This test case will first use fsstress to fill a file system, then
dump it to standard output and restore it from standard input, finally
check that the original contents and the new contents generated by
restore tool will be same.
Signed-off-by: Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use appropriate environment variable (XFSDUMP_PROG) instead of
hardcoding 'xfsdump' name. Also make the test fail graciously when
xfsdump isn't installed.
We also make XFSDUMP_PROG be equal to empty string instead of -e when
xfsdump isn't installed. The changes require some tweaking to output
filtering since full command path now appears in the output.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Testing if FSSTRESS_PROG is a null string dosen't make sense because
it has just been set.
Here fix it by testing if it is an executable file.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pass -cifs argument from the command line to enable cifs testing
for $TEST_DEV. Also mention CIFS and missed UDF in README.
Signed-off-by: Pavel Shilovsky <pshilovsky@samba.org>
Reviewed-by: Steve French <smfrench@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously, xfstests checked for chacl in only a few hard-coded
directory: /bin, /sbin, and /usr/bin. Use set_prog_path to allow
chacl to be in any directory in $PATH, which is how we find the
executable path for most other executables.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With the new config stuff we lost the selinux options being set for systems with
selinux turned on. We want the selinux context set all the time, wether we
provide a MOUNT_OPTIONS value or not, so take this logic out of _mount_opts()
and just put it in the body of common/config
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
All commands run as $qa_user should use a relative path so that
missing access permissions on $HOME for root don't prevent running
it. This fixes common/233 for me.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Functions like _mount_opts(), _mkfs_opts() and _fsck_opts() are
defined both in common/rc and common/config while used only in
common/config.
Remove those functions from common/rc and update _mount_opts() to match
the superior version of the function.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently there is a problem with parse_config_section() when the
configuration value contains equality sign like this for example:
MOUNT_OPTIONS="-o data=journal"
the result will be
export MOUNT_OPTIONS="-o data="journal"
which is not going to work. The reason is that the expression used to
parse the configuration options uses greedy matching '.*'. Fix this by
using non greedy expression to match the first equality sign '[^=]'.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently if the FSTYP is not set, the code to get FSTYP using blikd
would not work. This is because we're using HOSTOS environment variable
which might not be set (at least not on my system) and because it's
already late in the code path.
Fix this by using OSTYP environment variable as a fallback in the case
that HOSTOS does not work and move the check to common/config.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
In the case that we already have sections in the config file we
have to make sure that we unset SCRATCH_DEV if it has been deduced from
the SCRATCH_DEV_POOL so that it does not complain about SCRATCH_DEV in
this case.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
With changes introduced in 667308dd97
it is no longer possible to use SCRATCH_DEV_POOL variable because of
error:
common/config: Error: $SCRATCH_DEV should be unset when
$SCRATCH_DEV_POOL is set
This was because get_next_config() would get called twice and hence it
would complain on the second run that SCRATCH_DEV is already set. Fix
it by making sure that we call get_next_config() only once if there
are no sections in the config file.
Also make sure that we export SCRATCH_DEV in the case we're deducing it
from SCRATCH_DEV_POOL.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Filipe David Manana <fdmanana@gmail.com>
Tested-by: Filipe David Manana <fdmanana@gmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add config option RECREATE_TEST_DEV to allow to recreate file system on
the TEST_DEV device. Permitted values are true and false.
If RECREATE_TEST_DEV is set to true the TEST_DEV device will be
unmounted and FSTYP file system will be created on it. Afterwards it
will be mounted to TEST_DIR again with the default, or specified mount
options.
Also recreate the file system if FSTYP differs from the previous
section.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch add support for sections in the config file. Each section can
contain configuration options in the format
OPTION=value
when one section is processed xfstests will proceed to next section
until all secitons are processed, or an error occur.
The name of the section can consist of alphanumeric characters + '_',
nothing else is allowed. Name of the section is also used to create
results subdirectory for each section. After all the sections are
processed summary of all runs is printed out.
If the config file does not contain sections, or we're not using config
file at all, nothing is changed and xfstests will work the same way as
it used to.
This is very useful for testing file system with different options. Here
is an example of the config file with sections:
[ext4_4k_block_size]
TEST_DEV=/dev/sda
TEST_DIR=/mnt/test
SCRATCH_DEV=/dev/sdb
SCRATCH_MNT=/mnt/test1
MKFS_OPTIONS="-q -F -b4096"
FSTYP=ext4
[ext4_1k_block_size]
MKFS_OPTIONS="-q -F -b1024"
[ext4_nojournal]
MKFS_OPTIONS="-q -F -b4096 -O ^has_journal"
[ext4_discard_ssd]
MKFS_OPTIONS="-q -F -b4096"
TEST_DEV=/dev/sdc
SCRATCH_DEV=/dev/sdd
MOUNT_OPTIONS="-o discard"
Note that once the variable is set it remains set across the sections, so
you do not have to specify all the options in all sections. However one
have to make sure that unwanted options are not set from previous
sections.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Added -P option to $DF_PROG and changed the invocation of
'df' command in generic/{251,260,273,275} testcases
with $DF_PROG.
Otherwise the testcases will fail if the scratch
device has a long name (for example, if it's an LVM volume).
Because df outputs its usage stats with two lines:
/dev/mapper/xfstests-disk1
3030800 4608 2868908 1% /tmp/mnt/disk1
Signed-off-by: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
We changed btrfs device add to check and see if there is an existing fs on the
device we are adding, so you now have to do -f if you want to do this. In order
to get around checking to see if we have this version of btrfs-progs just wipefs
the device we're adding to make sure the device add will pass no matter which
version of btrfs-progs you have. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
With coreutils v8.16 the style of apostrophes changed from `word' to
'word'. This is breaking some tests which use the older form.
This commit introduces function changes the golden output of the
affected tests and introduces a filter for the older style output.
[dchinner: modified to use a global filter in check rather than
per-test filters]
[rjohnston: minor comment change]
Signed-off-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test performs btrfs device replace tests with all possible profiles
(single/dup/mixed/raid0/raid1/raid10), one round with the '-r' option
to 'btrfs replace start' and one round without this option. The
cancelation is tested only once and with the dup/single profile for
metadata/data.
This test takes 181 seconds on my SSD equiped test box and 237s on
spinning disks. Almost all the time is spent when the filesystem is
populated with test data. The replace operation itself takes less than
a second for all the tests, except for the test that is marked as
'thorough' which will run for about 8 seconds on my test box.
The amount of tests done depends on the number of devices in the
SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should
be available (e.g. 5 partitions). With less than 2 entries in
SCRATCH_DEV_POOL, the test is not executed.
The source and target devices for the replace operation are arbitrarily
chosen out of SCRATCH_DEV_POOl. Since the target device mustn't be
smaller than the source device, the requirement for this test is that
all devices have _exactly_ the same size. If this is not the case, the
test terminates with _notrun.
To check the filesystems after replacing a device, a scrub run is
performed, a btrfsck run, and finally the filesystem is remounted.
This commit depends on my other commit:
"xfstest: don't remove the two first devices from SCRATCH_DEV_POOL"
[rjohnston: renumbered to btrfs/011]
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Since common/config is executed twice, if SCRATCH_DEV_POOL is configured
via the environment, the current code removes the first device entry twice
which means that you lose the second device for the test.
The fix is to not remove anything from SCRATCH_DEV_POOL anymore.
That used to be done (I can only guess) to allow to pass the
SCRATCH_DEV_POOL as an argument to _scratch_mkfs. Since _scratch_mkfs adds
the SCRATCH_DEV, the pool mustn't contain that device anymore.
A new function _scratch_pool_mkfs is introduced that does the expected
thing.
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de>
Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This commit adds the possibility to specify RESULT_BASE directory from
the config file, or with environment variable. The default remains the
same "$here/results/".
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Move configuration initialization into a function so we can re-read it
without the need to reinclude the common/config file which would be
ugly. This is in preparation for adding support for sections into config
files.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Currently we do not export some of the important variables in
common/config. Fix this.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This test sets up a dm flakey target and then runs my fsync tester I've been
using to verify btrfs's fsync() is working properly. It will create a dm flakey
device, mount it, run my test, make the flakey device start dropping writes, and
then unmount the fs. Then we mount it back up and make sure the md5sums match
and then run fsck on the device to make sure we got a consistent fs. I used the
output from a run on BTRFS since it's the only one that passes this test
properly. I verified each test manually to make sure they were in fact valid
files. XFS and Ext4 both fail this test in one way or another.
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Rich Johnston <rjohnston@sgi.com>
[rjohnston@sgi.com changed syncfs() to sync() for older kernels]
Signed-off-by: Rich Johnston <rjohnston@sgi.com>
Xiaoguang Wang
Jan Kara
Wang Shilong
Theodore Ts'o
Pavel Shilovsky
Josef Bacik
hch@infradead.org
Lukas Czerner
Stanislav Kholmanskikh
Josef Bacik
Tomas Racek
Stefan Behrens
Rich Johnston