Update auto-benchmark stuff to remove assumptions about xfs as the only fs

bench

@@ -49,6 +49,7 @@
 # creator
 owner=nathans@sgi.com
 
+iam=bench
 tmp=/tmp/$$
 here=`pwd`; export here
 status=1	# failure is the default!
@@ -97,7 +98,7 @@ _run_benchmark()
     while [ $pass -le $passes -o $passes -lt 0 ]
     do
         _log "        *** clean scratch device [$bench starting, pass $pass]"
-        _scratch_mkfs_xfs 2>&1 | _fix_malloc >>$FULL
+        _scratch_mkfs 2>&1 | _fix_malloc >>$FULL
         _log "        *** mounting scratch device"
         _scratch_mount      || _fail "            !!! failed to mount"
         
@@ -166,7 +167,9 @@ FULL_MKFS_OPTIONS=`_scratch_mkfs_options`
 FULL_MOUNT_OPTIONS=`_scratch_mount_options`
 
 # $OUT is the report which will ultimately be sent, keep it tidy.
-cat >$OUT <<EOF
+rm -f $OUT
+[ -z "$FSTYP" ] || echo "FS_TYPE       -- $FSTYP" >>$OUT
+cat >>$OUT <<EOF
 MKFS_OPTIONS  -- $FULL_MKFS_OPTIONS
 MOUNT_OPTIONS -- $FULL_MOUNT_OPTIONS
 
@@ -174,7 +177,7 @@ EOF
 
 for bench in $benches
 do
-    echo "" >$FULL
+    echo "" >>$FULL
     echo "" >$LOG
     _log "*** benchmark started [passes=$passes, benchmark=$bench]"
     _log "*** (`date`)"

common.config

@@ -52,8 +52,8 @@
 # RMT_IRIXTAPE_DEV	- the IRIX remote tape device for the xfsdump tests
 # RMT_TAPE_USER		- remote user for tape device
 #
-
-#
+# - These can be added to known_hosts() below or a separate local
+#   configuration file can be used (using the HOST_OPTIONS variable).
 # - This script is shared by the stress test system and the auto-qa
 #   system (includes both regression test and benchmark components).
 # - TEST_DEV & TEST_DIR must be assigned.
@@ -71,6 +71,7 @@ SOAK_PROC=3		# -p option to fsstress
 SOAK_STRESS=10000	# -n option to fsstress
 SOAK_PASSES=-1		# count of repetitions of fsstress (while soaking)
 EMAIL=root@localhost	# where auto-qa will send its status messages
+export HOST_OPTIONS=${HOST_OPTIONS:=local.config}
 export MKFS_OPTIONS=${MKFS_OPTIONS:=-bsize=4096}
 export MOUNT_OPTIONS=${MOUNT_OPTIONS:=-ologbufs=2}
 export CHECK_OPTIONS=${CHECK_OPTIONS:="-g auto"}
@@ -80,8 +81,10 @@ export BENCH_PASSES=${BENCH_PASSES:=5}
 export MALLOCLIB=${MALLOCLIB:=/usr/lib/libefence.a}
 export LOCAL_CONFIGURE_OPTIONS=${LOCAL_CONFIGURE_OPTIONS:=--enable-readline=yes}
 
-case "$HOST"
-in
+known_hosts()
+{
+	case "$HOST"
+	in
 	    bruce)
 		MODULAR=0
 		EMAIL="nathans@larry"
@@ -205,7 +208,7 @@ in
 		SCRATCH_MNT=/mnt/scratch
 		TAPE_DEV=/dev/st0
 		RMT_TAPE_DEV=longhorn:/dev/tape
-#	RMT_IRIXTAPE_DEV=longhorn:/dev/tape
+		# RMT_IRIXTAPE_DEV=longhorn:/dev/tape
 		RMT_TAPE_USER=guest
 		;;
 	    lab343)
@@ -219,10 +222,17 @@ in
 		SCRATCH_MNT=/qa/scratch
 		;;
 	    *)
-	echo "common.config: Error: need to define parameters for host $HOST"
+		echo "Error: need to define parameters for host $HOST"
 		exit 1
 		;;
-esac
+	esac
+}
+
+if [ -f "$HOST_OPTIONS" ]; then
+    source "$HOST_OPTIONS"
+else
+    known_hosts
+fi
 
 if [ ! -b "$TEST_DEV" ]
 then

common.rc

@@ -74,7 +74,8 @@ _test_mount()
         TEST_OPTIONS="$TEST_OPTIONS -ortdev=$TEST_RTDEV"
     [ "$USE_EXTERNAL" = yes -a ! -z "$TEST_LOGDEV" ] && \
         TEST_OPTIONS="$TEST_OPTIONS -ologdev=$TEST_LOGDEV"
-    mount -t xfs $TEST_OPTIONS $MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
+    [ -z "$FSTYP" ] && FSTYP=xfs
+    mount -t $FSTYP $TEST_OPTIONS $MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR
 }
 
 _scratch_mount_options()
@@ -94,7 +95,8 @@ _scratch_mount()
         SCRATCH_OPTIONS="$SCRATCH_OPTIONS -ortdev=$SCRATCH_RTDEV"
     [ "$USE_EXTERNAL" = yes -a ! -z "$SCRATCH_LOGDEV" ] && \
         SCRATCH_OPTIONS="$SCRATCH_OPTIONS -ologdev=$SCRATCH_LOGDEV"
-    mount -t xfs $SCRATCH_OPTIONS $MOUNT_OPTIONS $* $SCRATCH_DEV $SCRATCH_MNT
+    [ -z "$FSTYP" ] && FSTYP=xfs
+    mount -t $FSTYP $SCRATCH_OPTIONS $MOUNT_OPTIONS $* $SCRATCH_DEV $SCRATCH_MNT
 }
 
 _scratch_mkfs_options()
@@ -107,6 +109,15 @@ _scratch_mkfs_options()
     echo $SCRATCH_OPTIONS $MKFS_OPTIONS $* $SCRATCH_DEV
 }
 
+_scratch_mkfs()
+{
+    if [ -z "$FSTYP" -o "$FSTYP" = xfs ]; then
+        _scratch_mkfs_xfs $*
+    else
+        /sbin/mkfs.$FSTYP $MKFS_OPTIONS $* $SCRATCH_DEV
+    fi
+}
+
 _scratch_mkfs_xfs()
 {
     SCRATCH_OPTIONS=""
@@ -544,6 +555,9 @@ _check_filesystem()
        	extra_log_options="-l$2"
         extra_mount_options="-ologdev=$2"
     fi
+
+    [ "$FSTYP" != xfs ] && return 0
+
     type=`_fs_type $device`
     ok=1
     
@@ -645,7 +659,7 @@ _check_scratch_fs()
 [ -d /usr/bsd ] && PATH=$PATH:/usr/bsd
 [ -d /usr/freeware/bin ] && PATH=$PATH:/usr/freeware/bin
 
-if [ "$iam" != new ]
+if [ "$iam" != new -a "$iam" != bench ]
 then
 
     # make some further configuration checks here

setup

@@ -8,10 +8,11 @@ fi
 
 [ "$USE_EXTERNAL" != yes ] && USE_EXTERNAL="no"
 [ "$USE_LBD_PATCH" = yes ] || USE_LBD_PATCH="no"
+[ -x "$FSTYP" ] && FSTYP="xfs"
 
 cat <<EOF
 TEST: DIR=$TEST_DIR DEV=$TEST_DEV rt=[$TEST_RTDEV] log=[$TEST_LOGDEV]
 TAPE: dev=[$TAPE_DEV] rmt=[$RMT_TAPE_DEV] rmtirix=[$RMT_TAPE_USER@$RMT_IRIXTAPE_DEV]
 SCRATCH: MNT=$SCRATCH_MNT DEV=$SCRATCH_DEV rt=[$SCRATCH_RTDEV] log=[$SCRATCH_LOGDEV]
-VARIABLES: external=$USE_EXTERNAL largeblk=$USE_LBD_PATCH
+VARIABLES: external=$USE_EXTERNAL largeblk=$USE_LBD_PATCH fstyp=$FSTYP
 EOF