svn+ssh://pythondev@svn.python.org/python/trunk
........
r79555 | antoine.pitrou | 2010-04-01 18:42:11 +0200 (jeu., 01 avril 2010) | 5 lines
Issue #8276: PyEval_CallObject() is now only available in macro form. The
function declaration, which was kept for backwards compatibility reasons,
is now removed (the macro was introduced in 1997!).
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r79205 | benjamin.peterson | 2010-03-21 12:34:54 -0500 (Sun, 21 Mar 2010) | 1 line
rewrite a bit
........
r79219 | benjamin.peterson | 2010-03-21 14:24:08 -0500 (Sun, 21 Mar 2010) | 1 line
flatten condition
........
r79228 | benjamin.peterson | 2010-03-21 14:35:39 -0500 (Sun, 21 Mar 2010) | 1 line
remove pointless condition
........
r79230 | benjamin.peterson | 2010-03-21 14:39:52 -0500 (Sun, 21 Mar 2010) | 1 line
co_varnames is certainly a tuple, so let's not waste time finding out
........
r79232 | benjamin.peterson | 2010-03-21 14:54:56 -0500 (Sun, 21 Mar 2010) | 1 line
fix import
........
r79233 | benjamin.peterson | 2010-03-21 14:56:37 -0500 (Sun, 21 Mar 2010) | 1 line
don't write duplicate tests
........
r79235 | benjamin.peterson | 2010-03-21 15:21:00 -0500 (Sun, 21 Mar 2010) | 4 lines
improve error message from passing inadequate number of keyword arguments #6474
Note this removes the "non-keyword" or "keyword" phrases from these messages.
........
r79237 | benjamin.peterson | 2010-03-21 15:30:30 -0500 (Sun, 21 Mar 2010) | 1 line
take into account keyword arguments when passing too many args
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r75982 | mark.dickinson | 2009-10-31 10:11:28 +0000 (Sat, 31 Oct 2009) | 5 lines
Issue #6603: Fix --with-tsc build failures on x86-64 that resulted
from a gcc inline assembler peculiarity. (gcc's "A" constraint
apparently means 'rax or rdx' in 64-bit mode, not edx:eax
or rdx:rax as one might expect.)
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73750 | benjamin.peterson | 2009-07-01 19:45:19 -0400 (Wed, 01 Jul 2009) | 1 line
small optimization: avoid popping the current block until we have to
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r72487 | jeffrey.yasskin | 2009-05-08 17:51:06 -0400 (Fri, 08 May 2009) | 7 lines
PyCode_NewEmpty:
Most uses of PyCode_New found by http://www.google.com/codesearch?q=PyCode_New
are trying to build an empty code object, usually to put it in a dummy frame
object. This patch adds a PyCode_NewEmpty wrapper which lets the user specify
just the filename, function name, and first line number, instead of also
requiring lots of code internals.
........
r72488 | jeffrey.yasskin | 2009-05-08 18:23:21 -0400 (Fri, 08 May 2009) | 13 lines
Issue 5954, PyFrame_GetLineNumber:
Most uses of PyCode_Addr2Line
(http://www.google.com/codesearch?q=PyCode_Addr2Line) are just trying to get
the line number of a specified frame, but there's no way to do that directly.
Forcing people to go through the code object makes them know more about the
guts of the interpreter than they should need.
The remaining uses of PyCode_Addr2Line seem to be getting the line from a
traceback (for example,
http://www.google.com/codesearch/p?hl=en#u_9_nDrchrw/pygame-1.7.1release/src/base.c&q=PyCode_Addr2Line),
which is replaced by the tb_lineno field. So we may be able to deprecate
PyCode_Addr2Line entirely for external use.
........
r72879 | jeffrey.yasskin | 2009-05-23 19:23:01 -0400 (Sat, 23 May 2009) | 14 lines
Issue #6042:
lnotab-based tracing is very complicated and isn't documented very well. There
were at least 3 comment blocks purporting to document co_lnotab, and none did a
very good job. This patch unifies them into Objects/lnotab_notes.txt which
tries to completely capture the current state of affairs.
I also discovered that we've attached 2 layers of patches to the basic tracing
scheme. The first layer avoids jumping to instructions that don't start a line,
to avoid problems in if statements and while loops. The second layer
discovered that jumps backward do need to trace at instructions that don't
start a line, so it added extra lnotab entries for 'while' and 'for' loops, and
added a special case for backward jumps within the same line. I replaced these
patches by just treating forward and backward jumps differently.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73614 | benjamin.peterson | 2009-06-28 11:08:02 -0500 (Sun, 28 Jun 2009) | 1 line
add two generic macros for peeking and setting in the stack
........
r73615 | benjamin.peterson | 2009-06-28 11:14:07 -0500 (Sun, 28 Jun 2009) | 1 line
use stack macros
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r72912 | benjamin.peterson | 2009-05-25 08:13:44 -0500 (Mon, 25 May 2009) | 5 lines
add a SETUP_WITH opcode
It speeds up the with statement and correctly looks up the special
methods involved.
........
r72920 | benjamin.peterson | 2009-05-25 15:12:57 -0500 (Mon, 25 May 2009) | 1 line
take into account the fact that SETUP_WITH pushes a finally block
........
r72940 | benjamin.peterson | 2009-05-26 07:49:59 -0500 (Tue, 26 May 2009) | 1 line
teach the peepholer about SETUP_WITH
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r73064 | antoine.pitrou | 2009-05-30 23:27:00 +0200 (sam., 30 mai 2009) | 4 lines
Issue #5330: C functions called with keyword arguments were not reported by
the various profiling modules (profile, cProfile). Patch by Hagen Fürstenau.
........
svn+ssh://pythondev@svn.python.org/python/trunk
........
r69811 | collin.winter | 2009-02-20 13:30:41 -0600 (Fri, 20 Feb 2009) | 2 lines
Issue 5176: special-case string formatting in BINARY_MODULO implementation. This shows a modest (1-3%) speed-up in templating systems, for example.
........
r69947 | jeffrey.yasskin | 2009-02-24 16:48:34 -0600 (Tue, 24 Feb 2009) | 3 lines
Tools/scripts/analyze_dxp.py, a module with some helper functions to
analyze the output of sys.getdxp().
........
This patch by Antoine Pitrou optimizes the bytecode for conditional branches by
merging the following "POP_TOP" instruction into the conditional jump. For
example, the list comprehension "[x for x in l if not x]" produced the
following bytecode:
1 0 BUILD_LIST 0
3 LOAD_FAST 0 (.0)
>> 6 FOR_ITER 23 (to 32)
9 STORE_FAST 1 (x)
12 LOAD_FAST 1 (x)
15 JUMP_IF_TRUE 10 (to 28)
18 POP_TOP
19 LOAD_FAST 1 (x)
22 LIST_APPEND 2
25 JUMP_ABSOLUTE 6
>> 28 POP_TOP
29 JUMP_ABSOLUTE 6
>> 32 RETURN_VALUE
but after the patch it produces the following bytecode:
1 0 BUILD_LIST 0
3 LOAD_FAST 0 (.0)
>> 6 FOR_ITER 18 (to 27)
9 STORE_FAST 1 (x)
12 LOAD_FAST 1 (x)
15 POP_JUMP_IF_TRUE 6
18 LOAD_FAST 1 (x)
21 LIST_APPEND 2
24 JUMP_ABSOLUTE 6
>> 27 RETURN_VALUE
Notice that not only the code is shorter, but the conditional jump
(POP_JUMP_IF_TRUE) jumps right to the start of the loop instead of going through
the JUMP_ABSOLUTE at the end. "continue" statements are helped
similarly.
Furthermore, the old jump opcodes (JUMP_IF_FALSE, JUMP_IF_TRUE) have been
replaced by two new opcodes:
- JUMP_IF_TRUE_OR_POP, which jumps if true and pops otherwise
- JUMP_IF_FALSE_OR_POP, which jumps if false and pops otherwise
on compilers that support it (notably: gcc, SunPro, icc), the bytecode
evaluation loop is compiled with a new dispatch mechanism which gives
speedups of up to 20%, depending on the system, on various benchmarks.
