Make _PySys_AddXOptionWithError() and _PySys_AddWarnOptionWithError()
functions private again. They are no longer needed to initialize Python:
_PySys_EndInit() is now responsible to add these options instead.
Moreover, PySys_AddWarnOptionUnicode() now clears the exception on
failure if possible.
Configuring python with ./configure --with-pydebug CFLAGS="-D COUNT_ALLOCS -O0"
makes "make smelly" fail as some symbols were being exported without the "Py_" or
"_Py" prefixes.
Use the core configuration of the interpreter, rather
than using global configuration variables. For example, replace
Py_QuietFlag with core_config->quiet.
_PyCoreConfig_Read() is now responsible to choose the filesystem
encoding and error handler. Using Py_Main(), the encoding is now
chosen even before calling Py_Initialize().
_PyCoreConfig.filesystem_encoding is now the reference, instead of
Py_FileSystemDefaultEncoding, for the Python filesystem encoding.
Changes:
* Add filesystem_encoding and filesystem_errors to _PyCoreConfig
* _PyCoreConfig_Read() now reads the locale encoding for the file
system encoding.
* PyUnicode_EncodeFSDefault() and PyUnicode_DecodeFSDefaultAndSize()
now use the interpreter configuration rather than
Py_FileSystemDefaultEncoding and Py_FileSystemDefaultEncodeErrors
global configuration variables.
* Add _Py_SetFileSystemEncoding() and _Py_ClearFileSystemEncoding()
private functions to only modify Py_FileSystemDefaultEncoding and
Py_FileSystemDefaultEncodeErrors in coreconfig.c.
* _Py_CoerceLegacyLocale() now takes an int rather than
_PyCoreConfig for the warning.
In some development setups it is inconvenient or impossible to write bytecode
caches to the code tree, but the bytecode caches are still useful. The
PYTHONPYCACHEPREFIX environment variable allows specifying an alternate
location for cached bytecode files, within which a directory tree mirroring the code
tree will be created. This cache tree is then used (for both reading and writing)
instead of the local `__pycache__` subdirectory within each source directory.
Exposed at runtime as sys.pycache_prefix (defaulting to None), and can
be set from the CLI as "-X pycache_prefix=path".
Patch by Carl Meyer.
METH_NOARGS functions need only a single argument but they are cast
into a PyCFunction, which takes two arguments. This triggers an
invalid function cast warning in gcc8 due to the argument mismatch.
Fix this by adding a dummy unused argument.
- new test case for pre-initialization of sys.warnoptions and sys._xoptions
- restored ability to call these APIs prior to Py_Initialize
- updated the docs for the affected APIs to make it clear they can be
called before Py_Initialize
- also enhanced the existing embedding test cases
to check for expected settings in the sys module
* Add coro.cr_origin and sys.set_coroutine_origin_tracking_depth
* Use coroutine origin information in the unawaited coroutine warning
* Stop using set_coroutine_wrapper in asyncio debug mode
* In BaseEventLoop.set_debug, enable debugging in the correct thread
Changes:
* Split _PySys_SetArgvWithError() into subfunctions for Py_Main():
* Create the Python list object
* Set sys.argv to the list
* Compute argv0
* Prepend argv0 to sys.path
* Add _PyPathConfig_ComputeArgv0()
* Remove _PySys_SetArgvWithError()
* Py_Main() now splits the code to compute sys.argv/path0 and the
code to update the sys module: add pymain_compute_argv()
subfunction.
bpo-29240, bpo-32030:
* Rename pymain_set_argv() to pymain_set_sys_argv()
* pymain_set_sys_argv() now creates of copy of argv and modify the
copy, rather than modifying pymain->argv
* Call pymain_set_sys_argv() earlier: before pymain_run_python(), but
after pymain_get_importer().
* Add _PySys_SetArgvWithError() to handle errors
* Add -X utf8 command line option, PYTHONUTF8 environment variable
and a new sys.flags.utf8_mode flag.
* If the LC_CTYPE locale is "C" at startup: enable automatically the
UTF-8 mode.
* Add _winapi.GetACP(). encodings._alias_mbcs() now calls
_winapi.GetACP() to get the ANSI code page
* locale.getpreferredencoding() now returns 'UTF-8' in the UTF-8
mode. As a side effect, open() now uses the UTF-8 encoding by
default in this mode.
* Py_DecodeLocale() and Py_EncodeLocale() now use the UTF-8 encoding
in the UTF-8 Mode.
* Update subprocess._args_from_interpreter_flags() to handle -X utf8
* Skip some tests relying on the current locale if the UTF-8 mode is
enabled.
* Add test_utf8mode.py.
* _Py_DecodeUTF8_surrogateescape() gets a new optional parameter to
return also the length (number of wide characters).
* pymain_get_global_config() and pymain_set_global_config() now
always copy flag values, rather than only copying if the new value
is greater than the old value.
* Py_Main() now starts by reading Py_xxx configuration variables to
only work on its own private structure, and then later writes back
the configuration into these variables.
* Replace Py_GETENV() with pymain_get_env_var() which ignores empty
variables.
* Add _PyCoreConfig.dump_refs
* Add _PyCoreConfig.malloc_stats
* _PyObject_DebugMallocStats() is now responsible to check if debug
hooks are installed. The function returns 1 if stats were written,
or 0 if the hooks are disabled. Mark _PyMem_PymallocEnabled() as
static.
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Don't use "Python runtime" anymore to parse command line options or
to get environment variables: pymain_init() is now a strict
separation.
* Use an error message rather than "crashing" directly with
Py_FatalError(). Limit the number of calls to Py_FatalError(). It
prepares the code to handle errors more nicely later.
* Warnings options (-W, PYTHONWARNINGS) and "XOptions" (-X) are now
only added to the sys module once Python core is properly
initialized.
* _PyMain is now the well identified owner of some important strings
like: warnings options, XOptions, and the "program name". The
program name string is now properly freed at exit.
pymain_free() is now responsible to free the "command" string.
* Rename most methods in Modules/main.c to use a "pymain_" prefix to
avoid conflits and ease debug.
* Replace _Py_CommandLineDetails_INIT with memset(0)
* Reorder a lot of code to fix the initialization ordering. For
example, initializing standard streams now comes before parsing
PYTHONWARNINGS.
* Py_Main() now handles errors when adding warnings options and
XOptions.
* Add _PyMem_GetDefaultRawAllocator() private function.
* Cleanup _PyMem_Initialize(): remove useless global constants: move
them into _PyMem_Initialize().
* Call _PyRuntime_Initialize() as soon as possible:
_PyRuntime_Initialize() now returns an error message on failure.
* Add _PyInitError structure and following macros:
* _Py_INIT_OK()
* _Py_INIT_ERR(msg)
* _Py_INIT_USER_ERR(msg): "user" error, don't abort() in that case
* _Py_INIT_FAILED(err)
The concrete PyDict_* API is used to interact with PyInterpreterState.modules in a number of places. This isn't compatible with all dict subclasses, nor with other Mapping implementations. This patch switches the concrete API usage to the corresponding abstract API calls.
We also add a PyImport_GetModule() function (and some other helpers) to reduce a bunch of code duplication.
A bunch of code currently uses PyInterpreterState.modules directly instead of PyImport_GetModuleDict(). This complicates efforts to make changes relative to sys.modules. This patch switches to using PyImport_GetModuleDict() uniformly. Also, a number of related uses of sys.modules are updated for uniformity for the same reason.
Note that this code was already reviewed and merged as part of #1638. I reverted that and am now splitting it up into more focused parts.
