Commit Graph

191 Commits

Author SHA1 Message Date
Filipe David Borba Manana 2dd0dbe3f8 btrfs: add function _require_fssum()
To avoid repeating detection of fssum presence in many btrfs tests, as
suggested by Dave Chinner.

Also exported the variable "here" from the main control script, to avoid
repeating its declaration in every single testcase file. Also removed the
declaration of "here" from btrfs test cases that require the fssum program
only. Removing it from all other test cases will be a separate change.

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 15:17:44 +11:00
Dave Chinner b50473c849 xfs/167: need at least 10GB of scratch space to run
When running on a ramdisk, the fsstress background workload consumes
a GB of disk space every 5 seconds. This leads to the test failing
with ENOSPC because the test file cannot be created due otthe
background load cosuming it all. Hence don't run this test unless
the scratch device is large enough not to hit ENOSPC conditions.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 14:58:39 +11:00
Dave Chinner 4a74700a90 xfs/217: prevent enospc failures on small test devices
I'm running xfstests against a ramdisk, so I'm limited in size of
the test and scratch devices. While there are large enough to hold a
filesystem image with a 2GB log, the way the log changes position in
an image file as the size of the filesystem increases means that the
aggregated disk space of xfs/217 is more than enough to run a 4GB
TEST_DEV out of space and hence fail the test.

To avoid this problem, punch out the image file between every mkfs
iteration so that it only consumes the space needed by each
individual mkfs tests, not an aggregation of them all.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 14:58:31 +11:00
Dave Chinner 84edd7a868 generic/003: ensure time changes between stat calls
On a fast device like a ramdisk, kernel time may not have changed
between a stat of a file and some operation on it immediately
afterwards. Hence there is no guarantee that an operation actually
changes the timestamps of a file immediately after it is stat'd.

Hence, ensure that the times will change by sleeping for a second
between the initial stat that reads the timestamps and the
operations that is supposed to modify them. This way we ensure that
the timestamp will change if the filesystem is correctly
implemented.

While there, fix the indenting to be 8 space tabs and correct the
header which is missing the bash shell declaration and the test
number identifier.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 14:58:24 +11:00
Dave Chinner 97a665b5fc xfs/189: noattr2 invalid for CRC enabled filesystems
Version 5 filesystems always have attr2 format enabled, and it
cannot be turned off via the noattr2 mount option. As such, attempts
to mount with noattr2 will be rejected and this causes cascading
failures within the test.

Hence detect if we've created a CRC enabled filesystem, and if this
is the case _notrun the test.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 14:58:16 +11:00
Dave Chinner 763b46f3be xfs/033: add golden output for CRC enabled filesystems
CRC enabled filesystems emit different errors on corruption.
Specifically, inode corruption is picked up much earlier due to
verifier failures (e.g. incorrect inode identifier) and so
xfs_repair throws errors sufficiently different that filtering
cannot hide the differences. Hence simply add a new golden output
file and link it appropriately once we know what type of filesystem
we are testing.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-03-13 14:58:09 +11:00
Namjae Jeon f1dcf49c11 shared/005: Test multiple fallocate collapse
We execute collapse range multiple times on same file.  Each
collapse range call collapses a single alternate block.  After the
test execution, file will be left with 80 blocks and as much number
of extents.  We also check for file system consistency after the
completion.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-24 10:16:24 +11:00
Namjae Jeon db0486604e shared/004: Delayed allocation multi collapse
shared/004 tries to test various corner cases with delayed extents
and pre-existing holes for fcollapse range functionality over
different type of extents.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
2014-02-24 10:11:26 +11:00
Namjae Jeon d875ae9f9a shared/003: Multi collapse range tests
shared/003 tries to test various corner cases with pre-existing holes
for fcollapse range functionality over different type of extents.

Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
2014-02-24 10:11:04 +11:00
Namjae Jeon 41f635501a shared/002: Delayed allocation collapse range
shared/002 tries to test various corner cases with delayed extents
for fcollapse range functionality over different type of extents.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-24 10:10:20 +11:00
Namjae Jeon c6d351279f shared/001: Standard collapse range tests
shared/001 tries to test various corner cases for fcollapse range
functionality over different type of extents.

Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-24 10:08:16 +11:00
Koen De Wit db6d20e672 generic: test for atime-related mount options
Tests the noatime, relatime, strictatime and nodiratime mount
options.

There is an extra check for Btrfs to ensure that the access time is
never updated on read-only subvolumes. (Regression test for bug
fixed with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)

Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-19 08:26:56 +11:00
Filipe David Borba Manana 053556537f btrfs: cleanup tests btrfs/030 and btrfs/034
As recently suggested by Dave Chinner, make use of the new function
named _run_btrfs_util_prog() to run the btrfs util program, and stop
using run_check for running xfs_io - instead filter xfs_io's output
and add it to the golden output.

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:21 +11:00
Filipe David Borba Manana 56c94f468d btrfs: add test for send issuing duplicated rmdir ops
Regression test for btrfs incremental send issue where an rmdir
instruction was sent multiple times for the same target directory.
The number of times depended on the number of hardlinks against
the same inode inside the target directory. That inode must have
had the highest number of all the inodes that were children of the
directory. This made the btrfs receive command fail immediately once
it received the second rmdir instruction.

This issue is fixed by the following linux kernel btrfs patch:

   Btrfs: send, don't send rmdir for same target multiple times

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:21 +11:00
Filipe David Borba Manana 32dba770f8 btrfs: add test for incremental send after dir renames
Regression test for a btrfs incremental send issue related to
renaming of directories. If at the time of the initial send we have
a directory that is a child of a directory with a higher inode
number, and then later after the initial full send we rename both
the child and parent directories, but without moving any of them, a
subsequent incremental send would produce a rename instruction for
the child directory that pointed to an invalid path.  This made the
btrfs receive operation fail.

This issue is fixed by the following linux kernel btrfs patch:

   Btrfs: incremental send, fix invalid path after dir rename

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:21 +11:00
Filipe David Borba Manana 4eb876c371 btrfs: add regression test for incremental send
Test for a btrfs incremental send issue where we end up sending a
wrong section of data from a file extent if the corresponding file
extent is compressed and the respective file extent item has a non
zero data offset.

Fixed by the following linux kernel btrfs patch:

   Btrfs: use right clone root offset for compressed extents

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:20 +11:00
Wang Shilong 8350a0bb05 btrfs/005: log test result to right path
We should log test results to $seqres.full not $seq.full.

Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:20 +11:00
Eric Sandeen 0ab3beb126 xfs: ensure bad primary sb crc fails mount
the commit:
10e6e65 xfs: be more forgiving of a v4 secondary sb w/ junk in v5 fields
broke primary sb CRC validation, not erroring out the mount
if the crc was bad.

This tests that it's fixed, and properly fails the mount on
a bad crc.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:20 +11:00
Eric Sandeen 3698f0930c xfs: check that junk in V4 superblocks doesn't break growfs
Test that we properly ignore old growfs-induced junk in the unused
portion of secondary V4 superblocks; at one point this would
trip up the verifiers, and cause a subsequent growfs to fail.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:18 +11:00
Wang Shilong 617252fc09 btrfs/004: fix to make test really work
So I was wondering why test 004 could pass my previous wrong
kernel patch while it defenitely should not.

By some debugging, i found here perl script is wrong, we did not
filter out anything and this unit test did not work acutally.so
it came out we will never fail this test.

Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:16 +11:00
Mark Tinguely b985883b2c xfs: test setting XFS BMBT fields in xfs_db
Test the setting of the XFS BMBT fields via xfs_db. Runs through the
valid bit values for each field and tests an illegal value.

[dchinner: added _require_xfs_mkfs_crc and turned off crcs so that
the test doesn't just fail on CRC enabled test runs.]

[dchinner: added hex block values to check they don't get endian
swapped.]

Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 21:18:16 +11:00
Filipe David Borba Manana fc3e4e6524 btrfs: add test for data corruption when using compression
Test for a btrfs data corruption when using compressed
files/extents.  Under certain cases, it was possible for reads to
return random data (content from a previously used page) instead of
zeroes. This also caused partial updates to those regions that were
supposed to be filled with zeroes to save random (and invalid) data
into the file extents.

This is fixed by the commit for the linux kernel titled:

   Btrfs: fix data corruption when reading/updating compressed extents
   (https://patchwork.kernel.org/patch/3610391/)

Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 18:04:00 +11:00
Wang Shilong 8564bb8d8b btrfs: add a regression test for running snapshot and send concurrently
Btrfs would fail to send if snapshot run concurrently, this test is to make
sure we have fixed the bug.

Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 17:50:23 +11:00
David Disseldorp 2965c15ea6 btrfs: add new clone overwrite regression test
This test uses the newly added cloner binary to dispatch full file and
range specific clone (reflink) requests.

Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 17:19:34 +11:00
Dave Chinner 0fde5958bb xfs/021: filter v5 filesystem metadata
The xfs_db output is different for v5 filesystem metadata, and so
the test fails due to golden image mismatches rather than an actual
test failure. Improve the filter to hide the differences between the
metadata format outputs.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-18 17:16:34 +11:00