Fixes the following ASAN failure:
==11670==WARNING: AddressSanitizer failed to allocate 0xffffffffffffffff bytes
==11670==AddressSanitizer's allocator is terminating the process instead of returning 0
...
#5 0x4bb230 in __interceptor_malloc /home/vak-local/3.9.1/release/final/llvm.src/projects/compiler-rt/lib/asan/asan_malloc_linux.cc:65:10
#6 0x7f97e6491405 in getcwd /build/glibc-6V9RKT/glibc-2.19/io/../sysdeps/unix/sysv/linux/getcwd.c:68
#7 0x454691 in getcwd /home/vak-local/3.9.1/release/final/llvm.src/projects/compiler-rt/lib/asan/../sanitizer_common/sanitizer_common_interceptors.inc:2822:15
#8 0x4f765d in doproc /.../ltp/fsstress.c:933:12
#9 0x4f5f54 in main /.../ltp/fsstress.c:581:5
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <eguan@redhat.com>
XFS_IOC_DIOINFO is only used for XFS, but fsstress use it to get
DIO aligned size. If XFS_IOC_DIOINFO returns error, then stop
doing any DIO related test (dread/dwrite/aread/awrite etc). That
means we never do DIO related test on other filesystems by fsstress.
The real minimal dio size is really not so important for DIO test
in fsstress. The multiple of real min dio size is fine too. I think
the stat.st_blksize get from stat() system call can be used to be
a fake minimal dio size, if XFS_IOC_DIOINFO fails (not supported).
Note that the equation about d_maxiosz is copied from kernel
XFS_IOC_DIOINFO ioctl source code:
case XFS_IOC_DIOINFO: {
...
da.d_mem = da.d_miniosz = target->bt_logical_sectorsize;
da.d_maxiosz = INT_MAX & ~(da.d_miniosz - 1);
...
}
[eguan: update commit log add d_maxiosz reference]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We found some bugs by aio read/write test, but there's no such
operations in fsstress. So add AIO test into fsstress to increase
AIO stress test.
Due to most kernels don't support aio fsync, so set its test
frequency to zero as default.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We found some bugs by writev operations recently, writev can cover
different test than normal write operation, so add writev and readv
operations into fsstress.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
The "-c" option of fsstress will clean up the test directory after
each run. But it only does "rm -rf $dir". If run fsstress likes:
fsstress -d $test_dir -n 1000 -p 10 -l 0 -c
fsstress will remove all test directories at the end of each run,
but the flist still save those *deleted* entries. It'll cause
more and more useless ENOENT failures. So we need to release all
entries in flist too.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
mmap is a popular and basic operation, most of softwares use it to
access files. More and more customers report bugs related with
mmap/munmap and other stress conditions.
So add mmap read/write test into fsstress to increase mmap related
stress to reproduce or find more bugs easily.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
This option causes fsstress to delete the test directory between each
run. This is the opposite from the ltp version of fsstress, which
deletes the test directory by default, and the -c option caused ltp's
fsstress _not_ to delete the test directory.
It can be useful to be able to have the same test behavior as ltp
version, and although reversing the sense of the option is
unfortunate, it also reserves the -c option, which makes it a bit
easier if we want to eventually have one version which is a superset
of the xfstest and ltp version of fsstress.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This feature is in the ltp version of fsstress; port it into
xfstests.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This commit adds insert operation support for fsstress, which is
meant to exercise fallocate FALLOC_FL_INSERT_RANGE support.
[dchinner: turn off this op for xfs/068, which expects an exact
outcome from the fsstress execution. ]
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There is if condition to be block aligned for off and len of Collapse range.
But off and len for all fallocate opearion can be aligned by incorrect
if condition check.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This commit adds collapse operation support for fsstress, which is
meant to exercise fallocate FALLOC_FL_COLLAPSE_RANGE support.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This commit adds fzero operation support for fsstress, which is meant to
exercise fallocate FALLOC_FL_ZERO_RANGE support.
Also reorganise the common fallocate code into a single do_fallocate()
function and use flags use the right mode.
Also in order to make more obvious which fallocate mode fsstress is
testing translate fallocate flags into human readable strings.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move the inclusion of falloc.h with all it's possible defines for the
fallocate mode into global.h header file so we do not have to include
and define it manually in every tool using fallocate.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
- It would be useful to have verifiable logging mode which will contain
only deterministic information which allow to compare two logs files
generated from two runs with same seed.
- Also add missed help for '-o logfile' option
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This change allows xfstests runs to simulate apps
which don't bother to call XFS_IOC_DIOINFO, and simply
issue DIO in sizes and alignments of its own choosing.
So i.e.:
# export XFS_DIO_MIN=512
prior to an xfstests run, and these test binaries
should issue 512-aligned DIOs instead of whatever
XFS_IOC_DIOINFO says (i.e. instead of maybe 4k).
(This is in preparation for allowing 512 IOs on
"advanced format" 512/4k disks, when xfs has an
internal 4k sector size).
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The show_ops() output should come as part of the -f option
help.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This patch adds execution of a custom command in the middle of all fsstress
operations. Its intended use is the creation of snapshots in the middle of a
test run.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
I was running 068 to test freeze changes, and realized that
"sync" is not in the op list when "-w" (write ops) is specified,
although fsync & fdatasync are. It seems to me that sync should
be a default write op as well.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Add two new operations:
- getattr: ioctl(fd, FS_IOC_GETFLAGS, &fl)
- setattr: ioctl(fd, FS_IOC_SETFLAGS, &random_flags)
Attribute mask may be passed via -M opt, by default is (~0).
By default FS_IOC_SETFLAGS has zero probability because
it may produce inodes with APPEND or IMMUTABLE flags which
are not deletable by default. Let's assumes that one who
enable it knows how to delete such inodes.
For example like follows:
find $TEST_PATH -exec chattr -i -a {} \;
rm -rf $TEST_PATH
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add tests for fallocate(2) syscall
- fallocate: reserve the disk space
- punch: de-allocates the disk space
Since FALLOC_FL_PUNCH_HOLE is relatively new it's value defined
explicitly if not yet defined. Later we may clear that define.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Rostislav Skudnov
Zorro Lang
Jeffrey Bastian
Theodore Ts'o
Namjae Jeon
Lukas Czerner
Dmitry Monakhov
Eric Sandeen
Jan Schmidt
Eric Sandeen