Rename the $RETAIN_AG_BYTES variable to be more generic so that it
reflects the fact that it is designed to retain a certain amount of
extra free space above the default amount in the filesystem when
doing large scratch device testing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
USE_BIG_LOOPFS is really misnamed - it can be used on real devices just as
easily as loop devices. It really means we are testing a large scratch device
and that we should enable the special filesystem filling and checking options
that enable xfstests to be run sanely on large XFS filesystems.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Make it easier to check large filesystems quickly by adding a
--large-fs option to check to turn on shortcuts for large scratch
device filesystem testing.
Also, reject invalid command line options with a usage message.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This patch it to ensure that xfstests passes on non-crc filesystems
with a CRC enabled userspace.
Filter out the mkfs/xfs_info CRC line from tests that capture the
output of these commands.
Filter out new error noise from xfs_repair that occurs for
xfs_repair as a result of the CRC changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Run basic btrfs information commands in various ways, performing
sanity tests of: filesystem show, label, sync, and device stats
(sync is included just because it's simple). These are mostly
just smoke tests, although for example show by label & UUID
should verify that the correct fs was shown.
This also adds quite a few new filters to accommodate the output
of the new commands.
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Now that btrfs has an "-f" arg, we can test that it doesn't
improperly overwrite other filesystems in 032 like we do
for xfs.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We should be able to open device nodes for writing even
if they live on a readonly filesytem.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Run basic btrfs information commands in various ways, performing
sanity tests of: filesystem show, label, sync, and device stats
(sync is included just because it's simple). These are mostly
just smoke tests, although for example show by label & UUID
should verify that the correct fs was shown.
This also adds quite a few new filters to accommodate the output
of the new commands.
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Stefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: <rjohnston@sgi.com>
SCRATCH_DEV_POOL processing actually takes the first
device out for SCRATCH_DEV and leaves the rest in
SCRATCH_DEV_POOL.
I'm not totally sold on that behavior, but for now,
at least don't populate SCRATCH_DEV_POOL with newlines.
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: <rjohnston@sgi.com>
Signed-off-by: <rjohnston@sgi.com>
The path of the syslog writer utility 'logger' is hardcoded and not
always correct, use set_prog_path.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
If we receive an unexpected result from an async write, the error
reporting does not tell the actual number of bytes written. Fix that,
and also a couple of typos in printf's.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Make the porter log cp failure into $seq.full by appending, not overwriting,
which can help debug.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
My earlier patch (xfstests: handle new mkfs.btrfs -f option cleanly)
had a flaw in that if set_prog_path mkfs.btrfs returns nothing,
the grep will hang.
Test for that case to avoid it, and just return the empty string
in that case.
Reported-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
In commit 11c1d79414 "xfstests: Change the diff output of failed
tests", the diff output of a failed test was hardcoded to 10 lines to
avoid overly long output and user can get the full output by manually
running the diff. However this is not always possible and convenient,
eg. in repeated automated tests where the required information is lost
after the test round finished. Then the caputred logs do not contain
enough informatin for analysis.
Introduce the DIFF_LENGTH env variable to tune the diff size, keeping it
10 as deafult and 0 to disable the limit.
Signed-off-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
I added an "-f" option to mkfs.btrfs to force overwrite
of an existing filesystem. Now on an xfstests run, new
mkfs.btrfs requires it, and old mkfs.btrfs cannot accept
it.
So, add a helper which works out whether -f is needed,
and add it to the MKFS_BTRFS_PROG env. var as necessary,
so that it is an always-included option during the tests.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The definition of O_DIRECT in src/trunc.c causes xfstest 125 to fail
when run on a Pandaboard. On ARM, the value used (0x040000) is
O_DIRECTORY rather than O_DIRECT as it is on x86. Prefer the platform's
native definition of O_DIRECT supplied by fcntl.h if available. Also,
fix a couple of error messages to properly reflect their context.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
_within_tolerance strips trailing zeros from the min and max range
values it outputs. This leads to damage if the min or max value is
an integer containing trailing zeros rather than a real number with
a fractional part containing trailing zeros. Xfstest 289 can exhibit
this problem when its input is out of range. Modify the code so it
will only remove trailing zeros found after a decimal point.
V1->V2: Remove decimal points not followed by digits
V2->V3: Per Dave Chinner, simplify by using multiple sed expressions
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
As of Linux 3.9-rc1, ext4 will support the punch operation on file
systems using indirect blocks, but it can not support the fallocate
operation (since there is no way to mark a block as uninitialized
using indirect block scheme). This caused test 255 to fail, since it
only used _require_xfS_io_falloc_punch assuming that all file systems
which supported punch can also support fallocate. Fix this.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Commit 05dadc0 ("Btrfs: add fiemap's flag check") added validity
checks to the fiemap flags and hence invalid flags are now being
rejected. Test 276 passes an invalid fiemap flag to btrfs, and so
that test fails since this commit was added.
Btrfs doesn't support FIEMAP_FLAG_XATTR, which is enabled by -x option
of filefrag, and will fail with
'FIBMAP: Invalid argument'
for 'filefrag -vx'. 'filefrag -vx' fails on btrfs with
'FIEMAP failed with unsupported flags 2'
Remove the '-x' option.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Make the porter log cp failure into $seq.full by appending, not overwriting,
which can help debug.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
In _require_defrag defragmentation command path is fixed. That will
cause that this test case is skipped in some distributions.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
There are many situations where disk may fail for example
1) brutal usb dongle unplug
2) iscsi (or any other netbdev) failure due to network issues
In this situation filesystem which use this blockdevice is
expected to fail(force RO remount, abort, etc) but whole system
should still be operational. In other words:
1) Kernel should not panic
2) Memory should not leak
3) Data integrity operations (sync,fsync,fdatasync, directio) should fail
for affected filesystem
4) It should be possible to umount broken filesystem
Later when disk becomes available again we expect(only for journaled filesystems):
5) It will be possible to mount filesystem w/o explicit fsck (in order to catch
issues like https://patchwork.kernel.org/patch/1983981/)
6) Filesystem should be operational
7) After mount/umount has being done all errors should be fixed so fsck should
not spot any issues.
This test use fault injection (CONFIG_FAULT_INJECTION=y,
CONFIG_FAIL_MAKE_REQUEST=y and CONFIG_FAULT_INJECTION_DEBUG_FS=y config
options) to force all new IO requests to fail for a given device. Xfs
already has XFS_IOC_GOINGDOWN ioctl which provides similar behavior, but it
is fs specific and it does it in an easy way because it performs freeze_bdev()
before actual shutdown.
Test run fsstress in background and then force disk failure.
Once disk failed it check that (1)-(4) is true.
Then makes disk available again and check that (5)-(7) is also true
BE CAREFUL!! test known to cause memory corruption for XFS
see: https://gist.github.com/dmonakhov/4953045
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Dave Chinner
Eric Sandeen
Rich Johnston
Eric Sandeen
David Sterba
Jeff Moyer
Wang Sheng-Hui
Eric Whitney
Theodore Ts'o
Zheng Liu
Dmitry Monakhov