The XFS implementation of _scratch_mkfs_sized ignores MKFS_OPTIONS
when a custom block size is set and so isn't testing things like
CRCs on such sized filesytsems. Fix this by ensuring we don't try to
override the block size is it is set in MKFS_OPTIONS. xfs/204 shows
this problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Since common/config is executed twice, if SCRATCH_DEV_POOL is configured
via the environment, the current code removes the first device entry twice
which means that you lose the second device for the test.
The fix is to not remove anything from SCRATCH_DEV_POOL anymore.
That used to be done (I can only guess) to allow to pass the
SCRATCH_DEV_POOL as an argument to _scratch_mkfs. Since _scratch_mkfs adds
the SCRATCH_DEV, the pool mustn't contain that device anymore.
A new function _scratch_pool_mkfs is introduced that does the expected
thing.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Move configuration checks into separate function to allow us to recheck
the options without the need to reinclude the whole source file which is
ugly. We still run the check on include.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
If multiple mount options are given with multiple -o parameters,
_mount_ops_filter concatenates them by replacing all -o's with a comma
(except for the first -o).
If $TEST_DIR contains "-o" (e.g. /mnt/test-os/) you get errors like this:
# ./check generic/002
mount: mount point /mnt/test,s/ does not exist
common/rc: retrying test device mount with external set
mount: mount point /mnt/test,s/ does not exist
common/rc: could not mount /dev/sdc3 on /mnt/test-os/
Fix it by only replacing -o's that are preceded by at least one space.
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We were allowing users to delete their default subvolume, which is problematic.
This test is a regression test to make sure we don't let that happen in the
future. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston: renumbered test from 003 to 009]
This reverts commit 74bcf51c06.
Unfortunately this commit causes dmapi tests to be run on systems which
don't have dmapi installed, so they fail.
Signed-off-by: Ben Myers <bpm@sgi.com>
I test some of the different mkfs options for btrfs, one set doesn't work
properly with small file systems, so the fs won't mount. This is fine from a
btrfs point of view, but tests that fail to mount the scratch fs will run
anyway, so if it's a "fill the fs" sort of test this will wreak havoc. To fix
this just error out of _scratch_mount fails. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs was having issues with generic/311 because of caching issues. Make
_check_scratch_fs take an optional argument to use as the device to fsck.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
supports seek data/hole operation or not. Here _require_seek_data_hole
is defined to do this work.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The -F flag to xfs_io originally enabled it to operate on non-xfs
filesystems. This restriction was removed upstream in favor of
gracefully failing on the handful of operations that actually
required xfs, and the option was deprecated.
However, xfstests is still used on distros with older xfsprogs, and
so "xfs_io -F" was necessary throughout xfstests.
Simplify this by appending -F to XFS_IO_PROG when it's needed -
i.e. if we're using old xfsprogs on a non-xfs filesystem.
This will eliminate errors when new tests leave out the -F, and
if and when -F is finally removed, there will be one central
location in xfstests to update.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Pull all of the old xfs_check script into common/rc:_xfs_check()
so that it properly handles all options, including external log
devices.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
mkfs.ext4 will ask you if you are sure if you try to mkfs an entire disk instead
of just a partition, so any xfstest that uses a scratch device and you specify a
full disk will appear to hang because it's waiting for you to say yes. This
fixes the problem by just forcing it to do its thing.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Replace the usage of the script xfs_check and add the relevant code to
xfstests.
This is in preparation of the planned deprecation of xfs_check.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After the re-factor, common.* have been renamed to common/* but there
are several files still look for the old path, fix it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Some tests 'cd <somedir>' and then direct output to $RESULT_DIR,
which fails if the current working directory is not $here.
Regardless, if an external results directory is to be used it needs
to have a full path specified and the use of $here as the base of
the results files is completely incorrect.
Hence change all the $here/$seqres* references to simply be
$seqres*, and instead encode the full path to the results in
$RESULT_DIR.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Dave Chinner
Stefan Behrens
Lukas Czerner
Koen De Wit
Josef Bacik
Ben Myers
Zheng Liu
Eric Sandeen
Rich Johnston
Eric Sandeen
Dmitry Monakhov
Chandra Seetharaman
Eryu Guan