Introduce two pre-checkup routines _require_xfs_mkfs_crc as well
as _require_xfs_crc to verify if mkfs.xfs and kernel are have crc
feature or not.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Move of tests into separate subdirectories broke sed(1) expression in
_check_udf_filesystem(). Actually use of sed in that place was rather
stupid so just replace it with plain echo.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ben Myers <bpm@sgi.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This is just a simple patch to get the tmpfs working as a target file
system. The patch copies the way nfs is handled in xfstests.
I didn't change the xfstests logic to recognize a proper SCRATCH_DEV.
Hence, the SCRATCH_DEV for tmpfs should be in nfs form (with ':' sign
in it) in order for this to work properly.
Signed-off-by: Boris Ranto <branto@redhat.com>
Signed-off-by: Junho Ryu <jayr@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Btrfs had some issues with fsync()'ing directories and fsync()'ing
after renames. These three new tests cover the 3 different issues
we were seeing. This breaks out the dmflakey stuff into a common
helper to be shared between generic/311 and this new test.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For historical reasons beyond my knowledge xfstests tries to abuse the
scratch device as test device for nfs and udf. Because not all test
have inherited the right usage of the _setup_testdir and _cleanup_testdir
helpers this leads to lots of unessecary test failures.
Remove the special casing, which gets nfs down to a minimal number of
failures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Sugned-off-by: Dave Chinner <david@fromorbit.com>
_filter_mkfs is a filter so that it should read from stdin first
before printing anything out. Otherwise the command prior to the
pipeline may get EPIPE.
I saw this when testing extN with generic/204, _scratch_mkfs_sized was
unable to create fs because of EPIPE, then _scratch_mount failed.
generic/204 12s ... [failed, exit status 1] - output mismatch (see /root/xfstests/results//generic/204.out.bad)
--- tests/generic/204.out 2013-11-01 16:47:56.728591856 +0800
+++ /root/xfstests/results//generic/204.out.bad 2013-11-01 22:52:53.207828779 +0800
@@ -1,2 +1,7 @@
QA output created by 204
-*** done
+mount: wrong fs type, bad option, bad superblock on /dev/sda6,
+ missing codepage or helper program, or other error
+ In some cases useful info is found in syslog - try
+ dmesg | tail or so
+
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Various tests opencode checks to find out the minimum support direct I/O
size. Replace those with a generic helper that handles network filesystems as
well. Also remove the Linux 2.4 workaround we had in once place.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Added -P option to $DF_PROG and changed the invocation of
'df' command in generic/{251,260,273,275} testcases
with $DF_PROG.
Otherwise the testcases will fail if the scratch
device has a long name (for example, if it's an LVM volume).
Because df outputs its usage stats with two lines:
/dev/mapper/xfstests-disk1
3030800 4608 2868908 1% /tmp/mnt/disk1
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We just want to remove "block device" in _filter_ro_mount(), so add
"mount:" back.
Add one more call of _filter_ro_mount() in xfs/200 to match 200.out.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
generic/317 and 318 need /proc/<pid>/[uid_map|gid_map], test fail on
older kernels without that support.
Add a _require_ugid_map() function and called by 317 and 318.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
I've been periodically failing btrfs/003 because my box sometimes takes a little
longer to unregister the device when we remove it and so the output from btrfs
dev show doesn't match what we are wanting since it still sees the device. To
fix this just stat and sleep if we still see the device node and only continue
once udev or whatever actually removes the device node so that we don't get
random failures.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We changed btrfs device add to check and see if there is an existing fs on the
device we are adding, so you now have to do -f if you want to do this. In order
to get around checking to see if we have this version of btrfs-progs just wipefs
the device we're adding to make sure the device add will pass no matter which
version of btrfs-progs you have. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Long device names may be split onto their own line
on quota output:
Filesystem Blocks Quota Limit Warn/Time Mounted on
/dev/mapper/my-very-very-very-long-devicename
48M 0 0 00 [------] /mnt/scratch
which breaks tests that capture quota output - currently,
only xfs/108.
Add a _filter_quota() which fixes this.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The mount binary changed its output w.r.t. red-only devices, and
stopped referring to a "block device."
This broke at least test xfs/200; add a common filter to remove
the "block device" from older mount binary output, and change
the 200.out file to match.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Starting from util-linux v2.23 fstrim(1) reports trimmed bytes
differently, e.g.
new fstrim: /mnt/ext4: 9.7 GiB (10411118592 bytes) trimmed
old fstrim: /mnt/ext4: 10411118592 bytes were trimmed
generic/260 reports syntax error
+./tests/generic/260: line 111: [: 9.7: integer expression expected
+./tests/generic/260: line 121: [: 9.7: integer expression expected
+./tests/generic/260: line 183: [: 9.7: integer expression expected
Add a new filter called _filter_fstrim in common/filter and get the
correct trimmed bytes in generic/260, so the test passes with both old
and new fstrim.
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
With coreutils v8.16 the style of apostrophes changed from `word' to
'word'. This is breaking some tests which use the older form.
This commit introduces function changes the golden output of the
affected tests and introduces a filter for the older style output.
[dchinner: modified to use a global filter in check rather than
per-test filters]
[rjohnston: minor comment change]
Signed-off-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
_scratch_mkfs_sized requires an integer number of bytes
as input; if it's given something else, catch it and _notrun.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Otherwise it fails with ENOSPC on CRC enabled filesystems because
of the larger inode size.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The XFS implementation of _scratch_mkfs_sized ignores MKFS_OPTIONS
when a custom block size is set and so isn't testing things like
CRCs on such sized filesytsems. Fix this by ensuring we don't try to
override the block size is it is set in MKFS_OPTIONS. xfs/204 shows
this problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The current code incorrectly gets block size information from $TEST_DEV
instead of from $TEST_DIR. This returns the block size of the filesystem
hosting the device file rather than that of the filesystem on $TEST_DEV.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The btrfs-progs tools changed the output:
- 100GiB instead of 100GB
xfstest btrfs/006 is one that failed due to this change.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test performs btrfs device replace tests with all possible profiles
(single/dup/mixed/raid0/raid1/raid10), one round with the '-r' option
to 'btrfs replace start' and one round without this option. The
cancelation is tested only once and with the dup/single profile for
metadata/data.
This test takes 181 seconds on my SSD equiped test box and 237s on
spinning disks. Almost all the time is spent when the filesystem is
populated with test data. The replace operation itself takes less than
a second for all the tests, except for the test that is marked as
'thorough' which will run for about 8 seconds on my test box.
The amount of tests done depends on the number of devices in the
SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should
be available (e.g. 5 partitions). With less than 2 entries in
SCRATCH_DEV_POOL, the test is not executed.
The source and target devices for the replace operation are arbitrarily
chosen out of SCRATCH_DEV_POOl. Since the target device mustn't be
smaller than the source device, the requirement for this test is that
all devices have _exactly_ the same size. If this is not the case, the
test terminates with _notrun.
To check the filesystems after replacing a device, a scrub run is
performed, a btrfsck run, and finally the filesystem is remounted.
This commit depends on my other commit:
"xfstest: don't remove the two first devices from SCRATCH_DEV_POOL"
[rjohnston: renumbered to btrfs/011]
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
One problem was the output of "uniq -c" which added spaces depending
on the size of the count value (e.g. one space less for 10+ devices).
The second problem was that "btrfs fi show" was doing the same:
"devid %4llu size %s used %s path %s".
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Since common/config is executed twice, if SCRATCH_DEV_POOL is configured
via the environment, the current code removes the first device entry twice
which means that you lose the second device for the test.
The fix is to not remove anything from SCRATCH_DEV_POOL anymore.
That used to be done (I can only guess) to allow to pass the
SCRATCH_DEV_POOL as an argument to _scratch_mkfs. Since _scratch_mkfs adds
the SCRATCH_DEV, the pool mustn't contain that device anymore.
A new function _scratch_pool_mkfs is introduced that does the expected
thing.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Jie Liu
Jan Kara
Boris Ranto
Josef Bacik
Christoph Hellwig
Eryu Guan
Stanislav Kholmanskikh
Eric Sandeen
Tomas Racek
Dave Chinner
chandan
Stefan Behrens