. This didn't use to be the case before the
send stream version 2 - holes were sent as write operations of 0
valued bytes instead of punching holes with the fallocate system
call, and pre-allocated extents were sent as well as write
operations of 0 valued bytes instead of intructions for the
receiver to use the fallocate system call.
It also checks that prealloc extents that lie beyond the file's
size are replicated by an incremental send.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The renameat2() syscall was merged into 3.15-rc (merge commit:
7df934526c0b).
This adds the shared infrastructure for the actual test scripts.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there is a problem with parse_config_section() when the
configuration value contains equality sign like this for example:
MOUNT_OPTIONS="-o data=journal"
the result will be
export MOUNT_OPTIONS="-o data="journal"
which is not going to work. The reason is that the expression used to
parse the configuration options uses greedy matching '.*'. Fix this by
using non greedy expression to match the first equality sign '[^=]'.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently if the FSTYP is not set, the code to get FSTYP using blikd
would not work. This is because we're using HOSTOS environment variable
which might not be set (at least not on my system) and because it's
already late in the code path.
Fix this by using OSTYP environment variable as a fallback in the case
that HOSTOS does not work and move the check to common/config.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the case that we already have sections in the config file we
have to make sure that we unset SCRATCH_DEV if it has been deduced from
the SCRATCH_DEV_POOL so that it does not complain about SCRATCH_DEV in
this case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With changes introduced in 667308dd97
it is no longer possible to use SCRATCH_DEV_POOL variable because of
error:
common/config: Error: $SCRATCH_DEV should be unset when
$SCRATCH_DEV_POOL is set
This was because get_next_config() would get called twice and hence it
would complain on the second run that SCRATCH_DEV is already set. Fix
it by making sure that we call get_next_config() only once if there
are no sections in the config file.
Also make sure that we export SCRATCH_DEV in the case we're deducing it
from SCRATCH_DEV_POOL.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Filipe David Manana <fdmanana@gmail.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add config option RECREATE_TEST_DEV to allow to recreate file system on
the TEST_DEV device. Permitted values are true and false.
If RECREATE_TEST_DEV is set to true the TEST_DEV device will be
unmounted and FSTYP file system will be created on it. Afterwards it
will be mounted to TEST_DIR again with the default, or specified mount
options.
Also recreate the file system if FSTYP differs from the previous
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch add support for sections in the config file. Each section can
contain configuration options in the format
OPTION=value
when one section is processed xfstests will proceed to next section
until all secitons are processed, or an error occur.
The name of the section can consist of alphanumeric characters + '_',
nothing else is allowed. Name of the section is also used to create
results subdirectory for each section. After all the sections are
processed summary of all runs is printed out.
If the config file does not contain sections, or we're not using config
file at all, nothing is changed and xfstests will work the same way as
it used to.
This is very useful for testing file system with different options. Here
is an example of the config file with sections:
[ext4_4k_block_size]
TEST_DEV=/dev/sda
TEST_DIR=/mnt/test
SCRATCH_DEV=/dev/sdb
SCRATCH_MNT=/mnt/test1
MKFS_OPTIONS="-q -F -b4096"
FSTYP=ext4
[ext4_1k_block_size]
MKFS_OPTIONS="-q -F -b1024"
[ext4_nojournal]
MKFS_OPTIONS="-q -F -b4096 -O ^has_journal"
[ext4_discard_ssd]
MKFS_OPTIONS="-q -F -b4096"
TEST_DEV=/dev/sdc
SCRATCH_DEV=/dev/sdd
MOUNT_OPTIONS="-o discard"
Note that once the variable is set it remains set across the sections, so
you do not have to specify all the options in all sections. However one
have to make sure that unwanted options are not set from previous
sections.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add test for fallocate zero range at block boundary. This is similar to
the test xfs/290 however this one is generic and we're testing different
block sizes as well - namely 1k, 2k, 4k and 64k. Note that we're not
creating file systems with given block size buy rather test all 4
options.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Create new function _test_block_boundaries() which is testing content of
the blocks after the operation such as zero, or punch hole. The test is
doing the operation around block boundaries to assure correct behaviour
of the operation on block unaligned ranges.
This has been based on test xfs/290 which has been changed to use this
new function. A small change to the output file was required.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there are several function testing various xfs_io commands.
This commit creates _require_xfs_io_command() to test any xfs_command.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To avoid repeating detection of fssum presence in many btrfs tests, as
suggested by Dave Chinner.
Also exported the variable "here" from the main control script, to avoid
repeating its declaration in every single testcase file. Also removed the
declaration of "here" from btrfs test cases that require the fssum program
only. Removing it from all other test cases will be a separate change.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Version 5 filesystems always have attr2 format enabled, and it
cannot be turned off via the noattr2 mount option. As such, attempts
to mount with noattr2 will be rejected and this causes cascading
failures within the test.
Hence detect if we've created a CRC enabled filesystem, and if this
is the case _notrun the test.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
CRC enabled filesystems emit different errors on corruption.
Specifically, inode corruption is picked up much earlier due to
verifier failures (e.g. incorrect inode identifier) and so
xfs_repair throws errors sufficiently different that filtering
cannot hide the differences. Hence simply add a new golden output
file and link it appropriately once we know what type of filesystem
we are testing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tests the noatime, relatime, strictatime and nodiratime mount
options.
There is an extra check for Btrfs to ensure that the access time is
never updated on read-only subvolumes. (Regression test for bug
fixed with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test for a btrfs incremental send issue where we end up sending a
wrong section of data from a file extent if the corresponding file
extent is compressed and the respective file extent item has a non
zero data offset.
Fixed by the following linux kernel btrfs patch:
Btrfs: use right clone root offset for compressed extents
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The first test may start with the file from the previous test, and
that is in an unknown state. Hence always remove the test file
before the first test so that it doesn't have extents inside the
test range as it is supposed to be testing into a hole.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test 17 of _test_generic_punch uses the filesystem block size to do
a sub-single block punch. The result of this is a files of
different sizes and md5sums when the filesystem block size changes.
However the only difference in file contents if the length of the
file - the zeroed region is always in the same place. Hence we can
use hexdump rather than md5sum to check the output remains
consistent and the hole remains in the correct place despite the
changing block sizes.
Fix up all the golden output for all the tests that use this
function, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When running xfstests with an external log, the metadump tests fail
with extra output like:
+filesystem is marked as having an external log; specify logdev on the mount command line.
+xfs_metadump: cannot read superblock for ag 0
Add a _scratch_metadump() function to handle different logdev
configurations automatically for metadump.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
CRCs always enabled 32 bit project inodes and attr2 formats, hence
they cannot be turned off. Add new require rules for the tests that
require attr and 16 bit project IDs so these tests are avoided on
CRC enabled filesystems.
Also, add a xfs_db write check so that we can avoid tests that are
dependent on xfs_db modifying filesystem structures as they will
fail on CRC enabled filessystems right now. This is just temporary
until full write xfs_db support is available.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Lukas Czerner
Eryu Guan
Filipe David Borba Manana
Miklos Szeredi
Christoph Hellwig
Dave Chinner
Namjae Jeon
Koen De Wit
Brian Foster