The test shared/243 really is ext4 specific even though currently we
would run it on other file systems as well, it would not actually do any
testing.
So move it to ext4 specific directory and rename it to 002.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are couple of tests in shared directory which really should be
made generic, so move it. It is mostly collapse range tests, which
really can be generic to make super we test every file system which adds
collapse range support.
Here is what we're moving in this commit.
shared/001 -> generic/021
shared/002 -> generic/022
shared/003 -> generic/012
shared/004 -> generic/016
shared/005 -> generic/017
shared/218 -> generic/018
shared/305 -> generic/019
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Test fs by using up all inodes and check fs.
Also a regression test for xfsprogs commit
d586858 xfs_repair: fix sibling pointer tests in verify_dir2_path()
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On old kernel we return EINVAL if hit the limits of maximum number of
ACLs but return E2BIG on new kernel, which cause the test failes on new
kernel as the output is mismatch to the goldens. This patch fix it by
updating the golden output with the new error message and replacing the
old error message with it via a filter.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We execute collapse range multiple times on same file. Each
collapse range call collapses a single alternate block. After the
test execution, file will be left with 80 blocks and as much number
of extents. We also check for file system consistency after the
completion.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
shared/004 tries to test various corner cases with delayed extents
and pre-existing holes for fcollapse range functionality over
different type of extents.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
shared/003 tries to test various corner cases with pre-existing holes
for fcollapse range functionality over different type of extents.
Signed-off-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
shared/002 tries to test various corner cases with delayed extents
for fcollapse range functionality over different type of extents.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Ashish Sangwan <a.sangwan@samsung.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
CRCs always enabled 32 bit project inodes and attr2 formats, hence
they cannot be turned off. Add new require rules for the tests that
require attr and 16 bit project IDs so these tests are avoided on
CRC enabled filesystems.
Also, add a xfs_db write check so that we can avoid tests that are
dependent on xfs_db modifying filesystem structures as they will
fail on CRC enabled filessystems right now. This is just temporary
until full write xfs_db support is available.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
For historical reasons beyond my knowledge xfstests tries to abuse the
scratch device as test device for nfs and udf. Because not all test
have inherited the right usage of the _setup_testdir and _cleanup_testdir
helpers this leads to lots of unessecary test failures.
Remove the special casing, which gets nfs down to a minimal number of
failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Sugned-off-by: Dave Chinner <david@fromorbit.com>
Now in tests/ there are some test cases whose mode is 0644. But they
should be 0755. So fix it.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Reviewed-by: Dave Chinner <david@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
fix shared/298:
* don't include common/config, not needed and breaks
stuff when $SCRATCH_DEV_POOL is defined:
Error: $SCRATCH_DEV should be unset when $SCRATCH_DEV_POOL is set
* make sure xfs_io has fiemap, we'll need it
* add -F to the xfs_io invocation, again, for use on
old xfsprogs on non-xfs filesystems
* ignore ENOSPC errors from "garbage" loop; the only goal
is to fill it, ENOSPC doesn't matter.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
After finished test, temporarily fio config file should be removed.
This commit tries to fix this problem in the following test cases:
- generic/299-300
- ext4/301-304
- shared/305
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The -F flag to xfs_io originally enabled it to operate on non-xfs
filesystems. This restriction was removed upstream in favor of
gracefully failing on the handful of operations that actually
required xfs, and the option was deprecated.
However, xfstests is still used on distros with older xfsprogs, and
so "xfs_io -F" was necessary throughout xfstests.
Simplify this by appending -F to XFS_IO_PROG when it's needed -
i.e. if we're using old xfsprogs on a non-xfs filesystem.
This will eliminate errors when new tests leave out the -F, and
if and when -F is finally removed, there will be one central
location in xfstests to update.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
xfstests have some change on the organization of the testcases
and common* files:
* The common* scripts have been reorganized into the common/ dir.
* The testcases have been reorganized into sub test dirs under tests/.
* The run.* scripts have been removed.
This patch uses the simple way to make install support above changes:
Make up one Makefile for each newly created subdirs, which can control
'make install' separately.
v2 introduces the following changes compared with v1:
* Ignore the file 'group' under the top dir, for it's useless in the new
structures.
* Remove the redundant comments in the Makefiles.
* Use XXX_DIR instead of XXX_SUBDIR in the Makefiles under common/ and tests/.
* Export TESTS_DIR in teh top level Makefile instead of tests/Makefile.
* Obtain the names of dirs for testcases by iterating sub dirs under /tests,
not by enumeration in tests/Makefile.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com Minor modification to Makefile]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Some tests 'cd <somedir>' and then direct output to $RESULT_DIR,
which fails if the current working directory is not $here.
Regardless, if an external results directory is to be used it needs
to have a full path specified and the use of $here as the base of
the results files is completely incorrect.
Hence change all the $here/$seqres* references to simply be
$seqres*, and instead encode the full path to the results in
$RESULT_DIR.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' tests/*/*
will do most of the work automatically.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
These are tests that are shared between multiple filesystems (moved
to shared), and udf/btrfs/ext4 specific tests, moved to appropriate
directories.
I created the "shared" directory to indicate tests that are not
truly generic, but also not filesystem specific. They might rely on
a feature that is only implmented in a few filesystems and so can't
be truly generic.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Lukas Czerner
Eryu Guan
Jie Liu
Namjae Jeon
Dave Chinner
Christoph Hellwig
Zheng Liu
Eric Sandeen
Wang Sheng-Hui
Rich Johnston