mirror of
https://github.com/linux-apfs/apfstests.git
synced 2026-05-01 15:01:44 -07:00
xfstests: add a test for btrfs device replace operation
This test performs btrfs device replace tests with all possible profiles (single/dup/mixed/raid0/raid1/raid10), one round with the '-r' option to 'btrfs replace start' and one round without this option. The cancelation is tested only once and with the dup/single profile for metadata/data. This test takes 181 seconds on my SSD equiped test box and 237s on spinning disks. Almost all the time is spent when the filesystem is populated with test data. The replace operation itself takes less than a second for all the tests, except for the test that is marked as 'thorough' which will run for about 8 seconds on my test box. The amount of tests done depends on the number of devices in the SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should be available (e.g. 5 partitions). With less than 2 entries in SCRATCH_DEV_POOL, the test is not executed. The source and target devices for the replace operation are arbitrarily chosen out of SCRATCH_DEV_POOl. Since the target device mustn't be smaller than the source device, the requirement for this test is that all devices have _exactly_ the same size. If this is not the case, the test terminates with _notrun. To check the filesystems after replacing a device, a scrub run is performed, a btrfsck run, and finally the filesystem is remounted. This commit depends on my other commit: "xfstest: don't remove the two first devices from SCRATCH_DEV_POOL" [rjohnston: renumbered to btrfs/011] Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Reviewed-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Rich Johnston <rjohnston@sgi.com>
This commit is contained in:
Stefan Behrens
committed by
Rich Johnston
Rich Johnston
parent
0d3bbd1894
commit
53b73199db
@@ -207,6 +207,7 @@ case "$HOSTOS" in
|
|||||||
export MKFS_UDF_PROG="`set_prog_path mkudffs`"
|
export MKFS_UDF_PROG="`set_prog_path mkudffs`"
|
||||||
export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
|
export MKFS_BTRFS_PROG="`set_btrfs_mkfs_prog_path_with_opts`"
|
||||||
export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
|
export BTRFS_UTIL_PROG="`set_prog_path btrfs`"
|
||||||
|
export BTRFS_SHOW_SUPER_PROG="`set_prog_path btrfs-show-super`"
|
||||||
export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
|
export XFS_FSR_PROG="`set_prog_path xfs_fsr`"
|
||||||
export MKFS_NFS_PROG="false"
|
export MKFS_NFS_PROG="false"
|
||||||
;;
|
;;
|
||||||
|
|||||||
Executable
+277
@@ -0,0 +1,277 @@
|
|||||||
|
#! /bin/bash
|
||||||
|
# FSQA Test No. btrfs/011
|
||||||
|
#
|
||||||
|
# Test of the btrfs replace operation.
|
||||||
|
#
|
||||||
|
# The amount of tests done depends on the number of devices in the
|
||||||
|
# SCRATCH_DEV_POOL. For full test coverage, at least 5 devices should
|
||||||
|
# be available (e.g. 5 partitions).
|
||||||
|
#
|
||||||
|
# The source and target devices for the replace operation are
|
||||||
|
# arbitrarily chosen out of SCRATCH_DEV_POOl. Since the target device
|
||||||
|
# mustn't be smaller than the source device, the requirement for this
|
||||||
|
# test is that all devices have _exactly_ the same size. If this is
|
||||||
|
# not the case, this test is not run.
|
||||||
|
#
|
||||||
|
# To check the filesystems after replacing a device, a scrub run is
|
||||||
|
# performed, a btrfsck run, and finally the filesystem is remounted.
|
||||||
|
#
|
||||||
|
#-----------------------------------------------------------------------
|
||||||
|
# Copyright (C) 2013 STRATO. All rights reserved.
|
||||||
|
#
|
||||||
|
# This program is free software; you can redistribute it and/or
|
||||||
|
# modify it under the terms of the GNU General Public License as
|
||||||
|
# published by the Free Software Foundation.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it would be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program; if not, write the Free Software Foundation,
|
||||||
|
# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
#
|
||||||
|
#-----------------------------------------------------------------------
|
||||||
|
#
|
||||||
|
|
||||||
|
seq=`basename $0`
|
||||||
|
seqres=$RESULT_DIR/$seq
|
||||||
|
echo "QA output created by $seq"
|
||||||
|
|
||||||
|
here=`pwd`
|
||||||
|
tmp=/tmp/$$
|
||||||
|
status=1
|
||||||
|
noise_pid=0
|
||||||
|
|
||||||
|
_cleanup()
|
||||||
|
{
|
||||||
|
if [ $noise_pid -ne 0 ] && ps -p $noise_pid | grep -q $noise_pid; then
|
||||||
|
kill -TERM $noise_pid
|
||||||
|
fi
|
||||||
|
wait
|
||||||
|
rm -f $tmp.tmp
|
||||||
|
}
|
||||||
|
trap "_cleanup; exit \$status" 0 1 2 3 15
|
||||||
|
|
||||||
|
# get standard environment, filters and checks
|
||||||
|
. ./common/rc
|
||||||
|
. ./common/filter
|
||||||
|
|
||||||
|
# real QA test starts here
|
||||||
|
_need_to_be_root
|
||||||
|
_supported_fs btrfs
|
||||||
|
_require_scratch
|
||||||
|
_require_scratch_dev_pool
|
||||||
|
_require_command $BTRFS_SHOW_SUPER_PROG btrfs-show-super
|
||||||
|
|
||||||
|
rm -f $seqres.full
|
||||||
|
rm -f $tmp.tmp
|
||||||
|
|
||||||
|
echo "*** test btrfs replace"
|
||||||
|
|
||||||
|
workout()
|
||||||
|
{
|
||||||
|
local mkfs_options="$1"
|
||||||
|
local num_devs4raid="$2"
|
||||||
|
local with_cancel="$3"
|
||||||
|
local quick="$4"
|
||||||
|
local source_dev="`echo ${SCRATCH_DEV_POOL} | awk '{print $1}'`"
|
||||||
|
local target_dev="`echo ${SCRATCH_DEV_POOL} | awk '{print $NF}'`"
|
||||||
|
|
||||||
|
if [ "`echo $SCRATCH_DEV_POOL | wc -w`" -lt `expr $num_devs4raid + 1` ]; then
|
||||||
|
echo "Skip workout $1 $2 $3 $4" >> $seqres.full
|
||||||
|
echo "Too few devices in SCRATCH_DEV_POOL $SCRATCH_DEV_POOL, required: " `expr $num_devs4raid + 1` >> $seqres.full
|
||||||
|
return 0
|
||||||
|
fi
|
||||||
|
|
||||||
|
# use min number of disks in order to fill up the disk to replace
|
||||||
|
# as much as possible
|
||||||
|
local used_devs_without_1st="`echo $SCRATCH_DEV_POOL | \
|
||||||
|
awk '{ORS=\" \"; for (i = 2; i <= (NF - 1 < '$num_devs4raid' ? NF - 1 : '$num_devs4raid'); i++) print $i}'`"
|
||||||
|
|
||||||
|
# _scratch_mkfs adds the 1st device again (which is $SCRATCH_DEV)
|
||||||
|
_scratch_mkfs $mkfs_options $used_devs_without_1st >> $seqres.full 2>&1 || _fail "mkfs failed"
|
||||||
|
|
||||||
|
# create a filesystem on the target device just for the sake of
|
||||||
|
# being able to query its size with btrfs-show-super
|
||||||
|
$MKFS_BTRFS_PROG $MKFS_OPTIONS $target_dev >> $seqres.full 2>&1 || _fail "mkfs target_dev failed"
|
||||||
|
|
||||||
|
# The source and target devices for the replace operation are
|
||||||
|
# arbitrarily chosen out of the pool. Since the target device mustn't
|
||||||
|
# be smaller than the source device, the requirement for this test is
|
||||||
|
# that all devices have _exactly_ the same size. If this is not the
|
||||||
|
# case, this test is not run.
|
||||||
|
local num_lines=`$BTRFS_SHOW_SUPER_PROG $SCRATCH_DEV $used_devs_without_1st $target_dev | grep dev_item.total_bytes | uniq | wc -l`
|
||||||
|
if [ $num_lines -gt 1 ]; then
|
||||||
|
_notrun "Different device sizes detected"
|
||||||
|
fi
|
||||||
|
|
||||||
|
_scratch_mount
|
||||||
|
|
||||||
|
# Generate 500 times 20K extents in the data chunk and fill up
|
||||||
|
# metadata with inline extents. Ignore ENOSPC.
|
||||||
|
for i in `seq 1 500`; do
|
||||||
|
dd if=/dev/urandom of=$SCRATCH_MNT/l$i bs=16385 count=1
|
||||||
|
dd if=/dev/urandom of=$SCRATCH_MNT/s$i bs=3800 count=1
|
||||||
|
done > /dev/null 2>&1
|
||||||
|
|
||||||
|
if [ "${quick}Q" = "thoroughQ" ]; then
|
||||||
|
# The intention of this "thorough" test is to increase
|
||||||
|
# the probability of random errors, in particular in
|
||||||
|
# conjunction with the background noise generator and
|
||||||
|
# a sync call while the replace operation in ongoing.
|
||||||
|
# Unfortunately it takes quite some time to generate
|
||||||
|
# the test filesystem, therefore most data consists out
|
||||||
|
# of zeros although this data is not very useful for
|
||||||
|
# detecting misplaced read/write requests.
|
||||||
|
# Ignore ENOSPC, it's not a problem..
|
||||||
|
dd if=/dev/urandom of=$SCRATCH_MNT/r bs=1M count=200 >> $seqres.full 2>&1 &
|
||||||
|
dd if=/dev/zero of=$SCRATCH_MNT/0 bs=1M count=2000 >> $seqres.full 2>&1
|
||||||
|
wait
|
||||||
|
elif [ "${with_cancel}Q" = "cancelQ" ]; then
|
||||||
|
# produce some data to prevent that the replace operation
|
||||||
|
# finishes before the cancel request is started
|
||||||
|
dd if=/dev/zero of=$SCRATCH_MNT/0 bs=1M count=1000 >> $seqres.full 2>&1
|
||||||
|
fi
|
||||||
|
sync; sync
|
||||||
|
|
||||||
|
btrfs_replace_test $source_dev $target_dev "" $with_cancel $quick
|
||||||
|
umount $SCRATCH_MNT > /dev/null 2>&1
|
||||||
|
|
||||||
|
if echo $mkfs_options | egrep -qv "raid1|raid5|raid6|raid10" || \
|
||||||
|
[ "${with_cancel}Q" = "cancelQ" ]; then
|
||||||
|
# the -r option has no effect without mirrors, skip -r test
|
||||||
|
# in this case, and if only the canceling should be tested
|
||||||
|
# as well
|
||||||
|
return 0
|
||||||
|
fi
|
||||||
|
|
||||||
|
# One more time with the '-r' option this time. Instead of wasting
|
||||||
|
# time to populate the filesystem with data again, use the
|
||||||
|
# existing filesystem in the state as it is after the previous
|
||||||
|
# replace operation.
|
||||||
|
# If possible, use a strategy to select the source and target
|
||||||
|
# device so that we really change bits on the target disk, see
|
||||||
|
# below.
|
||||||
|
|
||||||
|
# The default: For the 2nd run, the new target drive is the old
|
||||||
|
# source drive, and the new source drive is the old target drive.
|
||||||
|
# Since except for the noise data, the copied data is already on
|
||||||
|
# the new target disk (which is the old source disk), this is not
|
||||||
|
# optimal to check whether data is copied correctly.
|
||||||
|
local tmp_dev="$source_dev"
|
||||||
|
source_dev="$target_dev"
|
||||||
|
target_dev="$tmp_dev"
|
||||||
|
|
||||||
|
# If we have at least one more device in the SCRATCH_DEV_POOL than
|
||||||
|
# used so far, use one of those for the new target devive.
|
||||||
|
if [ "`echo $SCRATCH_DEV_POOL | wc -w`" -gt `expr $num_devs4raid + 1` ]; then
|
||||||
|
target_dev="`echo ${SCRATCH_DEV_POOL} | awk '{print $(NF-1)}'`"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# If the filesystem is built out of more than one devices, use a
|
||||||
|
# different source device for this round.
|
||||||
|
if [ $num_devs4raid -gt 1 ]; then
|
||||||
|
source_dev="`echo ${SCRATCH_DEV_POOL} | awk '{print $2}'`"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# Mount similar to _scratch_mount, but since the SCRATCH_DEV (the
|
||||||
|
# 1st device in SCRATCH_DEV_POOL) was replaced by the previous
|
||||||
|
# btrfs replace operation, substitute SCRATCH_DEV with a device
|
||||||
|
# that is known to be part of the SCRATCH_MNT filesystem.
|
||||||
|
_mount -t $FSTYP `_scratch_mount_options | sed "s&${SCRATCH_DEV}&${source_dev}&"`
|
||||||
|
if [ $? -ne 0 ]; then
|
||||||
|
echo "mount failed"
|
||||||
|
return 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
btrfs_replace_test $source_dev $target_dev "-r" $with_cancel $quick
|
||||||
|
umount $SCRATCH_MNT > /dev/null 2>&1
|
||||||
|
}
|
||||||
|
|
||||||
|
btrfs_replace_test()
|
||||||
|
{
|
||||||
|
local source_dev="$1"
|
||||||
|
local target_dev="$2"
|
||||||
|
local replace_options="$3"
|
||||||
|
local with_cancel="$4"
|
||||||
|
local quick="$5"
|
||||||
|
|
||||||
|
# generate some (slow) background traffic in parallel to the
|
||||||
|
# replace operation. It is not a problem if cat fails early
|
||||||
|
# with ENOSPC.
|
||||||
|
cat /dev/urandom > $SCRATCH_MNT/noise 2>> $seqres.full &
|
||||||
|
noise_pid=$!
|
||||||
|
|
||||||
|
if [ "${with_cancel}Q" = "cancelQ" ]; then
|
||||||
|
# background the replace operation (no '-B' option given)
|
||||||
|
$BTRFS_UTIL_PROG replace start -f $source_dev $target_dev $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "btrfs replace start failed"
|
||||||
|
sleep 1
|
||||||
|
$BTRFS_UTIL_PROG replace cancel $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "btrfs replace cancel failed"
|
||||||
|
|
||||||
|
# 'replace status' waits for the replace operation to finish
|
||||||
|
# before the status is printed
|
||||||
|
$BTRFS_UTIL_PROG replace status $SCRATCH_MNT > $tmp.tmp 2>&1
|
||||||
|
cat $tmp.tmp >> $seqres.full
|
||||||
|
grep -q canceled $tmp.tmp || _fail "btrfs replace status failed"
|
||||||
|
else
|
||||||
|
if [ "${quick}Q" = "thoroughQ" ]; then
|
||||||
|
# On current hardware, the thorough test runs
|
||||||
|
# more than a second. This is a chance to force
|
||||||
|
# a sync in the middle of the replace operation.
|
||||||
|
(sleep 1; sync) > /dev/null 2>&1 &
|
||||||
|
fi
|
||||||
|
$BTRFS_UTIL_PROG replace start -Bf $source_dev $target_dev $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "btrfs replace start failed"
|
||||||
|
|
||||||
|
$BTRFS_UTIL_PROG replace status $SCRATCH_MNT > $tmp.tmp 2>&1
|
||||||
|
cat $tmp.tmp >> $seqres.full
|
||||||
|
grep -q finished $tmp.tmp || _fail "btrfs replace status failed"
|
||||||
|
fi
|
||||||
|
|
||||||
|
if ps -p $noise_pid | grep -q $noise_pid; then
|
||||||
|
kill -TERM $noise_pid 2> /dev/null
|
||||||
|
fi
|
||||||
|
noise_pid=0
|
||||||
|
wait
|
||||||
|
|
||||||
|
# scrub tests on-disk data, that's the reason for the sync.
|
||||||
|
# With the '-B' option (don't background), any type of error causes
|
||||||
|
# exit values != 0, including detected correctable and uncorrectable
|
||||||
|
# errors on the device.
|
||||||
|
sync; sync
|
||||||
|
$BTRFS_UTIL_PROG scrub start -B $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "btrfs scrub failed"
|
||||||
|
|
||||||
|
# Two tests are performed, the 1st is to btrfsck the filesystem,
|
||||||
|
# and the 2nd test is to mount the filesystem.
|
||||||
|
# Usually _check_btrfs_filesystem would perform the mount test,
|
||||||
|
# but it gets confused by the mount output that shows SCRATCH_MNT
|
||||||
|
# mounted but not being mounted to SCRATCH_DEV. This happens
|
||||||
|
# because in /proc/mounts the 2nd device of the filesystem is
|
||||||
|
# shown after the replace operation. Let's just do the mount
|
||||||
|
# test manually after _check_btrfs_filesystem is finished.
|
||||||
|
umount $SCRATCH_MNT > /dev/null 2>&1
|
||||||
|
if [ "${with_cancel}Q" != "cancelQ" ]; then
|
||||||
|
# after the replace operation, use the target_dev for everything
|
||||||
|
_check_btrfs_filesystem $target_dev
|
||||||
|
_mount -t $FSTYP `_scratch_mount_options | sed "s&${SCRATCH_DEV}&${target_dev}&"`
|
||||||
|
else
|
||||||
|
_check_btrfs_filesystem $source_dev
|
||||||
|
_scratch_mount
|
||||||
|
fi
|
||||||
|
}
|
||||||
|
|
||||||
|
workout "-m single -d single" 1 no quick
|
||||||
|
workout "-m single -d single -M" 1 no quick
|
||||||
|
workout "-m dup -d single" 1 no quick
|
||||||
|
workout "-m dup -d single" 1 cancel quick
|
||||||
|
workout "-m dup -d dup -M" 1 no quick
|
||||||
|
workout "-m raid0 -d raid0" 2 no quick
|
||||||
|
workout "-m raid1 -d raid1" 2 no thorough
|
||||||
|
#workout "-m raid5 -d raid5" 2 no quick # not yet supported for btrfs replace
|
||||||
|
#workout "-m raid6 -d raid6" 3 no quick # not yet supported for btrfs replace
|
||||||
|
workout "-m raid10 -d raid10" 4 no quick
|
||||||
|
|
||||||
|
echo "*** done"
|
||||||
|
status=0
|
||||||
|
exit
|
||||||
@@ -0,0 +1,3 @@
|
|||||||
|
QA output created by 011
|
||||||
|
*** test btrfs replace
|
||||||
|
*** done
|
||||||
@@ -13,3 +13,4 @@
|
|||||||
008 auto quick
|
008 auto quick
|
||||||
009 auto quick
|
009 auto quick
|
||||||
010 auto quick
|
010 auto quick
|
||||||
|
011 auto
|
||||||
|
|||||||
Reference in New Issue
Block a user