fstests only supports Linux, so get rid of this unnecessary predicate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Let's see if we can prevent fs corruption warnings by flushing dirty
data to disk before the test ends.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zorro Lang <zlang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
This test has been on and off my bad list for many years due to the fact
that it will spew potentially millions of "No space left on device"
errors if the file count calculations are wrong. The calculations
should be correct for the XFS data device, but they don't apply to other
filesystems.
Therefore, filter out the ENOSPC messages when the files are not going
to be created on the xfs data device (e.g. ext4, xfs realtime, etc.)
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Use the available block count to compute the number of files we think
we can create, rather than hardcoding a particular size. This fixes
the ENOSPC failures for xfs filesystems with rmap/reflink support.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eryu Guan <eguan@redhat.com>
_scratch_mkfs_sized will create a filesystem of the given size, and
call _notrun and exit if current $FSTYP doesn't support sized mkfs.
But when it's called in a pipe, the exit in _notrun only exits from
the subshell created by the pipe not the test itself, and test
continues to run unnecessarily, though the test is still reported as
[notrun] due to existence of $seqres.notrun file.
Fix it by not calling _scratch_mkfs_sized in a pipe, but dumping the
output to a tmp file, which will be fed to _filter_mkfs later.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
We're going to need a bigger log for rmap & reflink on XFS, so
increase the size of the log and the fs appropriately.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
On v4/512b and v5/1k xfs, there're not enough free inodes for new files
and generic/204 fails because of running out of inode not space.
Adding "-i maxpct=50" to MKFS_OPTIONS to bump up the inode limit at mkfs
time, and test could pass on all configurations.
Suggested-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
5e8b9e6 btrfs: add regression test for remount with thread_pool resized
did weird things to _filter_mkfs; aside from broken indentation,
it also short-circuited the default non-xfs behavior, which was to
emit a default block & inode size. And that was all because btrfs/082
was using _filter_mkfs & not redirecting output away as per normal.
Granted, it's not super clear that _filter_mkfs serves this rather
unique purpose, but anyway...
And, while having this default seems to be of questionable value,
not emitting *anything* led to this on btrfs:
+./tests/generic/204: line 76: space / (isize + dbsize): division by 0 (error token is ")")
because those variables don't get set for btrfs, thanks to the
above commit.
So take out the use of _filter_mkfs in btrfs/082, and take out the
munging of _filter_mkfs which broke generic/204, and get things back
to something semi-sane.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There are about 198 tests which requires scratch_dev, but does not check
the file system consistency afterwards. Xfstests infrastructure does not
do it automatically, so fix it by running _check_scratch_fs() after
each test that _require_scratch.
Also remove all the _check_scratch_fs() calls that are not actually needed
and will be covered by the check script.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
On small block size filesystems, the reserve pool size is kept
constant at 4MB. filesystems with smaller blocks use comparitively
more blocks for indexing metadata (e.g. in the inode and extent
btrees) and so having a higher indirect block usage. Hence we need
to leave the reserve pool at 1024 block and not scale it for a
constant size.
This makes the test pass on a filesystem made with MKFS_OPTIONS="-b
size=1024 -m crc=1".
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/204 fails on device with Advanced Format of 4096 bytes per
physical sector and when partition starts at the 4K boundary/./In
this case filesystem sector/block size will be of 4096 bytes size
and _scratch_mkfs_sized fails because mkfs reports that 5Mb log size
is not enough to create a filesystem, for example attempt to make
filesystem on such partition:
mkfs.xfs -f -bsize=4096 -l size=5m -d size=109051904 /dev/sdb2"
results to:
"log size 1280 blocks too small, minimum size is 1605 blocks"
and generic/204 fails with ENOSPC before it has finished creating
the necessary files. Log size of 7MB is enough for this test to pass.
Signed-off-by: Alexander Tsvetkov <alexander.tsvetkov@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In changing the default log sizes in mkfs, the freespace
calculations in generic/204 are no longer valid and so it fails with
ENOSPC before ti has finished creating the necessary files.. Make
the test use a fixed log size of 5MB for XFS so that freespace
calculations remain valid and the test passes regardless of whether
we have a new or old mkfs binary.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Otherwise it fails with ENOSPC on CRC enabled filesystems because
of the larger inode size.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
The XFS implementation of _scratch_mkfs_sized ignores MKFS_OPTIONS
when a custom block size is set and so isn't testing things like
CRCs on such sized filesytsems. Fix this by ensuring we don't try to
override the block size is it is set in MKFS_OPTIONS. xfs/204 shows
this problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Because if it corrupts the filesystem it currently goes undetected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Introduce a top level common directory and move all the common.*
files into it. Because there is now a directory named common, the
prefix can be dropped from all the files. Convert all the tests to
use this new directory for including common files.
for f in common.*; do \
git mv `echo -n "$f " ; echo $f | sed -e 's;n\.;n/;'` \
done
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Essentially the change is simply this. Converting:
... >> $seq.????
to:
.... >> $RESULT_DIR/$seq.????
so that output files are directed to the defined output directory.
sed to the rescue:
$ sed -i -e '/^seq=.*$/a seqres=$RESULT_DIR/$seq' -e 's/seq.full/seqres.full/' tests/*/*
will do most of the work automatically.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Phil White <pwhite@sgi.com>
[rjohnston@sgi.com reworked for TOT changes]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>