Replace every explicit mount/umount of scratch or test devices with
helper functions. This allows the next patch to add in hooks to these
functions in order to set up & tear down overlayfs on every mount/umount
(also adds _test_unmount(), which didn't exist prior)
[Eryu Guan rebased the patch agains latest master and replaced more
mount/umount with helpers]
Signed-off-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There's a known bug of xfsprogs, when a user or group name beinning
with digits, xfs_quota can't create 'limit' for it.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The mkfs.f2fs has an option to build a certain sized filesystem by giving
the number of sectors.
So, this patch adds to use that.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The helpers introduced in this commit will be used to make btrfs tests that
assume 4k as the page size to work on non-4k page-sized systems as well.
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The xfsprogs libxfs layer implements its own log formatting code to
support utilities that might need to format the log, such as mkfs,
repair, metadump, etc. This code is fairly independent from kernel log
writing code. Therefore, add a test that reformats the log from
userspace with various supported log stripe unit alignments and verifies
that the end result is a correctly formatted log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/077 fails on btrfs progs v4.3:
# ./check generic/077
FSTYP -- btrfs
PLATFORM -- Linux/x86_64 lenovo 4.4.0-rc2_HEAD_1ec218373b8ebda821aec00bb156a9c94fad9cd4_
MKFS_OPTIONS -- /dev/sdb6
MOUNT_OPTIONS -- /dev/sdb6 /var/ltf/tester/scratch_mnt
generic/077 344s ... [failed, exit status 1] - output mismatch (see /var/lib/xfstests/results//generic/077.out.bad)
--- tests/generic/077.out 2015-11-23 17:06:27.144983112 +0800
+++ /var/lib/xfstests/results//generic/077.out.bad 2015-11-23 17:41:25.187062895 +0800
@@ -1,7 +1,5 @@
QA output created by 077
*** create filesystem
-*** set default ACL
-*** populate filesystem, pass #1
-*** populate filesystem, pass #2
-*** all done
+mkfs failed
+(see /var/lib/xfstests/results//generic/077.full for details)
*** unmount
Ran: generic/077
Failures: generic/077
Failed 1 of 1 tests
Reason:
btrfs progs v4.3 use non-mixed blockgroup for small volume as default,
it need at least 100M to build a filesystem.
Fix:
Force mixed mode for small-size fs, to make mkfs success.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently _link_output_file() selects output file suffix based on the
current operating system. Make it more versatile by allowing selection
of output file suffix based on any feature string. The idea is that
in config file ($seq.cfg) there are several lines like:
feat1,feat2: suffix
The function is passed a feature string (or uses os_name,MOUNT_OPTIONS
if no argument is passed) and selects output file with a suffix for
which all features are present in the feature string. If there is no
matching line, output with 'default' suffix is selected.
Update all tests using _link_out_file to the new calling convention.
Signed-off-by: Jan Kara <jack@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Teach _check_dmesg to look for improper RCU usage and circular locking
dependency messages. It's useful to check for these as they might point
to a real problem in the filesystem's implementation (or the current
implementation just confuses the checker, probably worth simplifying
the filesystem's implementation).
Currently the test btrfs/071 for example triggers such warnings:
[ 912.924839] ===============================
[ 912.925617] [ INFO: suspicious RCU usage. ]
[ 912.926394] 4.3.0-rc5-btrfs-next-17+ #1 Not tainted
[ 912.927274] -------------------------------
[ 912.928364] fs/btrfs/volumes.c:1977 suspicious rcu_dereference_check() usage!
[ 912.929626]
[ 912.929626] other info that might help us debug this:
[ 912.929626]
[ 912.931197]
[ 912.931197] rcu_scheduler_active = 1, debug_locks = 1
[ 912.933822] 4 locks held by btrfs/6400:
[ 912.934558] #0: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+...}, at: [<ffffffffa046a193>] btrfs_dev_replace_finishing+0x3e/0x696 [btrfs]
[ 912.948929] #1: (uuid_mutex){+.+.+.}, at: [<ffffffffa046a24a>] btrfs_dev_replace_finishing+0xf5/0x696 [btrfs]
[ 912.950987] #2: (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa046a263>] btrfs_dev_replace_finishing+0x10e/0x696 [btrfs]
[ 912.953265] #3: (&fs_info->chunk_mutex){+.+...}, at: [<ffffffffa046a278>] btrfs_dev_replace_finishing+0x123/0x696 [btrfs]
(...)
[ 912.987973] ======================================================
[ 912.989242] [ INFO: possible circular locking dependency detected ]
[ 912.990583] 4.3.0-rc5-btrfs-next-17+ #1 Not tainted
[ 912.990801] -------------------------------------------------------
[ 912.990801] btrfs/6400 is trying to acquire lock:
[ 912.990801] (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff8119d202>] __blkdev_get+0xa3/0x3d9
[ 912.990801]
[ 912.990801] but task is already holding lock:
[ 912.990801] (&fs_info->chunk_mutex){+.+.+.}, at: [<ffffffffa046a278>] btrfs_dev_replace_finishing+0x123/0x696 [btrfs]
[ 912.990801]
[ 912.990801] which lock already depends on the new lock.
[ 912.990801]
[ 912.990801]
[ 912.990801] the existing dependency chain (in reverse order) is:
(...)
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Put all the reflink/dedupe-related test support routines in a separate
file, then modify the existing reflink tests to use them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/085 was failing on a machine w/o devicemapper kernel
support because it requires the linear target, but didn't
explicitly test for it.
I could have cut & pasted _require_dm_linear(), but chose
to go the route of a generic helper, _require_dm_target $FOO,
because some day someone will need the zero target, the error
target, or who knows.
Add the helper, use it in test generic/085, and convert
_require_dm_flakey, _require_dm_snapshot, and
_dmerror_required with this new helper.
Reported-by: Angelo Dureghello <angelo.dureghello@nomovok.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This test case tests if the device delete works with
the failed (EIO) source device. EIO errors are achieved
usign the DM device.
This test would need following btrfs-progs and btrfs
kernel patch
btrfs-progs: device delete to accept devid
Btrfs: device delete by devid
However when btrfs-progs patch is not found this test will
not run, and when kernel patch is not found btrfs-progs
will fail gracefully and thus the test script.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Controlled EIO from the device is achieved using the dm device.
Helper functions are at common/dmerror.
Broadly steps will include calling _dmerror_init().
_dmerror_init() will use SCRATCH_DEV to create dm linear device and assign
DMERROR_DEV to /dev/mapper/error-test.
When test script is ready to get EIO, the test cases can call
_dmerror_load_table() which then it will load the dm error.
so that reading DMERROR_DEV will cause EIO. After the test case is
complete, cleanup must be done by calling _dmerror_cleanup().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The current _require_meta_uuid() test looks for a failure return
code from xfs_db -x -c "uuid generate" but in fact this exits
with success. (In fact uuid_f always exits with success; perhaps
this needs fixing, but that's in the wild now).
So grep for the string(s) stating that it failed, instead.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs/020 need -f option, or it'll be fail on 4k sector device.
Add -f option for xfs/032 for safe and better.
There're some cases use _check_xfs_filesystem(), or others
function which call this function to check a regular file.
That's will fail when the regular file on a 4k sector device.
For example xfs/250.
So I change _check_xfs_filesystem(), add -f option to xfs_repair,
when the $device is a file.
Signed-off-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Targeted fuzzing tests which destroy various pieces of filesystem or
allocation group metadata; the tests look for (a) kernel detection of
corruption, (b) xfs_repair repair of said corruption, and (c)
post-repair fs usability.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Targeted fuzzing tests which destroy various pieces of filesystem or
block group metadata; the tests look for (a) kernel detection of
corruption, (b) e2fsck repair of said corruption, and (c) post-repair
fs usability.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In _count_extents and _count_holes, the output of 'xfs_io -c "fiemap"'
is saved in var res, but the following "echo $res" will merge the
original output into one line. e.g.
0: [0..63]: 96..159
1: [64..127]: hole
will be
0: [0..63]: 96..159 1: [64..127]: hole
so the extent count is always 0 if there's a hole.
This makes generic/046 fail occasionally. (Seems it's easier to
reproduce when the system is under some presure, e.g. with fsstress
running.)
Tested the new _count_extents and _count_holes with generic/04[3-9] and
tests all passed as expect.
Reported-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When running ./check and calling a test with a name, id is enough
to find the test (names added in 03c633bf).
If the full test path is tests/xfs/123-foo-bar, then all these
invocations should work, as long as the given part of the test name
is valid and the three-digits id is here.
./check xfs/123-foo-bar
./check xfs/123-foo
./check xfs/123
Always use full test name in results.
Signed-off-by: Jan Tulak <jtulak@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Tests xfs_db's ability to change & restore UUIDs on V5 filesystems,
and tests xfs_copy's ability to change the UUID on the copy.
Update to _filter_uuid is so that it will catch the UUID output
from xfs_admin -u, which is slightly different than the regexp it
was expecting.
This requires new userspace which knows how to change the UUID on
a V5 superblock.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS had a regression where inode reclaim in the unlink codepath would
not correctly tear down extended attribute forks where no xattr extents
are present. Add a generic test to create this condition.
The test sets extended attributes on a series of files under ENOSPC
conditions and then verifies that the files can be removed without
syslog warnings or errors.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Introduce a parameter to _check_dmesg which allows callers to provide a
customized filter function to filter out intentional dmesg logs. The
default filter is a simple 'cat' command.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS dynamic inode allocation has a fundamental limitation in that an
inode chunk requires a contiguous extent of a minimum size. Depending on
the level of free space fragmentation, inode allocation can fail with
ENOSPC where the filesystem might not be near 100% usage.
The sparse inodes feature was implemented to provide an inode allocation
strategy that maximizes the ability to allocate inodes under free space
fragmentation. This test fragments free space and verifies that
filesystems that support sparse inode allocation can allocate a minimum
percentage of inodes on the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/019 was failing with:
./tests/generic/019: line 65: /sys/block/pmem0p2/make-it-fail: No such file or directory
When using a partition, the file needed is located at
/sys/block/pmem0/pmem0p2/make-it-fail.
Rather than attempt to deduce whether a block device is a partition
or not, use the symlinks located in /sys/dev/block/ to find the right
location for the make-it-fail file.
Also change btrfs/088 to use the new _sysfs_dev function.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Eric Sandeen
Zorro Lang
Jaegeuk Kim
Chandan Rajendra
Brian Foster
Zhao Lei
Jan Kara
Jan Kara
Filipe Manana
Darrick J. Wong
Eric Sandeen
Anand Jain
Eric Sandeen
Eryu Guan
Jan Tulak
Matthew Wilcox