With the change to CRCs by default, some tests are updated to call mkfs
with "-m crc=0" option directly, and this breaks testings on older
distros where mkfs.xfs doesn't have crc support.
Introduce a new variable to tell if mkfs.xfs supports v5 xfs and do
tweaks in _scratch_mkfs_xfs_opts() based on it.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On devices that have a logical sector smaller than physical sector,
this extra, harmless output now occurs:
QA output created by 060
+specified blocksize 1024 is less than device physical sector size 4096
+switching to logical sector size 512
Creating directory system to dump using src/fill.
Setup .......................................
Dumping to files...
And it causes lots of tests to fail unnecessarily. Filter it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
_require_command fails when a parameter based command is passed to
it, such as "xfs_io -F" or "btrfs filesystem defrag" as the command
string does not point at a binary. Rather than hacking at all the
callers and limiting what we can do with $*_PROGS variables, just
make _require_command handle this case sanely.
Change _require_command to check for one or two variables passed to
it and to fail if none or more than 2 parameters are passed. This
will catch most cases where unquoted parameter-based commands are
passed. Further, for the command variable, the executable we need to
check for is always going to be the first token in the variable.
Hence we can simply ignore everything after the first token for the
purposes of existence and executable checks on the command.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The "brd" kernel ram disk abuses BLKFLSBUF to mean "free all memory
in the ram drive" when in fact it should mean "flush all dirty
buffers to stable storage". The brd driver ignores BLKFLSBUF if
there is an active reference to the block device, (e.g. a fs is
mounted on it), but when a device is layered over the top of it
(e.g. dm-flakey, lvm devices, etc) then the applications and
filesystems hold references to the upper device, not the brd device.
Hence when the upper device passes down BLKFLSBUF to brd, it removes
all the pages in the brd, effectively erasing it. This causes all
sorts of problems.....
Fix this by black listing "/dev/ramXXX" devices from tests that
require DM in some way. The _requires_sane_bdev_flush() macro is
called by the _requires_dm.... checks so that we don't have to
remember to add this to all new tests that use dm in some way.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Full DM snapshot devices can return unexpected errors from the
underlying device, and this causes problems for filesystems. In
particular, xfs used to panic in this test, (fixed by commit 8d6c121
"xfs: fix buffer use after free on IO error"), and on current
4.0-rc3 kernels both ext4 and btrfs trigger WARNINGs.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To allow test names to be more descriptive, allow a suffix to be
added to the numeric name of the test. e.g. a test can be named
"tests/generic/001-some-descriptive-name".
Name suffixes are limited to alphanumeric characters and dash - the
name is always prefixed with an unique id for easy identification
of a specific test. Hence we can still use shorthand forms such as
"generic/001" when referring to a test and be clearly understood.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This commit
73dfa4a common: Fixes for testing NFS over IPv6
adds NFS over IPv6 support, and commit
76c5f3c common: re-enable tests that require scratch dev on NFS
enables NFS tests on scratch device.
Now do the same updates to _require_scratch_nocheck() to enable NFS over
IPv6 support on scratch device.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In generic/019, if we hadn't install fio, we will get following output:
generic/019 [not run] utility required, skipped this test <- *
Not run: generic/019
Passed all 0 tests
When fio is not installed, "$FIO_PROG" is set to blank, and
_require_fio() call _require_command() with none arguments.
This patch fixed all misuse of _require_command(), add 2nd argument
to let _require_command() output right message, and add quotes to
first argument to avoid argument shifting.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_copy doesn't work on v5 xfs without -d option, this fails xfs/073
when testing xfs with MKFS_OPTIONS="-m crc=1" set.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Many tests use dm_flakey to trigger log replay, but for filesystems that
don't support metadata journaling, this causes failures when it shouldn't.
(i.e. we can hardly test log replay if there is no log, and the subsequent
filesystem check will turn up errors).
For some tests they actually sync everything we care about, and find
inconsistencies elsewhere, but I erred on the side of simply not running
the test in most cases.
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch adds checking code whether filesystem supports norecovery
mount option or not. Use this in the following xfs test.
xfs/200 (recovery vs ro-block device)
Currently, norecovery mount option is used by xfs only. But some of
log-based filesystems (e.g., f2fs) are able to support it later.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For the follwoing tests, this patch adds general script to get extent and
hole counts.
xfs/137 (data vs filesize)
xfs/138 (data vs filesize vs truncate)
xfs/139 (data vs filesize vs partial truncate)
xfs/140 (data vs filesize vs extending truncate)
xfs/179 (data vs filesize w/ fsync)
xfs/180 (data vs filesize w/ sync)
xfs/182 (data vs filesize w/ recovery)
It also requires these tests to check for fiemap support.
[dchinner: use _require_xfs_io_command "fiemap" for consistency]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This is to detect whether filesystem supports shutdown feature or not.
And let use this into the following xfs tests.
xfs/053 (data exposure)
xfs/137 (data vs filesize)
xfs/138 (data vs filesize vs truncate)
xfs/139 (data vs filesize vs partial truncate)
xfs/140 (data vs filesize vs extending truncate)
xfs/179 (data vs filesize w/ fsync)
xfs/180 (data vs filesize w/ sync)
xfs/182 (data vs filesize w/ recovery)
xfs/200 (recovery vs ro-block device)
xfs/306 (fsstress vs recovery)
xfs/085
xfs/086
xfs/087
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Newer versions of btrfs-progs change the default output of 'qgroup
show', we have to check what version is running and use the right option
if needed.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce _disable_dmesg_check function, which can be called by tests
that generate WARNINGs etc. on purpose, so the tests won't fail
_dmesg_check.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Commit 01d42b7efe broke the check
for the success status of running fstrim. The [ ] bracets should
have been killed. This made several tests being skipped even when
the test/scratch devices support trim/discard.
For reference:
$ [ fstrim /mnt/ ] || echo foobar
bash: [: fstrim: unary operator expected
foobar
$ fstrim /mnt/ || echo foobar
$ echo $?
0
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
So the callers could know if these functions find corruptions by the
return value.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If _check_xxx_filesystem called by tests when corruption found
they exit, but we don't want the calls from the test harness itself to
exit when corruption is found.
_check_xfs_filesystem already behaves correctly, make
_check_generic_filesystem and _check_btrfs_filesystem follow the same
behavior.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Some filesystems do not support O_DIRECT. Check whether TEST_DIR supports
it by running xfs_io with -d flag.
Signed-off-by: Junho Ryu <jayr@google.com>
Signed-off-by: Dushan Tcholich <dusanc@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
To check for FITRIM tests used _require_fstrim() and
_test_batched_discard() but as _test_batched_discard() already
includes _test_fstrim() unify FSTRIM check throughout xfstests with
_require_batched_discard().
Signed-off-by: Dushan Tcholich <dusanc@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>