supports seek data/hole operation or not. Here _require_seek_data_hole
is defined to do this work.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
fix shared/298:
* don't include common/config, not needed and breaks
stuff when $SCRATCH_DEV_POOL is defined:
Error: $SCRATCH_DEV should be unset when $SCRATCH_DEV_POOL is set
* make sure xfs_io has fiemap, we'll need it
* add -F to the xfs_io invocation, again, for use on
old xfsprogs on non-xfs filesystems
* ignore ENOSPC errors from "garbage" loop; the only goal
is to fill it, ENOSPC doesn't matter.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After finished test, temporarily fio config file should be removed.
This commit tries to fix this problem in the following test cases:
- generic/299-300
- ext4/301-304
- shared/305
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/233 attempts to direct output to tee, but instead of using a
pipe it uses an append operator. Hence it leaves a file named "tee"
in the root directory of the xfstests execution path. Just direct
the output to the $seqres.full file rather than trying to tee it
into the test output as well.
Reported-by: "Michael L. Semon" <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The -F flag to xfs_io originally enabled it to operate on non-xfs
filesystems. This restriction was removed upstream in favor of
gracefully failing on the handful of operations that actually
required xfs, and the option was deprecated.
However, xfstests is still used on distros with older xfsprogs, and
so "xfs_io -F" was necessary throughout xfstests.
Simplify this by appending -F to XFS_IO_PROG when it's needed -
i.e. if we're using old xfsprogs on a non-xfs filesystem.
This will eliminate errors when new tests leave out the -F, and
if and when -F is finally removed, there will be one central
location in xfstests to update.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
In one place of test 306, we mistakenly used /dev/null and /dev/zero
instead of equivalent devices created on tested filesystem. So we were
not really testing the functionality we intended.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
--
make install support common/ and tests/ dirs (V4)
* reposted for current top of tree changes. [rjohnston@sgi.com]
* use the neater way by Dave to get the TESTS_SUBDIRS in tests/Makefile.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
[rjohnston@sgi.com Reposted for current top of tree changes]
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This patch adds execution of a custom command in the middle of all fsstress
operations. Its intended use is the creation of snapshots in the middle of a
test run.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Pull all of the old xfs_check script into common/rc:_xfs_check()
so that it properly handles all options, including external log
devices.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Tests after 276 were failing because the background fsstress
hadn't quit prior to exit, devices couldn't be unmounted, etc.
Just use the same trick as generic/068 does, and use
a tmpfile to control whether the background loop keeps
running.
Also, no need to umount scratch at cleanup time, the scripts
do that for us.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Schmidt list.xfs@jan-o-sch.net
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
older xfs_io refused to write to /dev/null because it's
not a file on an xfs filesystem. So add -F.
While we're at it, add more testcases:
* symlink on a RO fs pointing to a file on a RW fs.
* bind-mounted rw file on an RO fs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/131 attempts to kill processes that may no longer exist when
the test finishes and has a broken redirect for the error messages
and they end up in a file named "1" in the xfstests root instead of
/dev/null.
Not only that, the attempts to redirect stderr to stdout in the
middle of the test use incorrect redirect syntax, so they create an
empty file named "1" in the xfstests root...
IOWs, all the redirects in the test are broken. Fix them and clean
up the failure case to use the exit trap to trigger the cleanup
function....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/232 attempts to direct output to tee, but instead of using a
pipe it uses an append operator. Hence it leaves a file named "tee"
in the root directory of the xfstests execution path. Just direct
the output to the $seqres.full file rather than trying to tee it
into the test output as well.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test 063 fails because the diff output now has entire paths to the
files in the results directory in it rather than just the file name.
Add the results directory to the directory filter used by the dump
tests to remove the path from the diff output.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Test 310 fails with:
mkdir: cannot create directory `/mnt/test/tmp': File exists
$TEST_DIR is persistent, so test directories need to be created with
"mkdir -p" so they don't fail if the directory already exists.
Many other things need fixing, too.
- Tests should define directories they use on $TEST_DIR by
their sequence number, not generic names.
- Use a variable for the directory the test runs in
($SEQ_DIR, in this case) to avoid having to manually code
it everywhere.
- New binaries need to be added to .gitignore.
- Return status for shell functions is 0 for success,
non-zero for failure.
- Setting status=0 if there is no failure in the first test
means that even if the second test fails, the test will
still pass. Change the test to use "_fatal" when a kernel
bug is detected, and only set status=0 when the entire
test has finished.
- reduce the default runtime by to roughly a minute and
scale it with the stress load factor variables. In most
cases, this test is never going to hit problems (as
they've already been fixed) so running it for ~4 minutes
is mostly a waste of time...
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Prior to the test directory split-up, xfstests used to output the
time it previously took to run a specific test in it's output. This
was broken during the split up, as test identifiers changed and the
result output changed.
To fix this, the search for previous test results needs to look at
the sequence number rather than the absolute sequence for the test.
The new output looks the same as the old functionality:
generic/001 4s ... 5s
generic/002 1s ... 0s
generic/005 1s ... 1s
generic/006 1s ... 1s
generic/007 2s ... 1s
Where the first column is the time of the previous test run, and the
second column is the time that this run took.
Further, the check files used to generate this information are not
being output properly in the result directory, and so various log
files are not getting written to the correct location or file names.
For example, the calls to _check_test_fs would output failures to
".full", while other messages would be output to check.full, but
none would output to the corect location of RESULT_BASE/check.full.
Fix all this mess up so that all the check files for a specific run
end up in RESULT_BASE, and ensure the timing code checks the right
file and dumps output.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
mkfs.ext4 will ask you if you are sure if you try to mkfs an entire disk instead
of just a partition, so any xfstest that uses a scratch device and you specify a
full disk will appear to hang because it's waiting for you to say yes. This
fixes the problem by just forcing it to do its thing.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Option 'group_reporting' semantics changed in recent fio versions.
In fact we do not need it here, let's just drop it.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Not sure how this happened, but filter.btrfs including
itself leads to immense sadness for any file that includes it.
(I got a segfault when I tried to run 307)
It should be including ./common/filter not ./common/filter.btrfs
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Zheng Liu
Eric Sandeen
Dave Chinner
Jan Kara
Wang Sheng-Hui
Jan Schmidt
Josef Bacik
Rich Johnston
Eric Sandeen
Zhao Hongjiang
Dmitry Monakhov