When asked to 'cat' the passwd or group files, currently xfstests runs
the 'domainname' program to get what the kernel thinks the domainname
is. It seems that traditionally this has been "(none)" if YP/NIS is not
in use. However, Android devices use a different convention which is to
set the domainname to "localdomain". Therefore, this patch updates
xfstests to accept both conventions to indicate YP/NIS disabled. This
stops a number of tests from failing when run on Android.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Three new tests:
- Repair files that are mapped into memory in running programs
- Run scrub -n concurrently with fsstress
- Run scrub -y concurrently with fsstress
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
_xfs_mkfs_validation_check() run "$cmd -s size=2s" to be sure if
xfsprogs support stricter input checks. But there's an unexpected
failure on 4k sector device:
# blockdev --getbsz --getpbsz --getss $dev
4096
4096
4096
# mkfs.xfs -f -N -d file,name=$tmpfile,size=1g -s size=2s
illegal sector size 1024; hw sector is 4096
....
So change the sector size from '2s' to '8s' to keep away this
failure.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
tmpfs does not implement ->get_acl method, overlayfs
need to get its cached acls in permission check when
lower or upper fs is tmpfs.
CC: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
In a DAX mountpoint, do IO betwen files with and
without DAX per-inode flag. We do mmap, both
O_DIRECT and buffered read/write IO in this case.
Then test again in the same device without dax
mountoption.
Add help _require_scratch_dax to make sure we can
test DAX feature on SCRATCH_DEV.
Add mmap dio test programme to test read/write
between a mmap area of one file and another file
directly or buffered, with different size.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Xiong Zhou <xzhou@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is a regression test for "Btrfs: fix btrfs_decompress_buf2page()".
It fails for zlib on v4.10-rc[1-7].
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
When I try to write cases about mount shared subtrees test, I find I
always need to do many mount operations, then then umount those
mount point one by one.
To make the code clear, I use a stack to save mounted points
sequentially, then I write 3 common functions to operate this stack.
1. The global stack named MOUNTED_POINT_STACK
2. _get_mount() accepts mount parameters like _mount() does, but the
mountpoint parameter must be the last one. It will run the
mount operation and push the mountpoint name into stack.
3. _put_mount() doesn't need any parameter. It will pop the newest
mountpoint name from the stack, and umount it.
4. _clear_mount_stack() doesn't need any parameter either. It will
umount all mountpoints in the stack sequentially, and set
MOUNTED_POINT_STACK=""
Generally, the _clear_mount_stack() function also can be used as
_init_mount_stack() at the beginning of a case. Because it will
prepare an empty stack.
[eguan: add comments and fix code style]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
xfs/083 fails because _scratch_fuzz_modify redirects xfs_io stdout
to $ROUND2_LOG. _scratch_fuzz_modify function has been modified by
commit 7a7463d362 ("populate: fix some silly errors when
modifying a fs while fuzzing").
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
/dev/urandom is incompressible and, /dev/zero is highly compressible,
so both are less effective in testing the compress code logic in btrfs.
This patch introduces a text data generator
cat /dev/urandom | od
to populate the files where /dev/urandom is currently being used in the
btrfs test cases.
And updates the _populate_fs() with a new option -c, so to instruct
to use the compressible data to populate the file(s).
[eguan: add comments, fix indention]
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The generic/052 and generic/054 tests run ls on the root directory,
and on ext4 we have a lost+found directory which is not in the
golden output.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This is used to check the source which contains combination of Ext3
files in non-extent format and Ext4 extent-files. And validate the
file md5sums before and after conversion.
btrfs/012: BTRFS_CONVERT_PROG,E2FSCK_PROG definitions reused from
common/config
Signed-off-by: Lakshmipathi.G <Lakshmipathi.G@giis.co.in>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Create some routines to help us perform targeted fuzzing of individual
fields in various XFS structures. Specifically, we want the caller to
drop the xfs_db iocursor on the victim field; from there, the scripts
should discover all available fields and fuzzing verbs, and try each
fuzz verb on every available field.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Create a helper function to create a populated FS image and dump the
metadata into a file on the test device, with the purpose of allowing
future (fuzzer) invocations of _populate_fs use the cached metadata to
save time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Move some fuzzing helper functions into a new common/fuzzy file.
We'll add a lot more fuzzing helpers in subsequent patches.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
There were some silly errors in _scratch_fuzz_modify such that it
wasn't really doing much of anything because of undefined variables.
(Sloppy refactoring when converting xfsfuzz.sh into xfstests.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Be a little more flexible in how much we fill up a pre-populated
filesystem. For the field fuzzing tests, we don't need the extra
space/inode usage and therefore won't want much at all.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Back when I created common/populate, I thought it was sufficient to
_require the tools that the populate functions need in the main
file. This turned out to be a bit sloppy, so move them into a
helper function and call it from everything that uses populate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We have three new metadata types -- rmapbt, rtrmapbt, and refcountbt.
Ensure that we populate the scratch fs with all three.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Wait for device to be fully settled so that 'dmsetup remove' doesn't
fail due to EBUSY.
Signed-off-by: Boyang Xue <bxue@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The command btrfs-show-super is not supposed to be distributed but
was useful for testing. The same functionality is now present as
'btrfs inspect-internal dump-super', let's detect which one is
available and use it in btrfs/011 that fails with btrfs-progs 4.8.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
generic/401 failed on RHEL6.8GA because "--output=xxx"
option is not supported by df. So we remove it.
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Eric Biggers
Darrick J. Wong
Zorro Lang
Xiong Zhou
Omar Sandoval
Xiao Yang
Anand Jain
Theodore Ts'o
Lakshmipathi.G
Boyang Xue
David Sterba