This patch removes the mkfs and mount options specified in output
files in xfs/086 and xfs/087.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch defines logstate by adding dump.f2fs for f2fs's clean and
dirty logs. This macro is added into:
xfs/085
xfs/086
xfs/087
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds checking code whether filesystem supports norecovery
mount option or not. Use this in the following xfs test.
xfs/200 (recovery vs ro-block device)
Currently, norecovery mount option is used by xfs only. But some of
log-based filesystems (e.g., f2fs) are able to support it later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For the follwoing tests, this patch adds general script to get extent and
hole counts.
xfs/137 (data vs filesize)
xfs/138 (data vs filesize vs truncate)
xfs/139 (data vs filesize vs partial truncate)
xfs/140 (data vs filesize vs extending truncate)
xfs/179 (data vs filesize w/ fsync)
xfs/180 (data vs filesize w/ sync)
xfs/182 (data vs filesize w/ recovery)
It also requires these tests to check for fiemap support.
[dchinner: use _require_xfs_io_command "fiemap" for consistency]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This is to detect whether filesystem supports shutdown feature or not.
And let use this into the following xfs tests.
xfs/053 (data exposure)
xfs/137 (data vs filesize)
xfs/138 (data vs filesize vs truncate)
xfs/139 (data vs filesize vs partial truncate)
xfs/140 (data vs filesize vs extending truncate)
xfs/179 (data vs filesize w/ fsync)
xfs/180 (data vs filesize w/ sync)
xfs/182 (data vs filesize w/ recovery)
xfs/200 (recovery vs ro-block device)
xfs/306 (fsstress vs recovery)
xfs/085
xfs/086
xfs/087
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for a btrfs issue of resizing 'thread_pool' when
remount the fs.
This regression was introduced by the following linux kernel commit:
btrfs: Added btrfs_workqueue_struct implemented ordered
execution based on kernel workqueue
08a9ff3264181986d1d692a4e6fce3669700c9f8
And it was fixed by the following linux kernel commit:
btrfs: fix crash in remount(thread_pool=) case
800ee2247f483b6d05ed47ef3bbc90b56451746c
Signed-off-by: Xing Gu <gux.fnst@cn.fujitsu.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
ext4/304 is also ext4 defragmentation stress test, which creates several
threads to perform defragmentation using 'inplace' mode, but there is a
possible race that the donor file has been truncated by thread_A, while
thread_B starts to call ioctl(EXT4_IOC_MOVE_EXT), then we may get a
EINVAL or ENODATA error.
Please see: http://www.spinics.net/lists/linux-ext4/msg46900.html for
detailed information.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Newer versions of btrfs-progs change the default output of 'qgroup
show', we have to check what version is running and use the right option
if needed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The secondary superblock verification in xfs_repair was subject to a bug
that unnecessarily leads to a brute force superblock scan if the last
superblock in the fs happens to be corrupt. Normally, xfs_repair handles
one-off superblock corruption gracefully using a heuristic that finds
the most consistent superblock content across the set of secondary
superblocks.
Create a regression test for xfs_repair that corrupts the last
superblock in the fs. Verify the superblock is updated from the
previously verified sb content and a brute force scan is not initiated.
In the event of failure, detect that a brute force scan has started and
abort the repair in order to fail the test quickly.
To support the test, extend the xfs_repair filter to handle corrupted
superblock repair output and provide generic test output for arbitrary
AG counts.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
mkfs executables may live in either /sbin or /usr/sbin, and
the current regexp in this test only catches the former,
and so the test won't run properly with the latter.
Fix this by filtering out whatever was found as
${MKFS_PROG}, rather than a hard-coded /sbin/mkfs path.
Because the list was generated by using a wildcard
with ${MKFS_PROG}.* this will always be the correct filter.
Reported-by: Boaz Harrosh <boaz@plexistor.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Adds a new test that checks for correct behaviour of
XFS_IOC_FSSETXATTR for directories: extent sizes should always be
settable on a directory, even if the directory already has allocated
extents.
Signed-off-by: Iustin Pop <iustin@k1024.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfstests ext4/302, ext4/303 are ext4 defragmentation stress test,
which will ioctl(EXT4_IOC_MOVE_EXT), so EBUSY is expected to happen,
for example, when page's corresponding buffer_head's state is BH_Dirty.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Acked-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently this test fails on 2 situations:
1) The scratch device supports trim/discard. In this case any modern
version of mkfs.btrfs outputs a message (to stderr) informing that
a trim is performed, which the golden output doesn't expect:
btrfs/017 - output mismatch (see /git/xfstests/results//btrfs/017.out.bad)
--- tests/btrfs/017.out 2015-01-06 11:14:22.730143144 +0000
+++ /git/xfstests/results//btrfs/017.out.bad 2015-01-14 22:33:01.582195719 +0000
@@ -1,4 +1,5 @@
QA output created by 017
+Performing full device TRIM (100.00GiB) ...
wrote 8192/8192 bytes at offset 0
XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
4096 4096
...
(Run 'diff -u tests/btrfs/017.out /git/xfstests/results//btrfs/017.out.bad' to see the entire diff)
So like others tests do, just redirect mkfs' standard error.
2) On platforms with a page size greater than 4Kb. At the moment btrfs
doesn't support a node/leaf size smaller than the page size, but it
supports a larger one. So use the max supported node size (64Kb) so
that the test runs on any platform currently supported by Linux.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by an fsync issue discovered in btrfs.
The steps to trigger the issue were:
1) remove an hard link from an inode with a large number of hard links;
2) add a new hard link;
3) add another hard link with the same name as the one removed in step 1;
4) fsync the inode.
These steps made the btrfs fsync log replay fail (with the -EOVERFLOW
error), making the filesystem unmountable, requiring the use of
btrfs-zero-log (it wipes the fsync log) in order to make the filesystem
mountable again (but losing some data/metadata).
The btrfs issue was fixed by the following linux kernel patches:
Btrfs: fix fsync when extend references are added to an inode
Btrfs: fix fsync log replay for inodes with a mix of regular refs and extrefs
This issue was present in btrfs since the extrefs (extend references)
feature was added (2012).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by an fsync issue discovered in btrfs.
The issue in btrfs was that adding a new hard link to an inode that
already had a large number of hardlinks and fsync the inode, would
make the fsync log replay code update the inode with a wrong link count
(smaller than the correct value). This resulted later in dangling
directory index entries, after removing most of the hard links
(correct_value - wrong_value), that were visible to user space but it
was impossible to delete them or do any other operation on them (since
they pointed to an inode that didn't exist anymore, resulting in -ESTALE
errors).
The btrfs issue was fixed by the following linux kernel patch:
Btrfs: fix fsync when extend references are added to an inode
This issue was present in btrfs since the extrefs (extend references)
feature was added (2012).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test is motivated by an fsync issue discovered in btrfs.
The issue was that after fsyncing an inode that got its link count
decremented, and the new link count is greater than zero, after the
fsync log replay the inode's parent directory metadata became
inconsistent - it had a wrong i_size and dangling index entries which
prevented the directory from ever being removed (rmdir always failed
with -ENOTEMPTY, even if the directory had no more child inodes).
The btrfs issue was fixed by the following linux kernel patch:
Btrfs: fix directory inconsistency after fsync log replay
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
After installing the test suite, src directory only contains binary
programs in the final building directory. Here executing "cp src/itrash.c
$SCRATCH_MNT/${I}" will output "cp: cannot stat 'src/itrash.c': No
such file or directory" error message. Fix it.
Signed-off-by: Xing Gu <gux.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously this test was taking 6-7 minutes, and writing half a
gigabyte of data in the dump/restore test directory. Change this to
be about 60 megs, and to take ~20 seconds.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some filesystems do not support O_DIRECT. Check whether TEST_DIR supports
it by running xfs_io with -d flag.
Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: Dushan Tcholich <dusanc@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To check for FITRIM tests used _require_fstrim() and
_test_batched_discard() but as _test_batched_discard() already
includes _test_fstrim() unify FSTRIM check throughout xfstests with
_require_batched_discard().
Signed-off-by: Dushan Tcholich <dusanc@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
These tests use the falloc command in xfs_io, and there are some file
systems (ext3) or file system configurations (ext4 in ext3
compatibility mode) which do not support fallocate. So add the
explicit requirement to avoid false test failures.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Regression test for a btrfs clone ioctl issue where races between
a clone operation and concurrent target file reads would result in
leaving stale data in the page cache. After the clone operation
finished, reading from the clone target file would return the old
and no longer valid data. This affected only buffered reads (i.e.
didn't affect direct IO reads).
This issue was fixed by the following linux kernel patch:
Btrfs: ensure readers see new data after a clone operation
(commit c125b8bff1d9f6c8c91ce4eb8bd5616058c7d510)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Jaegeuk Kim
Xing Gu
Xiaoguang Wang
David Sterba
Brian Foster
Eric Sandeen
Iustin Pop
Filipe Manana
Theodore Ts'o
Liu Bo
Junho Ryu
Dushan Tcholich