IMHO, if kernel doesn't supprt realtime, we should skip test.
So add it. Also, when we use _scratch_mkfs on xfs, we will get
the following error:
mkfs failed with extra mkfs options added to "-bsize=4096" by test 590 **
This failure occurs because we have used "export XFS_MKFS_OPTIONS=
${XFS_MKFS_OPTIONS:=-bsize=4096}" in common/config, we don't need to
set it again in extra_options, so remove it.
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Verify ciphertext for v2 encryption policies that use the IV_INO_LBLK_64
flag and use AES-256-XTS to encrypt file contents and AES-256-CTS-CBC to
encrypt file names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The generic/386 test was checking the "Available" field when it
should have been checking the "1k-blocks" field, which represents
the project quota's hard limit. On xfs, an empty directory takes no
space, so it doesn't matter. But for ext4, an empty directory still
takes 4k (or whatever the file system's block size happens to be):
Filesystem 1K-blocks Used Available Use% Pathname
/dev/vdc 512000 4 511996 0% /vdc/test
This causes generic/386 to falsely fail.
This fix is needed to fix generic/386 from failing on ext4:
hard limit 524283904 bytes, expected 524288000
[Eryu: Used $(NF-4) instead of $2 as Eric Sandeen and Yang Xu
suggested]
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This reverts commit 37520a314b.
This commit has been reported to regress, at least, xfs/139 and
btrfs/09[58]. Let's revert it for now.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Without this check the test will fail with message:
fallocate: Operation not supported
Instead, with this _require_xfs_io_command, the test will be skipped
instead if falloc isn't supported.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Andreas Grünbacher reports that on the two filesystems that support
iomap directio, it's possible for splice() to return -EAGAIN (instead of
a short splice) if the pipe being written to has less space available in
its pipe buffers than the length supplied by the calling process.
This is a regression test to check for correct operation. Kernel
needs commit 3253d9d09337 ("splice: only read in as much information
as there is pipe buffer space") to pass.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The only XFS-specific part of this test is the setup, so we can make
the rest a generic test. It's slow, though, as it needs to write 8GB
to convert a big unwritten extent to written.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This's a functional test case for mount --move operation, it verifies
below semantics:
---------------------------------------------------------------------------
| MOVE MOUNT OPERATION |
|**************************************************************************
|source(A)->| shared | private | slave | unbindable |
| dest(B) | | | | |
| | | | | | |
| v | | | | |
|**************************************************************************
| shared | shared | shared | shared & slave | invalid |
| | | | | |
|non-shared| shared | private | slave | unbindable |
***************************************************************************
NOTE: moving a mount residing under a shared mount is invalid.
This case uses fsstress to produce a little random load, to make
sure basic operations won't break the the moved mountpoints.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Test that if we clone part of an extent from a file to itself at a
different offset, fsync it, rewrite (COW) part of the extent from the
former offset, fsync it again, power fail and then mount the filesystem,
we are able to read the whole file and it has the correct data.
This is motivated by a bug found in btrfs which is fixed by a kernel patch
that has the following subject:
"Btrfs: fix missing data checksums after replaying a log tree"
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
generic/551 sometimes fails because it's killed by OOM killer.
That is because aio-dio-write-verify, which is called by
generic/551, tries to allocate memory even though the total
allocation size exceeds the available memory.
aio-dio-write-verify allocates memory according to the 'size'
argument, and generic/551 passes the argument.
Stop adding the argument when the total size is exceeds
the available memory.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Regression test to ensure that dquots are attached to the inode when
we're performing unwritten extent conversion after a directio write
and the extent mapping btree splits.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Dave Chinner reports[1] that an appending AIO DIO write to the second
block of a zero-length file and an fallocate request to the first block
of the same file can race to set isize, with the user-visible end result
that the file size is set incorrectly to one block long. Write a small
test to reproduce the results.
[1] https://lore.kernel.org/linux-xfs/20191029100342.GA41131@bfoster/T/
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The new 'xfsquota' configuration for generic/050 doesn't filter out
SCRATCH_MNT properly and seems to be missing an error message in the
golden output. Fix both of these problems.
Fixes: e088479871 ("generic/050: Handle xfs quota special case with different output")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The first line of generic/563.out is wrong, the number should be
563, not 011. This mismatch will always cause testing fail.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
We did not consistently remove trailing dot from umount output which
can presumably lead to false failures with particular versions of
util-linux. Make sure all umount output is properly filtered.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Instead of faking output for the case of XFS with quotas, just use a
different output file with appropriate output.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
The test gives false failure on ext2 filesystem as 64k file already
has indirect block and so space usage does not exactly match
expectation.
The test really needs to verify only whether quota accounting got
reenabled so just test using creating another empty file which is
not prone to these problems.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Test generic/382 depends on filesystem allocating exactly 30M of blocks
when writing 30M file. This is not true for some filesystems - e.g. for
ext2 due to indirect blocks - while leads to false positive failures.
In this case, the test is not actually interested in comparing exact
usage, rather in verifying the ability to write 30M worth of data. So
instead of comparing 'xfs_quota report' output, just depend on detecting
error when writing files.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Filesystems without journal can happily mount unrecovered filesystem
read-only which confuses this test. Handle this by providing
different expected output for filesystems without journal.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
generic/317 will fail because execvp(cmd) is executed without permission,
where cmd is '$here/src/lstat64 $file', which is called by
$here/src/nsexec -s -U -M "0 $qa_user_id 1000" -G "0 $qa_user_id 1000"\
$here/src/lstat64 $file
So, you will see following output:
From user_ns
...
+execvp: Permission denied
nsexec runs the instruction '$here/src/lstat64 $file' as a regular user,
the regular user may not have permission to access path in '$here'.
Actually, it has been fixed in 4818302fbf ("xfstests: generic/317 use
relative paths..."), which then been modified by b7cecbea22 ("fstests:
Add path $here before src/<file>").
Fixes: b7cecbea22 ("fstests: Add path $here before src/<file>")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Reviewed-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Yang Xu
Eric Biggers
Theodore Ts'o
Eryu Guan
Luis Henriques
Darrick J. Wong
Kusanagi Kouichi
Omar Sandoval
Zorro Lang
Filipe Manana
Masayoshi Mizuma
Jan Kara
Zhihao Cheng